ANEX Ultra Low Profile Offset Screwdriver Set 3 Piece, 90 Degree Straight Slim Plate For Tight Area, Made in Japan, Black

These screwdrivers enabled us to fix the track of our Isuzu Rodeo's moon-roof. The glass is held in by screws that have about half an inch of space under them, and no mechanic or dealership in our area would attempt to remove them, in fear of cracking the glass. These screwdrivers easily fit into the tight spot, allowing us to remove the glass, fix the track, and put the glass back in. Make sure you get some suction cups that are used for removing iMac screens-- we bought ours at iFixit, but maybe they're sold on Amazon as well. These screwdrivers are essential for the "second tool box," where we have odd, useful, often sanity-saving tools. The construction is so rugged that, with the tips in place, they feel like one-piece machined construction. Rarely do I encounter a product that is so well worth the price and something better to have, and not need, rather than need, and not have... and you will!

Low profile drivers are perfect for small tight places.

I recently had a small home repair project under the sink fixing a water leak at the drainpipe for my garbage disposal. Of course, the pipe retaining screw was positioned directly under the 90 degree elbow and required an off-set Phillips screwdriver. I actually had an off-set screwdriver in my toolbox, I don't think it had ever been used. Well guess what? It still hasn't been used because it was too long to fit in the space I had to work with. I was able to do a temporary fix with some JB Weld epoxy and went on an Amazon search for some low profile screwdrivers. I ordered these and they arrived the same day as my JB Weld patch job failed. This off-set screwdriver set saved the day. These have to be the shortest low profile off-set screwdrivers ever made!! The quality is very good and the Phillips head bit fit very securely in the screw head. I know these will last a lifetime because I'll probably never use them again!!

These are some of my favorite tools. It is rare that I need them (maybe once a month) in my line of work but when I need them, they truly are life savers. I've had these over a year and they have saved me dozens of hours of my time. This is one of those things that when you need them, nothing else is an option. They have saved me from taking entire pieces of equipment apart just to make a simple adjustment. I really cant describe how much headache these have spared me from. One thing I did is replace the key ring with a small bright carabiner. This is just an easier way to clip them somewhere in my pouch or bag to keep them from getting lost. There small all black size can lead to them getting lost in your tool bag. Another helpful tip is to use the hole in the handle of the one your using with a lanyard. I have needed this on a lift 30 feet in the air and they can get pretty easy to drop because 9 times out of 10 if you have to use these it will be in an awkward position. Even if you are just on a ladder or on the ground I find using these with a lanyard to be a bit easier due to the awkward position your hand usually finds itself in. I wish they made these in different fastener sizes. Anex if your reading full torx, and full metric and standard hex, and precision sizes would be a godsend.

These little guys are a bit pricey, but definitely qualify as a niche tool that you probably wont find yourself needing very often. I've got a custom watercooled desktop and had to replace the front three fans without wanting to drain/disconnect the loop (so, remove them while leaving the radiator in place). Problem is, I only had a narrow gap between the screw heads in the front of the fans and the glass shield on my case. Luckily, the ANEX Low Profile Screwdriver Set, with enough patience, was able to remove and replace the screws given the tight quarters I was dealing with. I'll probably never use them again, but they held up to that job and for that they were worth it. Quality seems sufficient for occasional use over a few years though, if I were to guess.

This set is a valuable addition to your tool box; perfect for those times when a screw is located in a difficult to reach spot where there is little overhead clearance such as MAF sensor screws on some cars - the low profile design can get in to those spaces and loosen the screws which will save time by not needing to remove the air cleaner housing or other parts to be able to gain access. High quality, made in Japan. Worth getting

This offset screwdriver set is well made and very low profile. The tools are good and strong and will do the job.

Why did you pick this product vs others?: Excellent little set for super tight spaces, like working on car seats. They're pretty heavy for what they are, too. Definitely great quality.

These are really low profile which is exactly what I was after. Allow you to access screws in tight spaces and they're well made. Japanese precision :) And I also received a tiny little origami crane! Worth waiting.

網戸の位置調整のために購入した 狭い隙間にも容易に入っていくので助かる てこの原理で絞めたりゆるめたりがとても簡単なのにも驚かされた

Cumplen su función, perfectos para alcanzar lugares pequeños aunque un poco complicado el agarre, me parece que las puntas se barrieron un poco con la fuerza pero aun funcionan bien

Artikel genau beschrieben, zügiger Versand

Good quality, exact what we need.