3M 2080 Series S120 Satin White Aluminum - 5ft x 1ft - Dual Cast Car Wrap Vinyl Film and Controltac Air Release Adhesives - Bubble Free Sheet Roll for Vehicles, Rims and Signs

Great quality and easy to work with. I wrapped the machined faces on my wheels and worked great

The media could not be loaded. This was very easy to use! Made sure to prep the area (wash and rubbing alcohol). Measured and cut to size. Applied and used my tuck tools. Before making the final cut, I used a heat gun to relax the wrap (it stretched enough to allow for extra movement around edges). Cut and pressed with tuck tools. End result is amazing!!Adhesive is very strong. Definitely be careful when applying the heat gun. Once heated wrap sticks to itself it makes it hard to pull apart. Make sure that you’re at the final step of your work when using heat.

This automotive vinyl film is top-notch! The quality is fantastic, and it’s incredibly easy to apply. It provides a smooth, professional finish, making my car look sleek and modern. The adhesive is strong, yet it doesn't damage the paint when removed, which is a huge plus. The vinyl film is also durable and holds up well against the elements. Whether you’re using it for wrapping parts of your car or as an accent, it’s a great choice. Highly recommend this for anyone looking to add a custom touch to their vehicle!

So I was doing this to repair chips on my fender flare on the bed of my pickup. I had cut out a template, and then trimmed the vinyl to match. I then laid it out to make sure it was the right size.When I was going to apply it, it took a very VERY long time. If you want a smooth surface on the vinyl and you are working with something that has any curve, be prepared to struggle with this. It does not apply so easily like the little instruction card. I would NEVER attempt to use this on a whole car, it would look like crap because you CANNOT and I mean, CANNOT get a wrinkle or little bubble free surface.Don't get me wrong, it still looked good, but since I am so AR any little bubble was a failure to me. And heating it up after, does not smooth it out, and DO NOT try to heat it while applying, it gets super thin and then sticks to itself very easily, it get about as thin as plastic wrap if you try to heat it while applying.But, for my purposes, it did a good job, the pitted paint is hidden, and the lines on the vinyl will be blackened by my polish (there is a slight white line from where you cut the vinyl, and it is very clear on a black truck)Pros: High Gloss finish looks good, parts that were flat are flawlessCons: Hard to work with if you are not on flat, top layer of clear plastic does not stay on and then causes issues with application, NOT POSSIBLE to do a wrinkle free bubble free installation on any curved surface (unless you are a professional I suppose) Limited Ikea like instructions.

Great coverage

Great film, thick with a protective film on top which makes for a easier to lay down. Shipped super fast also.

I used VViViD vinyl wrap on my trucks interior before ordering this wrap to replace that vinyl after only a few months of the initial wrap. I read many great reviews suggesting that this wrap is far superior to VViViD vinyl. Neither of these wraps are great in my opinion. VViViD was much easier to apply; however, when the heat began their wrap started to lose its adhesiveness, leaving me no choice but to replace it. RVinyl is thicker which is nice but I am unable to get it to adhere to the items I am wrapping throughout my truck. I see that it is 3M, but it is absolutely junk.Carbon fiber:The carbon fiber look is very nice.Texture:It appears and feels like actual carbon fiber.

I'm looking for a dark matte red and I had no idea how hard this would be. I know they say colors look different online but with the amount of things I buy on Amazon, I've had maybe a handful of encounters where colors didn't match.Regardless, the red looked perfect on here. Even better than I was willing to settle for. It came and I was a little shocked at first. I just stood and stared at it. It seriously made me immediately think of christmas wrapping paper. A deep maroon with a deep shine. Like velvet. I think I could have done it if the shine aspect wasn't in it.I've gone through three colors on here. My best advice even though I didn't want to, was buy the sample cards on anything you want to try. Bring them out into the sun if they are going to be put in or outside of your car. When you see the difference from online and in person you'll thank yourself for not wasting time ordering something and thinking you're going to start your project. Yeah it's a couple bucks and I do NOT like "wasting" money but after ordering three colors and having to send back, I'd slap myself in the head when I started looking for the vinyl. Don't pass up the opportunity. For those that don't have the options, scour the reviews for comparisons of what the reviewer said the color looked like. Check out the pictures too. See if they offer free returns and if no pictures or free returns, gotta make the hard decision.The product itself is great. I've never had a hard time with 3m 1080 or 2080. 1080 is more forgiving because it's thinner but if you stretch it too much it tears or makes stretch lines. 2080 needs more manipulation but it is not difficult and you can stretch it out a bit more to save any mistakes or difficult spots. Either one you're good and it takes practice. I can't tell you how much I've gone through. Yeah I'm a perfectionist but also noob. If you can take the trim off your car, do it! If not, damn it's a mother. You can't get around corners and "lock" it in as much or stretch it to lay smooth and grap the edges. Sometimes you can get away with it and others you can't. BE PATIENT with yourself and when you start telling yourself you suck, just remember everything new takes time to learn. And sometimes, even the professionals will tell you, I wouldn't do that either. (I have a guy who PPF'd my truck and he laughed (politely) and gave me kudos for still going at it. Hey, it's turned into a hobby and some stuff has actually worked!Sorry for the rant. Just check the colors and if you're not winning, sometimes the wrap professionals are the best source. Make a visit and they'll be happy to show you the insane amount of colors. If you get a bad vibe, go somewhere else.Good luck and happy wrapping!