EVO-STIKFlooring Adhesive, High Strength water-Based Rubber/Resin Glue for PVC, Cork, Linoleum, Carpet & More | Solvent-Free | Indoor Use, Fast Setting, Ready to Use, 2.5L

Seemed to work well Installing altro flooring in my van. This size tub was needed for a lwb transit, and provided ample adhesive, I wouldn't try and stretch the smaller tub for a lwb. Hope that helps another van converter as I had no idea what to use 😅It came with a mini spreader but I didn't realise and had ordered a bigger one at the same time.

Great product, really easy to lay the laminate on, i found it easier to apply to the back of the boards rather than the floor. Just need a decent spreader to go with it. has been down for a while now and flooring seems to be well secure still. Was one of the cheaper options but definitely did the job

Pleased with the results.. I used on vinyl floor tiles and the end result is good. It did take over 24 hours to dry and was quite messy. This did mean when flooring was laid the tiles could be easily moved and manipulated into place. However. I couldn’t not use the bathroom so had to walk on flooring before set and the tiles continued to move during this time and had to be realigned constantly. Would definitely recommend using on a floor that could be left uninterrupted while setting. Every time I walked on floor residue would squeeze out between tiles and this was sticky and looked messy. A few days on they are set firmly in place and all residue cleaned away, but the process was a bit messy and laborious.

This adhesive worked grated for laying out flooring in the kitchen. It's was easy to use and really sticks the floor down well. It was quick at drying and amazing value for money.

It is the right adhesive for my wetroom floor covering

Well this does do the job, but 2 hours dry time? - optimistic at best.I have worked with many adhesives and sealants but I have to say this has to be one of the most awkward and infuriating I have come across.I used it to fix vinyl planks to a synthetic coated insulated floor.I followed the instructions for the first plank, this was a huge mistake. The tile oozed out glue everywhere and sat far too proud, I had to scrape virtually all the glue off. The glue is extremely sticky, you only need a very thin coat not the liberal amount recommended.I found that you had to put on very little and comb it out with the provided scraper.You must clean down as much as you can as you go along, this stuff smears everywhere, I used a cloth covered in sealant remover, this seemed to work well. (TRY IT ON A SPARE PIECE FIRST TO ENSURE IT DOES NOT TAKE THE COLOUR OUT OF THE TILE)Also mind that this glue is supposed to dry in 2 hours, absolutely not. It took 10 days before the tiles were anything like set, this was in a room with an ambient temperature of around 17 degrees. Up until this point glue oozed from the seams as soon as any pressure was applied.On the plus side once the glue had set, it was solid. It dries to a brown finish which for me as I laid light oak coloured tiles was a bonusFor ease of use and drying I would rate this glue 1 star, but because it did eventually dry and stick well I have pushed it up to 3.If I ever had to vinyl tile again, I would certainly be looking for an alternative.

I used this adhesive on my tiles. It was enough to cover my floor and have half left over. Stuck the tiles very well. Reasonable cost.

Used to stick vinyl tiles on to wooden floor did the job 👍