HEADLIGHTSDEPOT Chrome Housing Halogen Headlights Compatible with Chevrolet GMC Blazer Silverado C/K 1500 2500 3500 Suburban HD Chevy Pickup JIMMY/YUKON 150 Includes Left and Right Side Headlamps

Ordered for husband's truck. Fit great and he liked them

Packaged well from seller, but it didn't matter, packaging was still damaged by ups - they could crush a steel box. Items appear undamaged.Took a week to arrive, but shipped free.Built well and match near identical to the factory headlight assemblies they are to replace (1990 Silverado).The components seem well made, crystal clear lenses without being obnoxiously chromed (fad of the year).Install takes approx. 30minutes if you know what you're doing - for those that don't, I'll post a brief step-by-step at the end of the review.These work well and are well worth the money.Headlight assemblies appear sealed and well made. Has the 4 adjustment points just like oem (horizontal, vertical, left/right side lateral (body-alignment) screws (T20 star for light adjustment, 3/16" socket for lateral). Headlights include hi/low bulbs and sockets, which is nice.Overall, if you don't mind the wait, these should work well, and the price is on point.INSTALLATION:These -do- require removal of grill assembly! Just a heads-up.Grill removal:(8) 10mm bolts: 2 on top facing down, 2 on top facing in (from front of truck, towards motor/top of radiator), 1 recessed, center top inside grill (vertical support/above bowtie), 1 center bottom inside grill (vertical support/below bowtie. Remove blinker assemblies (4 T20 screws/each). 2 (1 each side, behind blinker assemblies).Twist/unlock corner marker lights (1 each side).Tilt grill assembly, top out. Next to where the lower/center bolt was is a guide pin - ease this out as you tilt the grill to avoid sheering it off. Remove grill and set aside.**now is a good time to brush out/clean/repair the fins of your radiator/a.c.condensor/oil&tranny coolers**There are 4 10mm bolts holding each headlight assembly to the front clip. Once those are removed, disconnect each electical connector (it helps to let them hang in the order they are connected - outside/tan wire is low beam, inside is hi-beam).Installation is reverse of above.**hints/tips/tricks**Light assemblies are marked "L/R" - "L" is driver side, "R" is passenger.Radiator/condensor Fin tools are handy, and I highly recommend using a set to straighten/repair them while the grill is off. GM is a 13 fin per inch.Check, clean sockets and bulbs at this time - use a small flathead screwdriver to clean contacts - I highly recommend dielectric grease in each connector to prevent future problems)Do not overtighten the bolts or adjustment screws! Soft plastic and metals strip easy. Good rule of thumb for these: hand tighten + 1/8th turn w/ socket.These -will- be out of alignment after install. Find a level spot to park roughly 10 feet away from and squared w/ a building/wall (cinderblock/brick and siding is great)Adjust lateral screws first (the ones that stick up and use 3/16 socket. These square the headlight assembly in the "pocket" of the grill.Adjust vertical T20 screw - light on wall should be at approx waist height on wall (from 10ft away).Adjust horizontal T20 screw - light on wall should be roughly in line with top edge of fender (cheek on fender near hood-spring/looking forward towards wall).Adjust as needed for comfort but also keep in mind that adjusting too hi or out can create a hazardous driving condition for you and others (blinding other drivers, improper road illumination [dark-spots] etc).

Love how thrilled my father was to receive this gift. He installed them into his GMC and 2 years later they're holding strong.

I was well pleased with this purchase as it was a good value. Easy installation with no modifications what so ever. The only reason I didn't rate it a five star is because I am having some trouble adjusting the way the light shines down the highway. It seems to be shining in a random direction that I am having difficulty adjusting out. I am still working that problem out and if it gets better, I will re-evaluate my rating. I would and have recommended them to others.

I put them on my 92 gmc and they look great Definitely worth the money

Stop, do not shop for better product. These are perfect direct fit and you are replacing your ENTIRE lighting setup for the price of one lens.. Almost a 70% savings on OEM pricing. Headlights Depot did a great packaging job, fast ship. Clear lens make my 97 GMC look brand new. Clear and amber lens have good beam pattern.

On edit: customer service contacted after failure/leak. They replaced our purchase with working headlights. I did have to reach out, and we did have twice the work. But customer service was as it should be. That's about all you can ask for once a part fails. *** Installed but full of water after first rain. The water does not drain out. Light bounces off the water so it's weird and wavy. The bulbs are naturally hot when on. When you hit a bump, the water in the headlight splashes up, hits the hot bulb, and the temperature difference pops the bulb. At this rate we are going to get pulled over for no headlights. Not sure what to do - I've never seen anything like it. Didn't have rain until after the return period was up. Took on water the first time it rained. Lifetime home mechanic. Update: company is working with us after we reached out. Customer service Rep Elizabeth was easy to deal with and helpful. Hopefully replace headlights arrive next week!

I have a 1996 Suburban with very dim headlights. Replaced the bulbs but still was very dim. I decided to replace the housing itself, even though it didn't look that dirty, but it completely solved the issue. Not that hard to install, just a little tricky.

Now I can see no lens cleaning for a while