AmeriLiteLED Halo Bar Projector Replacement Halogen Car Headlights Set For Ford F-150/F250/F350/Bronco - Passenger Right and Driver Left Side, Vehicle Light Assembly, Black

Direct fit on a 1994 f350 xlt. No issues at all. Getting the chips to plug into the original light harness can be a pain but I used electric cleaner to add lubrication. Overall light output 6/10 but 10/10 compared to stock. Haven't adjusted yet but seems straight forward. No condensation issues, great packaging, fast delivery, 45 minute install without adjustments. Almost spot on factory look.

Lights are awesome. Some scuff marks were on mine when I got them but nothing really that couldn’t come off by wiping. Lighting is good. To everyone saying that the lights must be removed to adjust them please read this. Yes the adjustment screw as seen in the pictures is hidden by the radiator support when it is installed. Thus making you believe the only way to aim the headlights up or down is to remove them again and again. But if u see in my screen shots there is actually a channel on the lights on the back. That channel is a guide for a screwdriver. It leads to the gear behind the adjustment screw as seen in my other screen shot. Once the headlights are installed the guide channel aligns where the factory headlight adjustment would be. As seen in my picture. All you need is a long Philips screw driver to reach that gear and as you turn the screw driver it turns the gear and adjusts the beam. No need to remove it. Both headlights turn counterclockwise to adjust down and clockwise to adjust up. You may need to play a little with the screwdriver if it doesn’t turn for you as it might not be on the gear and may be on top of the adjustment screw. You want to be inside of the washer on the screw to be able to turn the gear. Hopefully my explanation and pictures help.Just an update on people complaining about quality and durability. I rolled over in my truck 3 times. Totaled it and the only things to survive were the headlights. They were on when it was upside down and not a crack in them. If I ever get an OBS ford again I will definitely be buying these headlights again.

Look very nice

Going from 4 pieces to 1 was the best decision ever! It was a little difficult to mount them at first, but I’m obsessed with how these look! I’d love to see these with a chrome bezel option in the future.I didn’t need to adjust them at all. I have almost a 10” lift of my truck for reference! I can see better at night in my truck than my car now!!

First of all the packaging was great from the perspective of protecting the product.The headlights look better in person than they do online.Installation wasn't bad but I watched a number of videos prior to getting them in. The I put a small spacer (1/4") on one of the bolts behind the headlight/between the mounting surface and that took all the play out. This helped the fit of the headlight considerably.The two small connections for the DRL lights can hook directly into the existing harness but the will only function if the headlight switch is in the middle position.I ran power from the DRL fuse in the engine compartment. So now the DRL lights come one once the key is turned over.There is a very clean line when the headlights are on but the visibility with the supplied bulb was less than I was hoping.Overall, I am happy with the product. The quality appears to be great. I think it has a lot of value for the price.Likely I will replace the supplied bulb for an LED style.

I’ve installed chinsey cheap headlights before and these ain’t them. Absolutely no slop and they look like they’ll adjust well (I haven’t checked it yet). They feel like $300+ ones, very solid. Everything is plug and play, they even give you the different bulbs you need. I do wish they had a wiring diagram for it, but it doesn’t matter because if the connection fits, it’s the right spot (the side marker lights are interchangeable and use the same plug). Also the bulbs for the low beams are a bit dim, but those are easily upgraded. I have payed more for less quality before and would recommend These to any obs owner

Easy 1 piece design to install using all the original plugs on the truck so I didn't have to modify anything to install. I did Remove all the incandescent bulbs and replace them with LEDs so I did have to cut and form dust Covers to fit around LED Cooling fans but have not had any Moisture intrusion issues to this point (Been a few months) With these having Projector type lenses I can use high Lumen LEDs without blinding on coming drivers and all the extra light is focused and directed strait ahead at the road where it is needed and not into trees, and sky ect. The High Beams still light everything up like the morning sun with LED upgrades so everything is visible. To Compensate for LED Turn signals I used LED Tail lights with a built in Ballast resister so Lights would blink normal speed. I Just love they way they Modernize the old Bronco but still keep its classic look.

I went to put them in and noticed that one of the dowels for holding the entire fixture in the vehicle was snapped off. Luckily I have a plastic welding tool and fixed it. I didn't Necessarily want to wait for a new one to come. Just letting you know that it was broken. Otherwise they are pretty awesome and look great. And they are so bright. It's awesome!