12" LP 7" EP Vinyl Records Bracket for 6L Ultrasonic Cleaner Simple Version(No Ultrasonic Cleaner)

I have an extensive record collection of LPs, 45s, and 78 rpm records. I have been collecting records since I was 5 years old, and I still have some of them. Over the years, I have tried all kinds of surface cleaners and brushes and solutions that made the record look nice, but the sound quality didn't improve very much. Along came CDs, and my record collections just sat on the shelf, hardly being touched, while I started to establish quite a CD library. Everyone talks about the warm sound that vinyl has compared to CDs, (and I remembered that back in the day) but when I dug one out and flopped it on the turntable, it just didn't have that sparkle and clarity that I remembered. Plenty of clicks and pops and surface noise were still there, growing it seems while the record was in its paper sleeve. I was getting ready to put the record collection up for sale to get rid of the clutter, but thought that I should make an attempt to shine them up to make them more appealing to the buyer. As I said, I had used all kinds of record cleaning cloths and devices that didn't really make much difference to the sound quality. So I decided to give it one more shot and looked at what was available on Amazon. I knew ultrasonic tanks were one of the best deep cleaning devices on the market, but I had never even considered it for cleaning records. The tanks were a little pricey, but not out of my league completely. Then when I discovered this record turning bracket I thought it would be a necessity in this cleaning process. It had good ratings, looked nice and sturdy, so I decided to give it a try. This does not come with an ultrasonic cleaner, it merely spins the records slowly while the ultrasonic sound waves do their job. I was concerned about the labels getting wet, but the water seems to stay within the grooves of the record and don't ever run across the label. There are many ultrasonic tanks on the market, so after a lot of research, I bought one priced close to the cost of this spinner. That brought the tank and spinner up to around $300, but when I priced the sets that included the tank and the spinner together, they were much more.I set everything up, filled the tank with filtered water, set the timer for 5 minutes, and starting cleaning. After they came out of the tank, I dried them with a microfiber cloth, and built a drying rack to let them dry thoroughly. When I put the first 25 year old record on the turntable, I was absolutely blown away. Gone were the clicks and pops from surface noise, and because ultrasonic cleaning goes into the groove and removes all that dirt and dust that was packed in there, (that I had forced into said groove while I thought I was doing the record a favor by wiping it with all kinds of brushes and rags) the fidelity was unbelievable! I have always taken care of my records, but they still sounded like old records do after awhile. After cleaning them, I could not detect any surface noise at all between cuts. It could have been a CD I was listening to. After running about 200 LPs through the process, I started on the hundreds of 78 rpm records. They clean up so well, that there is hardly any surface noise at all. Suddenly I was hearing the fidelity of this record as if I had just bought it brand new.Bottom line: I have run over 500 records through the tank using this unit, and it continues to operate flawlessly. It is definitely worth the money, in my opinion. Yes, yes, yes, buy this unit and get an ultrasonic tank as soon as possible and get ready to be amazed by your record collection again.

Note this unit is optimized for vinyl, specifically rpm 1 or less. Well built and comes with label protectors with rubber edge protectors to make them waterproof. Also two records at a time optimized the cleaning of a 6L unit to less than 10min for two records. Works very well.

Works great, but spins way too fast with the included power supply. I'm using mine with an inexpensive variable power supply that can be dialed down to less than 1V. I haven't timed its RPMs, but it's SLOOOOOOOOOOW and steady.I've had excellent results cleaning one record at time in distilled water and Tergikleen solution -- 30C for 15 minutes, followed by a spray rise with distilled water (leave record on detached spindle* and spray over a drip pan). I'm sure drip drying is fine, but I finish with a quick spin under the Pro-Ject RCM vacuum.I don't mess around with the tiny hex set screw -- it's not necessary when cleaning a single record at slow speeds (you'll only drop that tiny wrench into the tank once) :)

There are very few options in the market for a spinner to deep clean LP records using an ultrasonic tank. This one is a very well thought of, well designed and well executed piece of aluminum machinery. I echo all the positive reviews. The included wall wart is 12 Volts, but it makes the spinner rotate fast and LOUD!. I use a 5 Volts instead and now it spins slower and SILENT!!!! You can clean two records at a time. I set my ultrasonic tank at 15 minutes, that's all you need. Highly recommended and the price is right for the quality you get.

Turns the perfect speed, fit my ultrasonic cleaner perfectly.

The media could not be loaded. Ok, so I just got this today (5 FEB 2021) and haven't had a chance to use it yet, because I'm still waiting on my ultrasonic cleaner to get delivered. But, everything about it AND the package that it came in is solid as a rock, nothing cheap about any of the materials! Nice hard foam in the box to hold the contents in place and the box itself is even nice, solid. They didn't got cheap on anything! I included a video so you can at least see at what rate of speed the records turn (there is only one speed, as far as I know, haven't read the whole manual yet). Even the button switch to turn it on feels solid and gives a nice stiff click, not wobbly at all. The spindle that holds the records likewise is solid and very nice materials. I'm very impressed. I just hope that they didn't go cheap on the DC motor, I guess time will tell.I'll try to come back after actually using it with my ultrasonic cleaner to add to my review. But from what I've seen it's going to work like a champ. I might add rubber ends to the screws to make sure the screws don't damage the tub on my ultrasonic cleaner.

I bought extra label protectors from the same company and since this says it's for both 7 and 12 inch records I figured the ones for the 7 inch label would be the same because the 12 inch label protectors are black. I was wrong. Wish they could send me 3 of the smaller ones to replace the bigger ones that came with this unit

After 100 cycles, working perfect!