intec bracketsSuper Strong Adjustable Tilt TV Wall Bracket Rated to 75Kg and Tested to 225kg. For TVs 46" - 85", VESA compatible up to 800x400mm

Hung a 65 inch LCD TV with no problem. Plenty of holes to match your wall studs. All the screw etc you should need are included. Used the built in spirit level and double checked with my own - both spot on. Used the spaced between top and bottom of the mount plates to install power and connection sockets. Heavy duty, top quality. The tilt option with its lock function can in handy as the TV was mounted high.

I have fitted a lot of TV brackets, this is the strongest and most well build tv bracket I have fitted, I would definitely recommend it.

Excellent to go across x3 400 mm centres on stud walls

Very easy to fit and the TV sat on it with very little effort other than a 2 Person lift. The only slight issue is the locking screws at the bottom of the bracket, the is absolutely no way you can tighten these up with a large TV.

Excellent bracket. Holds Samsung 75 led no problem. I used the supplied spacers but used my own hollow wall anchors 8 of them via plasterboard only not into any partitions. Been up 6 months now and it's rock solid

This is a great tv bracket, quick and easy to install, and with a but in spirit level so you can get it level without guessing, this bracket has been screwed onto a piece if MDF wood as it is supporting a 75" tv, and no problems at all.

This mount, well at least the wall mount component is easily strong enough for my 75" Sony monster TV. The brackets that attach to the TV don't appear to be quite as sturdy as the wall mount part, but still strong enough. However, at least for the my Sony TV, the bracket securing bolts (prevents the brackets falling off) and the tilt locking knobs are all but inaccessible when the TV is mounted. I have relatively small hands and arms, but can not get to either without either a extremely long screwdriver and some means of tightening the tilt adjuster. Further, putting HDMI or network leads in to the TV after mounting is all but impossible. Considering this is one of the more expensive simple wall mounts available, it's design could be better.

Using the bracket for an enormous old 58” Panasonic plasma. It’s a non VESA telly, the fixings are 660 x 320mm, this bracket fits perfectly. Comes with a plethora of fixings and spacers. The wall bracket has a built in spirit level, which is really helpful! It’s well made and constructed from really heavy duty steel. Inspires absolute confidence that the television will stay on the wall!