QualGearUniversal Ceiling Mount for Projector

Was a little hesitant purchasing this to hold my £800 projector when the recommend manufactures mount is over £100 but I shouldn't have been.The build quality is excellent, lots of adjustments available to perfectly get your projector in the right position. Lots of extras included to enable you to mount onto virtually any projector. Mine only has 3 mount holes and an awkward lip bit I managed to fit the legs no problem, had to use an extension to clear the lip and a couple of extra washers but all good.You can mount on a wall or celling and it comes with a drill template. I managed to locate a beam in the celling and installed using the two large bolt headed screws. Feels really solid on the ceiling, no movement at all.There is no length extension but it holds the protector approx 6 inches from the ceiling which was fine for my needs.A real bargain.

I bought this for a BenQ W2000 and then later a Benq W1700.As a buyer of previously expensive brackets like Vogels I was hesitant to buy this as it was really low cost, but thought I would try it anyway.I have to say it was a breeze to fit to the ceiling. I used two long screws and screwed it into a ceiling joist.Then I fitted the bottom part to the projector, using the parts in the kit, which took around 10 minutes.Then the bottom part hooks over two bars in the top part, and you tighten with the tools included (A spanner and Allen key).(Instructions I thought were fine)I found it easy to adjust to whatever position I wanted, and for a projector like the BenQ W1700 and BenQ W2000 it was fine.I later tried to fit a heavier projector to the bracket and found 2 problems.1) The bottom part was extremely hard to get off the top part if you need to, I mean I really had trouble, I had trouble changing the Benq W2000 to the W1700 and almost panicked trying to get the projector down, it was not easy.2) The third projector was much heavier and eventually I gave up as the mount wasn't strong enough, and so kinda flopped.So took it down completely and bought a table instead.So my final advice is this, If your after a low cost bracket for a projector like the Benq W1700 or W2000 and its pretty much going up to stay for an extended period of time, then this is great. Its easy to fit, easy to adjust, and seems robust.If you foresee a need to change the projector any time soon, or thought it was going to be easy to take the projector down for servicing, then I would think really hard here.Its probably not one of the prettiest things I've ever seen, but as its behind where I sit, I didn't notice it :)

Very sturdy.There are lots of bits that need to be put together but do come all in the box.Its doing its job atm but does seem to move slightly every now and then even when fully tightened

Very good and sturdy, the only issue is it has so many adjustment points that the quick release (on mine anyway) doesn't work because the screws that adjust the roll get in the way. I imagine (if I could be bothered) that a tiny amount of filing on the edge of the hooks for the quick release would fix that but I never wanted to remove it anyway so it's fine. On the assembly side, this is the best self assembly product I have ever purchased. All the screws, bolts, washers etc were in separate bags and labeled, this was then referenced in the manual which is very good also.

this thing is a great little mount plenty of adjustment. The one thing id like is if the rotation joint was a little stiffer I found that if I have to change the focus on the projector the whole thing can rotate but in all honesty once its set up you should never need to touch it again. it had all the parts and plenty of spares to mount my projector.

Great value, supplied with myriad of fixings and adjusters. Very solidly made and inspires confidence that this will hold my jvc projector safely and securely. Highly recommended. Would buy again without question.

Great bracket, clear instructions and just about everything you need to install is included (apart from tools)

Actually quite a handy bit of kit, BUT despite the array of fittings it comes with be prepared to source a few screws/nuts/bolts/washers if your projector doesn't go straight on if they are not the sort of thing you have kicking around in your garage.