Canon MegaTank G3270 All-in-One Wireless Inkjet Printer. for Home Use, Print, Scan and Copy

I got this a while back, and let me tell you, this is amazing!I printed over 80 pages of pictures for my scratch book, which were over double the number of pages, some were big, some were small, to the fact that the application I was using to collect them crashed because it was too much! unfortunately, I ran out of the photo paper, which showed how well the quality is( black dog) vs the normal paper( dachshund dog), which is dull compared to the photo paper.I will say the setup is a bit confusing if you are trying to print from your phone, which I have not tried, but honestly, if you want to save money on INK, this is it! if you need quality pictures, get a photo paper and tape because the pictures will scratch. Does it have lines? yes, but not as bad as others. It did however give me a bit of an issue at some point but it got fix by restarting it and opening up the app! that is also another issue I was confused because it had 3000 and 3070 this printer is a G 3270, I looked it up and the one that works is the G3070. It came with two ink cartridges which were confusing but my husband played around the inside and found where they go.TL;DR: works great for quality pics, get quality paper, set was a bit hard but this will last does have a bit of faint lines but not noticeable with good paper!Pros:🎇Cheaper than a 60+ dollars one in the long run🎇not needing to replace the ink cartridge every 3 months🎇prints a lot🎇 Quality paper gets you very nice picsCons :🎇 a bit confusing🎇 costs more than 100🎇 did crash once

I got this as an affordable sticker maker, and it works great!For whatever reason, sticker making seems to use a LOT of ink. Cartridges were just not lasting long enough vs cost/if you run out of a single color, you had to replace the whole color cartridge.With this, you can refill a single color if needed, and I’ve already printed what would otherwise be an entire cartridge replacement, and have barely dented what’s in the tanks.Print quality is relative to the cost, if you want higher definition, it’s gonna cost you.Only issue I had was a couple photo paper jams that were due to the paper being a little curled. The print head got caught up near the end of printing- but it was easily solved by flattening the paper before putting it in the feeder.

Bought it as a replacement of my previous PIXMA I had for over ten years. Somewhat difficult to install and connect to Wi-Fi, reason for which I subtracted a star, but easy to use and dependable after that. In four month I have printed about 4,000 pages, many in colors, with almost never experiencing a misfeeding, all with the original inks. I was quite happy with the print quality, as well. Then, it stopped printing black and I could not figure out how to resolve this problem. I chatted with a customer support agent, who was very kind and helpful. He rapidly decided to replace it. Within a few days I have received a new printer and easy instructions on how to return the old one. No reason to worry about malfunctions with such considerate and efficient support from the company!

This printer is great so far! The installation was pretty easy on my laptop. Just had to follow the prompts like any other device. Wireless connection through my router has been good, no issues at the moment. I already printed in regular A4 paper, and is very fast to print in color and black and white. Also used fabric transfer paper to print some pictures to transfer on a pillow and I’m very impressed with the quality of printing for the pictures, the images transfer to the fabric with the same colors I saw them on my phone!!!. I only have a 5 star feedback for this printer. I want to try photographic paper to see how it prints pictures (haven’t tried it bc I don’t have it rn) but I’m pretty sure that if quality is great on transfer paper it will be amazing on photographic paper! I’m really happy with this purchase.

I wanted to like this, I was SO excited to order and receive it... but already out of the box the setup to connect was frustrating and we kept going around in circles. The QR code on my android, once the page loaded... did not stop loading. The setup page just kept spooling glitching and resetting so there was no way to actually connect that way. Tried it on my tablet (would be mostly printing from that) and my android phone (same conclusion). Had to do it with PC. The LCD screen and lack of instruction also frustrated my partner. FINALLY after Forever we got it connected. Which leads to HOURS to try to get a decent true black print. I tried 10 different type of papers (glossy, semi gloss, matte, presentation paper, plain and some others). Every print on glossy looks the same. Faded, Red Hue, MUD. Every print on Matte turned out a little better (at least not red hue) but Grayish hue and not black black. The Only Black I saw even close to black was on test print on plain paper. Any image that printed black was a Black and white image on plain paper (which may work on glossy except I do a lot of color).THERE IS NOT ENOUGH PRINTER SETTING OPTIONS in the Canon apps. You cannot tweak it, tweak alignment, no contrast/brightness, no color intensity no detailed options whatsoever. It is the worst printing app editor for artists. You just have to be happy with quality either Standard or High, a paper type, borderless option. No much else really. I downloaded All the Canon apps for this particular model from their site. There is basically NO printer app that will work with Canon that has detailed printing options mentioned above. I thought with Canon being about images, that somehow they would have it together enough for artists, but they seem to cater to Only general basic consumer and not the artist. The App/s are FRUSTRATING and Severely lacking.The printer itself is noisy and a busy body. Constantly nagging you and beeping as soon as you put paper in it want's to know what paper size/type... BUT they ask the same question in the printing app itself, the two don't always talk to each other. I shouldn't have to always answer and set that info twice. Then after every individual print it seems to clean its heads. Fine... if I were doing a ton of printing. . . but after every single print (literally when I print one sheet and nothing after). Then it takes around 10 min. for a Full color borderless print. Which would be fine... except it does not print true black or Black at all ... just a muddy brown/red/gray black.There is no troubleshooting that can fix the color not printing correctly because it can recognize and only do a close to black IF the image is B/W to begin with on basic paper... but if you are doing color... with a lot of black in the image... Forget it. AND... because this was brand new and no clogged anything. Straight out the box issues from setup/connect to print. I tried on all platforms (phone/tablet/PC desktop), I also tried to print from dif. apps like Photoshop, photo editor from my comp etc... just to try to bypass the Canon Lack of editor feature set. Nothing worked. I also tried dif. setting options in the Canon app (changed paper settings, changed standard to high (pretty much the only setting options they gave). And all gave the same muddy red/brown/gray/black options.This has been one of the most depressing, frustrating, angry experiences I've ever had with a printer and printer app. I CANNOT recommend for ANY artist that wants true black or control over print edit features mentioned above. You will upset if you settle for this. I either have to get a machine that isn't refillable (which is Gonna SUCK)... or suffer the fate of forking over 3xs the amount for another refillable brand that I've heard may leave paper feed perforated track marks in gloss photo paper. Neither option is good.So many other things to say about the experience... but I'm TIRED!Returning, and someone else can feel what I felt when they open the box swimming in the inks I filled in the tank and couldn't take back out.Attaching pics for reference of color prints. One of the pics has a set of 1" button prints for reference of what the black should look like and doesn't. That was printed on my old Epson. The OG image on the rest of the prints was Very bright and the black was very black. The prints that look a little less Red are on Matte, and the others are on glossy... and the black and white design was B/W to begin with on basic paper.Much Luck People, and Canon... PLEASE DO BETTER!!!