TORQUE Airbag Air Bag Suspension Kit for 2005-2023 Toyota Tacoma 2WD 4WD and Prerunner 2WD Rear Helper Bag Spring Towing 5000 lbs (Replaces Firestone Ride Rite 2407) (TR2407)

This kit works great on my 2022 Tacoma. lets me keep my truck level when towing, and adjustable with air pressure. Exactly as advertised. Installation takes a few hours, and if you follow the instructions and maybe watch a video in the install, you will be helping yourself tremendously. Well worth the cost and effort IMO.

Fantastic quality and even better customer service. The directions are a little confusing but there are youtube videos that explain the installation better. These fit my 1998 Tacoma 3.4L V6 very well and increased payload capacity and ride quality. Great value for the money! I paired these with a Camburg/Bilstein suspension and strut kit, worked like a charm. Be sure to use Teflon tape (provided in install kit) on the brass air fitting on the top of the bag, they will leak otherwise.The upper bracket on the left airbag failed (defect) but the customer service made all the difference.

Great kit missing one bracket. Didn’t want to return item so I made the bracket.. Bad packaging box was open when received and brackets were wrap with plastic wrap. All brackets should have been put in a bag.

The quality of this product is A.1. However, I would like to remind every new customer to read the installation instructions very carefully. I found out the hard way that I didn't. After I completed the installation I initiated the leak test and had to realize that one side deflated shortly after pumping it up. The installation instruction clearly states that you should not use a side cutter to cut the air-line, but I did because of laciness to get a more appropriate tool. Getting to the fittings above the air bags (after they are all installed) wasn't much fun and to disconnect the air line from the fittings was even harder. Anyway, I finally separated the fitting from the line and cut 1/2 inch with a sharp razorblade to get a nice square cut and WITHOUT SQUEEZING THE TUBE! The leak test after I had everything reinstalled was and still is without the slightest leak. Don't use a side cutter!!!

This item arrived damaged during shipping. This item is not as as easy to install as other airbags. The customer wants you to pay the shipping back when the item was damaged during shipping and parts are missing from the box.

This fit perfectly in my 18' tacoma sport. I previously swapped the leaf pack with a TRD Pro from my buddy's truck for slightly stiffer springs. I regularly haul firewood with a dual axle trailer and get pretty close to 6,000lbs. Multiple days during the summer months. I was on the fence with ordering a set of Sumo foam blocks. But wasn't in love with the idea of having a permanent stiff ride. I decided to give these a try. First off, they work great. But you will want to follow the instructions and USE LOCKTITE! I went through and did parts inventory to make sure I had all the components before I started to disable my only ride. Follow the installation instructions provided and you'll figure it out pretty easily. The 2 places I used red locktite were for the top locking nut on the airbag, and the bottom bolt for the airbag. I know that locktite on a locking nut is kind of overkill, but I REALLY don't need the bags falling out during a 16 mile trail ride hauling a trailer 2 hours from the nearest town. I also bought a .8 gallon air compressor with tank from a train horn kit. Minus the train horn nonsense for around $80.00. And a air suspension paddle system with gauges and independent levers of each bag. Kind of like what is in an old semi for the seat, but with a gauge. I stuffed that into the right side door in the bed of the truck. Mounted the air compressor underneath on the right side. Above the tail pipe and to the right of the spare tire. Ran a 14 gauge wire in a loom all the way to the battery. Put a 30A in line fuse in it. And threw a 12v flip switch on the other end. Also stuffed in the door in the bed. Now all I have to do is flip a switch, fill the tank and then set my bags to whatever I need them to be. All in it ran me about $400.00. It's not as fancy as some of the bluetooth controlled air ride kits that can run you $5K plus install. But this does what I need it to. And I installed all of it. So if I do have a failure or a leak I know exactly what I'm looking at. Bag kit took about 1.5-2.0 hours. Air setup took an additional 3. Mainly because I an OCD and wanted to have each line it's own color for easy troubleshooting later. And was meticulous about how I ran each hose.If you aren't mechanicly inclined then have an offroad shop, or a custom shop do the install and save yourself some frustration. But if you are on the fence about this kit, I'd buy it. While it doesn't increase towing capacity, it does significantly improve the truck level while fully loaded. And makes it much safer to steer at highway speeds while hauling heavy stuff.

Looks like a well thought out kit. I'll install it this weekend and see how it goes.

Instructions aren’t very specific, and they leaked after a week of use. Easy to ruin them if you expect them to maintain pressure without checking. As airbags are expected to, they ruin your ride quality. They worked for what I needed them for, but I regret buying them. Poor long term choice.