YBEKI Narrow-Wide Chainring 30T-38T - CNC 7075-T6 Aluminum MTB Chainwheel for SRAM GXP/XX1/X01 (3mm/6mm Offset) | Eagle Tooth Design | Ultra-Light 60-80g | Hard Anodized Black

My stock steel chainring was a 30 tooth, this 36 tooth aluminum ring fit my 12 speed Sram drive train perfectly and the function is flawless. Just make sure the power-link is installed in the right direction.

So far impressed with this chainring. Seems like good quality.

I purchased the 6mm offset which was PERFECT, aligned the chainring with the center of my rear cassette for minimal crosschain, beautiful machine work as well!

I was surprised at how good the quality is. Everything looks extremely similar to SRAM but a third the price. Fit perfectly and felt very smooth while pedaling.

Well-made 38T chainring it works well with SRAM Eagle 12-speed crankset on my bike.Edited 12/20/2024. The chainring works well except the last 3 cogs and the first 3 cogs on the 12-speed SRAM cassette, it would make some clicking noise randomly even after I replaced the chain with a GX 12-speed chain (the other chain was a NX 12-speed.) I guess the chain line is a little off to one side (or the other.) I took a closer look at the teeth, and they are not quite the same tooth profile as the SRAM X-Sync 2's teeth. I decided to use my rotary tool to grind off a little on the leading edge of every tooth, just about 0.7mm, to math with the SRAM profile. It works wonderful now.

Replaced a 2 year old SRAM eagle gx 32 tooth ring. Personal preference of course but I always felt my gear was either too high or too low. The 30t is just enough different than the 32t that I'm much happier with the lower gears. I will eventually replace original 10-52t cassette with 10-50t version. Can't speak to longevity but it's quieter than the worn OEM ring.

Worked well. Chain fed well on the narrow-wide teeth.

Fits well for the gravel build.