Upgrade Dual Backup Camera Monitor Kit 7" HD 1080P Monitor IP69 Waterproof Rearview Reversing Rear View Camera for Truck Trailer Semi-Trailer Box Truck RV Pickup Truck Easy Installation (TZ102)

I recently purchased a backup camera monitor for my tractor, and I couldn’t be happier with it—truly a 5-star product! Installation was a breeze; the clear instructions and included mounting hardware had it set up in under 30 minutes. The operation is incredibly user-friendly, with a crisp, high-resolution display that makes reversing in tight spots effortless, day or night, thanks to its excellent low-light performance. The intuitive controls let me adjust settings like brightness and angle with ease. Product support was outstanding—when I had a minor question, the customer service team responded promptly and was super helpful. This backup camera monitor is reliable, well-designed. Highly recommend

It is a very high quality camera kit for the cost! The cameras and screen are very easy to install and work great, very high quality picture. I used a magnet mount on the camera on the truck which makes it very useful for many things at different locations and angles. I am installing the second camera on the back off our fifth wheel trailer with an extension cable. DVKNM has great customer service and I would recommend this product and purchase from them again!

Picked this up to give us rear-view mirror functionality in a cargo van without back windows. Installation was fairly simple, however I did have to cut the camera wire to route it through the existing cable path into the back door. Reached out to tech support first and they confirmed that it could be done, and said that even if I do end up breaking it, they'd send another cable at no cost.The splice itself isn't the easiest: there is an aluminum shield around the outside that is tough to keep intact when stripping the rubber insulation, and the 4 wires inside are very small. Still, there was plenty of slack (they give you like 50' of cable), so I was able to expose all 5 and twist & tape like ends together. I do wish there was a factory-supplied splice option, as many customers will need to do so for cable routing or just to reduce the cable length. While the wires are too small for wire nuts, Wago lever nuts would work well as would a terminal block. Obviously solder + shrink wrap is the best solution.Once the cable was ran, mounting the camera was straightforward. I took off the overhead storage compartment to install the screen upside-down where a mirror would be, and the screen supports rotation and remembers it's setting so once dialed in, it works perfectly.To power it I actually tapped off an existing 120v outlet using the vehicles built-in inverter (Nissan NV2500 cargo) and used a transformer with 12v output rated higher than the camera and screen (I believe I used 1a). This allowed me to turn the camera and screen off and on with a factory toggle switch in the dash. If I ever remove the dash, I'd be inclined to replace that with a dedicated toggle switch and fused DC feed.The image quality is good: standard def but not too grainy. I did notice that bright light sources such as the sun will turn black to prevent it from washing out the rest of the picture, and that it compensates for low-light conditions. I have not yet driven it at night so don't know how well the IR emitters work.Overall the camera has done it's job and tech support was quick to assist. The price was certainly right, so if I needed a similar setup I'd certainly buy it again.

Bought to use on my jeep for off-road spotting cameras. Works great. Solid build, all components needed included, instructions, though limited, are sufficient and is simple to adjust where needed. Gave 4 stars only due to the fact that the image flip/reverse function is ties to both camera inputs and cannot be set independently, so be aware that if you have one camera facing front and one to the rear, one image will be reversed when you flip between the inputs. It's a simple adjustment by button at the bottom of the screen, so not a dealbreaker, but a bit inconvenient. Otherwise, image is decent enough and the night vision function works better than expected, especially near-range.

The media could not be loaded. I hesitated for awhile, but finally decided to purchase the TZ101 backup camera kit. When I received it, I think it worth every penny.The package include everything needed. The camera is all metal, very heavy and looks well made. The monitor also look high quality. And there is also a 67 inch cable, it is long enough for most cars.Installation is quite simple, the manual is very useful. It included a diagram shows clearly what to do.Before I install it in the car, I first tested the components in my garage and make a simple video. If you only have one camera, then hook the red(positive) line to the backup light power, and secure the black(negative) line with screw. This will power up the monitor when you shift into backup gear, thus only see the image when you backing up.If you want to install second camera, then connect the red(positive) line to car’s main power line(so when the car is turned on, it will provide power to it), then secure the black(negative) line with screw again. Now connect the blue(backup trigger) line to the backup light power. This will allow camera V2 to display on the monitor during normal driving condition, and switch to camera V1 when the car is backing up.The picture quality of the camera and monitor is very clear, it is much better than my old monitor. It is great upgrade. I would recommended it to any one who needs one.

This wired back up camera works like a charm. I was pleasantly surprised by the quality of the camera and screen. No lag, no interference that I previously experienced with wireless systems. It is easy to install. Menu gives many valuable view options. It comes with a cable too long for my need and Carey, the customer service rep promptly sent me a shorter one, great customer service. (suggest they should let us select our cable length when odering).

Good quality easy installation