🚀 Illuminate Your Journey with Style!
The 12V Speed Adjustable 2 Pin Direct Replacement LED Electronic Flasher Relay is designed for seamless integration into most vehicles, providing a reliable solution for LED turn signal and hazard light issues. With a wide operating voltage range and adjustable speed settings, this relay ensures optimal performance in various conditions.
T**Y
Kawasaki ninja 300
Used for Kawasaki ninja 300 motorcycle.installed after sequential rear turn signals caused my front stock signals to stop working. Plugged right in and mounted with the same rubber piece as the original relay. Worked perfectly and now all my signals work. Was not expensive, worked with the led and stock signals. Turn signals do not click or make noise though.
L**.
Perfect for LED
I used this flasher for a 2010 Crown Victoria. I had struggled with hyper flashing when I changed to LED turn signals and canbus LEDS did not work. Since non of the flasher st autozone worked as well I had to go with this one.I did not try the flasher speed feature as the stock speed was fine.If your going to use for the Crown Victoria, I would suggest using the wiring harness for the turn signal stock. You will need to remove the plastic pieces on the steering wheel. The connector should be directly behind the 4 way flasher buttons. Your going to need the solid light blue and the red with white strip wires. The Red with white stripe wire is theb12v constant and the blue will be the load. This requires more plastic to remove to get too in comparison to the Light module. However you have more access to the wiring this way as well and it's more friendly as you don't have to be at awkward angles for the lCM in the footwell
M**
No sound blinker unit.
Caution. This "blinker" does NOT make blinking sounds in my 1956 Lincoln. The LED function was fantastic, adjustable fast and slow. If you want sound from your turn signals this is NOT your item. Amazon sent a replacement thinking the first was defective, but the second one was the same. I'm going to keep it because the functionality with LED lights are just fine.
S**M
Worked fine
Worked fine. Didn't fix my problem, but that was more than a relay could do.
N**E
Works like it should
Used for my integrated taillight for my 2024 gsxr1000. Worked well, plugged right in. Haven't really adjusted the flash timing, just put it in the middle and worked.
M**.
Did not work
Installed very easily but did not work. Indicator light came on but did not flash, tried changing speed setting no change. I installed this on a classic car.
T**Y
works with LEDs so you don't need to use load resistors.
works with LEDs so you don't need to use load resistors. Adjustable.
M**K
works as advertised.
turn the internal screw clockwise to slow the blinker speed...works fine so far.
Trustpilot
2 days ago
1 day ago
