MikroTikmAP lite 100Mbit/s Power over Ethernet (PoE) White - WLAN access points (5-60, -30-70 °C, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at, White, Wall)

This is a brilliant device- the size of a small stack of After Eights. It can be powered from PoE, and can run as a bridge, router (I think it can even drive a PPPoE modem) and do some basic filtering. Obviously, you won't get giant high-gain antennas, and its' 2.4GHz only, but you get the typically ludicrous RouterOS feature set in a tiny package. Perfect for throwing in your toolkit, or bag when travelling. It's also great if you want to leave an AP in a cabinet that field engineers can power up to connect their laptop into a wired network.Oh, and the fact that it's magnetic? That's brilliant. Plug it into a PoE-ed ethernet cable, slap it somewhere and be happy. It has its limitations (it's no industrial grade UBNT AP), but at the size and price, it's a gem.

Works well, using as a backup for my home internet so if it fails I just enable my phone hotspot and the house then uses that. Has been needed a few times and has worked every time.

I use this device to set up a secondary back up WAN for the UniFi UDM PRO.I am able to connect this device to my mobile phone hotspot and use it as a back up for my home Wi-Fi. We’ve had a few outages recently, and this little device has insured that we have connectivity at flick of a button!

I reprogrammed it to do the opposite and be a back up for my broadband by using my phone. Works flawlessly.

Small, powerful but I needed this to work via POE and Google / other comments will tell you this implementation ‘may’ work on your POE, for me it didn’t work out - even with a x-over adapterYes they supply a bulky UK power adapter but space was limited for me.I’ve worked around the power issue (using a small micro usb supply)

Simple to setup. Reset button is a bit hard to press. Amount of features in this little AP is amazing. Use it on my Homelab to setup my IoT WiFi network

It's super-small, works (mostly) well, and has a very rich feature set which offers massive scope for complex configuration. If you're a Cisco bod you'll pick up the console pretty quickly. However, there's a big "but"...I bought it mainly for the PoE "support". It seems fine with my old ASA5505, also fine with an injector, but does it work with any recent mid/high-end Cisco campus switches? Does it chuff.There are staff posts on Mikrotik's forum referencing PoE design flaws, and suggesting use of a crossover cable to reverse the polarity. I'll give that a try, but not holding out much hope at this point.

Small but powerful device, I use it as an internet backup(using cell phone data) for local network in the office

This thing is tiny, and can be PoE powered, making it incredibly flexible. I have a remote gate that I wanted to install the highest resolution Ring doorbell, which is unfortunately not the one that has Ethernet support. So, what to do. My wifi signal out to that location is weak, and the doorbell would not reliably allow for two way communication with people at the gate. I had ethernet out there, then found this little guy, and it made for the perfect solution. I put it in a little weatherproof box, sealed the ethernet wire into the box, and powered it with PoE. I stuffed the whole thing in the wall behind the doorbell and it's set to act as a wifi to ethernet bridge with a custom SSID just for my doorbell to use. Now the doorbell has a strong wifi signal six inches away and works flawlessly. The mikrotik has an accessible IP on the internal side of the bridge so I can still manage and update it as needed.

Unglaublich was das kleine Teil alles kann!!! Ich zähle jetzt nicht das ganze Datenblatt auf aber von normalen FW Funktionen über VLAN zu BGP und und und kann das Ding super viel! Klare Empfehlung! Versorgt werden kann es zusätzlich auch über PoE, extrem praktisch wenn man beim Kunden ist und weiter weg vom SW sitzt ( sofern er kein NAC hat. Aber auch das kann gelöst werden! xD )

Muy fácil de configurar y muy buena cobertura.

Producto estupendo para llevarlo en el bolsillo, la maleta o en un viaje y utilizarlo cuando lo necesites como un AP personal, además es un Mikrotik en toda regla!.Y uno se pregunta, y además ¿para que me sirve un punto de acceso de tan sólo 100 Mbit/s y Wifi 2G? en mi caso es para aislar los inseguros IOTs que sólo se conectan las no tan seguras redes 2G, por no andar creando vlans, tengo a todos estos aparatitos conectados y aislados (+ isolation) en el mAP, el consumo es ínfimo, es POE y el que sólo sea 100 Mbit/s es lo máximo que saca el que en el hipotético caso se cuele... Al ser un routerOs tiene firewall y otras cosas mas...También se me ocurre para una red de invitados aislada de mi redEn resumen, sin complicarte, aísla lo inseguro en el mAP!