Deliver to Finland

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

GRR-Ripper 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

GRR-Ripper 3D Pushblock for Table Saws, Router Tables, Band Saws, and Jointers by MICROJIG

Q: What is the difference between the gr 100 and the gr 200by model and is it worth the price difference?

It really depends on what you will use it for. I bought the 100 and it worked fine. I then started to do some thin ripping and purchased the 1/8" leg. That's been helpful although I did cut into part of the leg. It was my fault for not keeping adequate pressure on the gripper against the fence. I then bought the piece that turned the 100 into the 200. All in all I paid too much because I was trying to save a couple of bucks. I did notice today that Amazon has the 200 with the 1/8" leg on Prime for $79. If i had to do it again, I'd go with that. Hope this helps.

Q: I looked at the videos. Am I correct in assuming that you have to remove the blade guard in order to use this.??

No thanks, I'll keep my blade guard. The reply above is more Gripper propaganda. Blade guards are not useless impediments designed by lawyers. My blade guard has stopped many accidents and is clear so I can still see the kerf.

Q: What is the absolute minimum thickness the jig will cut? I need to rip 1/4" strips

One of the two legs of the GRR-RIPPER is just under 1/4” so out of the box it is fully capable of cutting 1/4” thick strips. We also sell an accessory 1/8” leg that allows for cutting strips down to 1/8” thick. Just remember that in either case, when cutting thin strips you want to use a Zero Clearance Insert to insure that your thin strip will not fall into the opening for the blade or the riving knife opening.

Q: How hard is it to level the jig when adjusting the side support?

Not hard. Just push the Gripper up against the fence and down on your piece. Thenloosen thumb screws and let support drop down to table.

4.7/5

Product ID: 96145832

Secure Transaction

Details

Brand
MICROJIG
Colour
YELLOW
Blade Material
Aluminum
Surface Recommendation
Aluminum
Power Source
Corded
Special Feature
Hand Kickback

📏precise 1/4" thin rips

🛠️3-directional force control

🛡️virtually eliminates kickback

Frequently Bought Together

MICROJIG GRR-RIPPER GR-100 3D Table Saw Pushblock, Yellow

BOW Products FeatherPRO FP1 - Featherboard for Table Saws, Router Tables and Band Saws - EVA Feathers that Reduce Kickback - Woodworking Tools and Safety Accessories

BOW Products PushPRO PP1 - Push Stick for Table Saws - EVA Tipped Push Block That Reduces Vibrations and Improves Material Grip - Woodworking Tools and Safety Accessories

Description

🛡️ Cut with confidence, control, and zero compromise!

MASTER YOUR CRAFT - Includes 2-hour advanced techniques DVD unlocking 30+ unique uses across multiple saws.
KICKBACK NOT HERE - Moving-blade-guard design virtually eliminates dangerous kickback for safer cuts.
UNRIVALED 3 D CONTROL - Three legs deliver downward, inward, and forward pressure for total workpiece mastery.
VERSATILITY MEETS COMFORT - Adjustable center leg and handle angle adapt to any material and user preference.
SURGICAL PRECISION EVERY TIME - Rip with exact 1/4" accuracy without fence adjustments—perfect for small stock.

The MICROJIG GRR-Ripper 3D Pushblock revolutionizes woodworking safety and precision by applying three-directional force to stabilize and control your workpiece. Designed for table saws, router tables, band saws, and jointers, it virtually eliminates kickback and enables razor-thin 1/4" rips. Fully adjustable and backed by expert tutorials, this USA-made tool is a must-have for professionals demanding safer, smarter, and more accurate cuts.

Specifications

Brand	MICROJIG
Colour	YELLOW
Blade Material	Aluminum
Surface Recommendation	Aluminum, Plastic
Power Source	Corded
Special Feature	Moving-Blade-Guard Hand Protection, Kickback Elimination, 3D Control
Item Weight	454 g
Speed	4500 RPM
Blade Length	10.2 Centimetres
Cutting Angle	360 Degrees
Blade Shape	Round
Global Trade Identification Number	00815267010002
Handle Material	Plastic
UPC	733353322429 615867248290 784497001763 815267010828 753956609321 810948013297 815267010002
Manufacturer	MICROJIG
Item model number	GRR-RIPPER 100
Product Dimensions	17.78 x 11.43 x 11.43 cm; 453.59 g
ASIN	B001I9UNWC

Have a Question? See What Others Asked

What is the difference between the gr 100 and the gr 200by model and is it worth the price difference?

I looked at the videos. Am I correct in assuming that you have to remove the blade guard in order to use this.??

What is the absolute minimum thickness the jig will cut? I need to rip 1/4" strips

How hard is it to level the jig when adjusting the side support?

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

Fatima A.

Best international shipping I've ever tried. Worth every penny!

3 days ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving millions of shoppers across more than 100 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ali H.

Fast shipping and excellent packaging. The Leatherman tool feels very premium and sturdy.

1 day ago

Rajesh P.

Customer service was outstanding when I had questions about the product.

2 days ago

View all Trustpilot reviews