Crystal Series 680X RGB High Airflow Tempered Glass ATX Smart Case, Black

I’ve had this case for about a week now and I am very happy with it! I try to future proof my PC about once a year if I can, but this year I decided to take it a bit future and rebuild the majority of it. (Still have more on the way). My buddy loved this case for his new build and it just gives off a nice customizable and clean look that I was looking for. The space in the back for the power supply is a god send. I just wired in PSU Cable Extension Sleeves and I still have plenty of room back there for more drives that I plan to throw in. I’ve seen some comments and opinions about the case, saying that for the price, it doesn’t make a good fit for a moderate build, etc. However, I argue that it all depends on what you want. I’m able to throw pops and theme it much easier and add more fans in, if I want to. And easily upgrade to an AIO if that’s what I want to do later on... So, if you want a well built case, with tough glass, with tons of space for upgrades, cable management, and or just a case to gives off a clean look and to give it a personal feel, then I recommend going with this one. Worth the money, for sure! (Just make sure you have the desk space haha)

Great build quality, super roomy, and looks amazing. More than enough space to handle just about any hardware you can think of (that's a 3080 so not much larger you can go for a GPU) The secondary chamber that you put your PSU (and basically everything else) into is amazing for helping make cable management super easy. All in all, great case that makes it very easy to set up a fantastic looking system (and the airflow is top notch). Only stinker is that iCue is wonky as h*ck but it's currently working smoothly for me now so there's that.

I watched reviews on this case and on the Lian-li, but ultimately went with this case. I was going for a full Corsair build, this came with three less fans (LL120) that I would need to purchase. I ended up purchasing a few more LL140's to replace the one in the rear, which unfortunately was not an RGB fan, purchased a power commander, some LED's and a Corsair H115-0 Platinum for the CPU cooler. Everything fit perfectly, case has great build quality, and Corsair's website provides clear layouts for fan sizes and radiator sizes the case would fit. The rear side of the case has plenty of space for cable management, 2 RGB pro, Power Commander, and LED controllers. Motherboard was a Z390-A and fit perfectly. The only thing I did not do was front mount the GPU because it would be resting against the front screen and that would only give it about half an inch of breathing space with the front glass panel. All temps are nice and cool and everything looks great for fans of RGB. I would definitely recommend this case.

I purchased this case because of the styling and the big glass windows to show off the components. One of the coolest features is that the big glass door on the side opens on a hinge and stays closed using a magnet. I love that I was able to hide the cables and the power supply in the second compartment. Plenty of room as you can see from the pics of my water cooled system. The power button and the usb's are on the top of the case and make it easy to get to. The front and top fans mount on a removable bracket that makes install a breeze. I am very impressed with the overall quality of the case and as you can see from the pics it looks amazing. If you want a high quality case with great ventilation to showcase your pc build then this is the winner.

This is a big case, but honestly needs to be a couple inches wider. If you use a 360mm front radiator like me, you have 12ins of GPU clearance, meaning no high end GPU with fit as they're all over 12in, unless you get a water cooled one like my Asus ROG strix LC 3080ti. (Edit: amd 7900xtx are only 11.3in so high end AMD cards will fit too) Then you'll run into your next problem. Fitting a radiator on top with a front radiator there. Can't have the front radiator tubes on top bc the top radiator, and with the GPU traditionally mounted, you'll see how tight of a fit it was for my CPU cooler tubes to fit behind the GPU. My CPU was also running hotter than usual with it installed like this. Not too hot, but a little hotter. You can't install the top radiator with all 8 screws either, the front radiator is in the way, so I shifted it over on the top mounting plate and was able to get 6 screws in the top radiator, not worried with that many. I got an Asiahorse brand pcie 4.0 extension cable and vertical mounted this GPU and my CPU temps went back to normal. This GPU is beautiful and deserves to be vertical mounted though haha. I was just worried about performance loss, but this cable handles my 3080ti at 2100mhz no problem. I game on a 4k 144hz gigabyte m32uc monitor. I'm sure there's a little performance loss using an extension, but nothing I'm going to notice. Now the back of the case. It's huge but I have it packed with cables bc I use fancy PSU extensions with combs. I read about stuff getting hot back there if you had a lot of drives. I removed the HDD cage and installed the SSD cage lower in its place where some screw holes and mesh lined up, plus a zip tie on the top of it for a little extra support. I installed a 120mm intake fan that came in the case on the back panel, 2 screws fit in the metal mesh, and then 2 zip ties where it didn't line up. The fine mesh fliter that goes over the white metal mesh over this makes it unnoticeable. I then installed a steel mesh screen on the other side on this intake fan so no wires could poke in there when I close the panel (this isn't pictured). I then installed a 90mm be quiet fan above the SSD cage for some exhaust in the back chamber. I can remove my back panel and place it on the shelf below my PC without having to disconnect the back panel intake fan, so it is of no inconvenience. I also put my case on 4 steel foot risers to give better bottom air intake for my 2 140mm fans down there. Beautiful case. Overall I'd recommend, but just be aware of your dimensions and what you want to do in this case.

Big beautiful case. Easily fit everything and looks awesome. Needs a lot of space though. Great quality.

スリーブケーブルをつけたかったので裏配線スペースが広いケースを探してこれにたどり着きました。 製品自体はミドルケースとなっていますが他のに比べて大きめです。(横に) ガラスパネルは扉のように開閉できます。 HDD,SSD共に4つ以上取り付けできるので数には困りません。 値段はかなり高めですがその分ブランド感と高級感、使いやすさ、見た目の良さを手に入れられると思います。 グラフィックボードの縦置きが可能ですが、個人的に縦置きのときは温度が少し高めになるような気がします。恐らくガラスパネルとの距離が近いからだと思われます

Mooie ruime kast vanwege de 2de ruimte aan de rechter zijkant. genoeg plaats om HDD's en SSD's, voeding en overige kabels te plaatsen. Enige wat pijnlijk is aan deze kast is dat je voor zo veel geld een niet rgb fan achter krijgt terwijl de 3 aan de voorkant dat wel zijn. Beetje jammer.

Um euch direkt vorweg zunehmen warum Ihr das Gehäuse eventuell nicht so klasse findet, ist die Wärmeentwicklung, welche leicht entstehen kann. Das Gehäuse sieht optisch einfach klasse aus! Es gibt für mich kein schöneres Computer-Gehäuse auf den Markt. Es ist so schön sortiert, eine extra Wand lässt Kabel schön verschwinden und verdeckt das Netzteil, eine tolle Lösung. Das Gehäuse wird direkt mit drei sehr schönen und leisen RGB-Lüftern in der Front geliefert, diese fangen direkt nach Einschalten an zu leuchten und blenden einen weg, einfach klasse! Man kann diesen ganz einfach über die Software iCue steuern. Oben befindet sich desweiteren eine Glas-Platte über die man den Inhalt des Computers auch von oben betrachten kann. Die Verarbeitung ist einfach klasse und hier wurde an keiner Stelle gespart. An vielen Öffnungen, wo es nicht stört sind extra Staubfilter, diese lassen sich leicht entfernen und reinigen. Die Knöpfe des Gehäuses sind auch sehr schön verarbeitet. Desweiteren bietet das Gehäuse die neusten Standards wie USB 3.0 und USB Typ C, welcher die Übertragungsgeschwindigkeit deutlich beschleunigt. Das Mainboard ließ sich sehr leicht montieren und die Kabel sehr gut wegführen. Die vorinstallierte Technik (Lüfter usw.) sind alle sehr schön verkabelt und ordentlich verarbeitet. Für eine große Grafikkarte bspw. eine RTX 2080 oder 2080ti ist deutlich platz, man könnte hier sogar eine zweite verbauen. Da das Gehäuse sehr groß ist und viele Lüftungsschächte hat ist das Problem mit der Wärmeentwicklung nur noch gering vorhanden und für mich kaum bemerkbar. Ich habe hier einfach auf einen etwas teureren effizienteren Kühler gesetzt und schon war das ganze gar kein Problem mehr. Ich bin echt sehr zufrieden und von den Corsair Produkten allgemein eigentlich schlichtweg begeistert. Momentan einfach das schönste und beste verarbeitete Gehäuse, dass ich finden konnte. Das ganze Zubehör wie Kabelbinder und Schrauben sind auch sehr gut verarbeitet und hier wurde ordentlich was beigelegt. Hier findet jeder das richtige. Zwei Fotos zeigen das ganze. Großes Kompliment an Corsair!

1. truqui al final del comentario, 2. La compraba de nuevo sin dudar: Buscaba una caja GRANDE donde poder mover mis manazas y no estar una tarde entera peleándome para poner/quitar un componente o simplemente limpiarla etc. Ya estaba cansado de torres "grandes" donde no cabe nada y es imposible cierto orden. PROS: - GRANDE y cómoda por fin... en el compartimento derecho todo lo más lioso y aun así queda bastante bien ordenado por ser espacioso, en el izquierdo acristalado puro espacio y orden y fácil de trastear. - Calidad, metal y cristal dan sensación de calidad y rigidez a partes iguales además la puerta abatible con imanes y con la posibilidad de quitarla del todo es perfecta. - Bahías para discos con soportes que se autoencajan tanto en el disco como en la bahía. Es comodísimo en instalar discos y tiene más de las que vas a usar... - La compré de oferta así que se puede decir que el kit que trae de ventiladores y controlador me salió regalado. CONTRAS: - Pierdes la capacidad de instalar cualquier lector etc en la torre, todo externo (pero la hace más bonita...) - Un iman para las huellas... como veréis en un vídeo que no las he quitado para que se vea. - Los FILTROS aunque estan muy bien en diseño y comodidad de poner y quitar al estar imantados y ser rejillas flexibles, NO PARAN NADA, son agujeros demasiado gruesos y casi se puede meter un cartucho de tinta de bolígrafo en la rejilla. He tenido que poner una tela fina por dentro de los que hacen de zonas de entrada para hacer de "filtro" de verdad. Sigue produciéndose flujo de aire y la temperatura no me sube por ello así que seguirá más limpia de esta forma. Hasta en torres mucho más baratas y cutres se molestan en poner una especie de filtro "esponja" que para mucho más el polvo que lo que trae esta que es meramente decorativo. Por lo que vale podría traer algo parecido... Quitando lo de los filtros y que la compré de oferta, después de montarme varias torres y sus actualizaciones de componentes pertinentes, esta es con diferencia la más bonita y COMODA que he tenido y repetiría sin duda su compra. TRUQUI: como me lo ha preguntado gente que ha visto mi torre, los filtros no son más que recambios de la mopa del mercadona el cual con un pequeño ajuste con tijera ya queda perfecto encajando dentro del marco imantado del filtro.

Where to start, the case looks amazing all around, except for the top glass not a fan of that but it works fine. Lots of room for fan installs. front RGB fans are beautiful. The case is very easy to build in and make the pc build look fantastic. tons of HD/SSD space in back routing and cable management is simple. The door is a huge plus, with easy remove hinge making it easy to build in it.. All in the case is easy to build in and great to look at. I got mine from warehouse sale and had a slight issue with front and rear fan, but amazon quickly fixed the issue I had.. This thing is a definite buy $329 seems regular price, decent at that but if u can snag it for $289 I see it on sale sometimes its a major get it.