FeizLink35ft Fiber Optic HDMI 2.0 Cable, 4K 60Hz HDR10 HDCP2.3 3D Slim Flexible for HDTV, TV Box, Gaming Box, 4K Projector

I was shown this cable by someone I work with that had just completed a home theater install. I needed a 65' cable for my home theater to go from my AV receiver to my 4k projector. I was a bit hesitant at first to order this because of the price (it's a lot cheaper than others on the market). I ordered it based on my co-workers recommendation.It arrived as advertised. My co-worker had already warned me about the fact that the cable had a source and a display end so I was not tripped up like some of the other reviewers. I was concerned if the cable would hold up to me pulling it through a few walls via a cable fishing pole. It held up very well but I made sure to tape the cable to the hole and then use secondary tape to secure the end to the pole. This allowed the pressure to be applied to the cable and not the end.I have had this cable installed for a month now and it has performed flawlessly. Zero issues.I have been so happy with this cable I actually ordered a second one to drive a 4k TV in my bar off the zone 2 video on my AV receiver.

Not sure if the other reviews are paid for or what, but I cannot get 4k@60 with HDR as the description states should be possible. I am able to enable everything and it will even work for about 2 minutes, then the screen will start flashing and eventually disconnect. For reference, I am using this with an RTX3070 in my PC and a LG C7 oled tv. To narrow down my issue to this cable, I moved the PC next to the TV and plugged in a standard 2.1 cable and I was able to get 4k@60 with full HDR no problem. This cable is just junk. I thought this would be an inexpensive solution to my distance problem but it seems I was wrong.

Quality and lightness of cable is superb. It never worked when connected directly to my Samsung 55 inch plasma screen. However, it works fine when connected thru my hdmi 6 device switch it worked fine. I was careful to observe polarity, as cable only works one way. I had another cable from another vendor also not work, but never tried it on my hdmi switch box. So the takeaway I would say is that compatibility depends on your equipment. May or may not work. When it works i5 works right away and looks great. Keeping it. Oh, the price is pretty high, competition was 1/3 the price but like I said never tested it with hdmi switch.

This HDMI cable dropped a signal that a regular 40ft HDMI cable carried from an a/v receiver. I’ll explain my setup in case anyone has advice.Blu ray player and fire tv to a Yamaha av receiver with 4 hdmi in and 1 hdmi out. The hdmi our has a longish run (35 ft) to a projector.Blu ray and fire tv direct to projector work just fine with this cord and regular hdmi cable.Fire tv through receiver to projector for will NOT work with either this cable or regular hdmi.Blu ray through receiver to projector WORKS with regular hdmi cable but not with this cable.Blue ray and fire tv through receiver through a short 10ft cable to alternate monitor both work.So clearly the combination of the long run and some type of signal drop through the receiver is dropping the signal but I can say with certainty that this cable is not performing as well as a normal hdmi cable in my setup.I’m tempted to buy a new receiver or try wireless hdmi....frustrating...

Works like a charm with my Matrix splitter to my projector. Giving me enhanced picture pixel crystal clear video resolution quality {SEE PHOTO}. Also dolby atmos surround sound is upscale to the next-level {IMMERSIVE SOUNDSCAPE} ..!

I tried many cables not knowing the difference until I learned that if you want 4K at lengths greater than 10 ft you need active HDMI cable and for lossless picture quality best to buy fiber cable, and this product gave me both!!I am happy that I bought this cable, they are thin, half the size of the brand that didn't work and source end and TV ends are marked clearly and they are flexible to go around tight corners.

finally, a product that fixed my hdmi dropout issues. very pleased worth every penny. expensive... not really...why spend pennys on other products , but you spend $5K on speakers, $3K on projector and you only want to spend $18 on a cable..... get what you pay for ....

Got this hdmi optical fiber for my EPSON Home Cinema 4010 30ft from my media rack. Haven't had any problems with video or audio. 4k hdr content works great. BR Player to receiver with regular hdmi cable and then from the receiver to the proyector with this fiber cable. Haven't tried 3D format but I think it would play that too with no problem at all