Holikme 30 Feet Dryer Vent Cleaner Kit, Flexible Lint Brush with Drill Attachment, Fireplace Chimney Brushes Extends Up to 30 Feet for Easy Cleaning, Use with or Without a Power Drill

Easy to use. Does a good job. The vent hose for our dryer is made of an aluminum foil product and the cleaning “wheel” didn’t tear the hose. You would be surprised by the amount of lint that gets cleaned out of your dryer and vent hose. Well worth the price. My wife was willing to pay $175 to have it cleaned. I ordered the kit and am extremely satisfied with the results.

Our dryer's performance has been gradually declining over the past 7-8 years. I have seen numerous advertisements about dryer duct cleaning and how much lint you might expect to have removed, etc So I decided to give this a try myself. Our dryer vent ducting isn't a straight shot out of the house, and I was curious how this would work. It ended up working very well; luckily for us, our vent did not have much lint in it. However, we did pull out about a handful of lint running this through the vent. I ended up using most of the extension pieces to get through the full length of my ductwork, and chucked it into my Milwaukee M18 drill. I slowly rotated this as I pushed it through and pulled it back out. There were a few times when the shaft seemed to get stuck and would not back out any further. I ended up pushing back in and then pulling back out several times to "free" the shaft up and allow for the removal to proceed. Take your time, and be patient when using this tool. Highly recommend! WARNING: Make sure you use only clockwise rotation, or you risk sections/segments detaching from your ductwork!

This product was very effective. I was able to remove lots of fluff out of a 25ft vent. Caution: Do not run your drill in reverse for too long, the pieces will disassemble which does make it very difficult to retrieve. I forgot that I had reversed the drill when adding more pieces. Always drill clockwise

I didn’t know if this would work to remove lint that was stuck in our 16 ft. dryer vent but it worked great! We were pleasantly surprised and saved a great amount of money using this cleaner kit vs having to get a professional cleaner! It is great that you can adjust the length for your particular needs! Great product!!

Works very well. I had not cleaned my vent in a few years and I noticed my dryer was not working as well as it should. Purchased this and spent a bit of time cleaning my vent. My dryer is upstairs and vents straight to the roof so I could only work on it from inside. I took the advice of others and taped the joins as a precaution, tho I don't think it was necessary. Just remember not to reverse your drill as you pull it back out. The pieces do tighten themselves as you run it, so I did need pliers to undo them, but that was not hard. The picture shows the pile of lint after just using three sections up the pipe. All told, I used 9 pieces and got quite a bit more, mostly from the bottom and the very top. I did not use it with a shop vac, as I didn't have an adaptor. I did see on youtube how to make one so I will do that next time.

Acquired this for the vent in my primary residence that was previously owned by three other families. What did I learn while using this in a tight working space (condenser on the left and right, hedge bush in front of it). 1. Attach one extension at a a time, route it forward, withdraw it and allow debris to be removed. Then add the next as needed. 2. Have two pairs of pliers - when you have to add another extension, the end component that goes into the drill is impossible to remove by hand. I think this is by design 3. When finished, each extension will also require two pairs of pliers to loosen the connection between the two parts. 4. Ensure your vent cover is also manually cleaned (by hand/brushes, air compressor) 5. Ensure you have silicone on hand to provide an outer seal and to keep the critters out! QUALITY: Solid FIT: this fit both the vent and the drill FUNCTION: I used the larger/wider brush and the brush, rods/extensions and the 1/4 inch drill adapter functioned well. The extensions have plenty of bend/give to them. VALUE: clogged vents are a known fire hazard. Preventing a future fire is wisdom PRICE: reasonable, comparable I wouldn’t call this a fast process, but the components design and function make this more speedy than other manual methods. And how much lint was there? A Basketball sized amount was removed from a 20 ft run

Awesome tool. Used it a at rental unit with the dryer in the basement. Got out four large piles of lint. Went twice up from the basement and twice from the vent opening outside. The photo shows the last of the four piles. A small bag to store the pieces would be a great addition.

Great product.

Easy to assemble and run. What will pour out of your dryer ducks will astound or shock you. Handled curves without making holes. Worth it for peace of mind.

It worked perfectly. I tried from the dryer to the exit but I couldn’t get it past the bend in the pipe so I went outside with it and it snaked itself past the bend and out to the dryer. 30 ft. My dryer works a lot better now.

Absolutely loving it; easy to use to remove lint stuck in exhaust pipe.