SPLF 100 Pieces 30mm Coin Capsules and 5 Sizes (17/20/25/27/30mm) Protect Gasket Coin Holder Case with Plastic Storage Organizer Box for Collection Supplies

ok quality for the price, nice storage case

I needed capsules with this 3.5 mm inner height for Casino $10 .999 Silver Tokens and am satisfied with the fit for the price of the capsules. They click closed nicely. The largest gasket is too small, so there's room around the edges. I think the half dollar gasket, quarter gasket and nickel gasket are adequate. The listing picture shows there will be a gap in the gasket for silver dollars, and there is. Also inadequate for dimes with the smallest gasket too oversized and too much inner height, it wants to slip behind the gasket. But I only planned on using them for Casino coins, so I'm quite satisfied. A true fit would cost a dollar a piece and I'm not ready to spend that much.

verry good quality and great size holder. the only ones i can find that are 52.6mm. I love them. I bought a set about 3 weeks ago and had to order another set because i have almost filled the first one up. the black backing really makes a difference and a more unique presentation and the fact that you can punch the size out that you need is awesome. I have put everything in mine from dimes to large silver dollars. Challenge Coins to poker chips and everything in-between in mine. I will have to say one thing about them is that if you have a challenge coin that has a significantly raised design on it they don't fit because they are too thick. Most on mine have fit just fine but a few did not. I tried finding the same outside diameter holders but thicker with no luck. these seem to be the only ones that are this size as i wanted to buy some bigger packages of them but can't find them other than these, but they are great.

This is a CHICOM product, so I was expecting quality control problems. Surprisingly, there were only a few. Some of the inner “gaskets” were missing: not the full sheet, but some looked like they were already punched out. Not a huge issue, but worth noting. More amazingly, Amazon shipped these in a very lightly padded envelope that would not have protected the plastic case during the hussle of the holiday delivery season, but the package did arrive undamaged. As for the product, these are NOT air proof as advertised, so I definitely would not put proofs, or silver uncirculated pieces. The clear plastic cover is highly susceptible to finger prints on the inside, so I strongly suggest wearing gloves or handle the plastic carefully. The box does come with two guitar pick looking devices that are easily kept inside the box of coins. Thes picks come in handy for opening the case and to press the caskets around the coin. I also found the picks very good at separating the gaskets from the punch out as well as removing unwanted gaskets. It took a little time to get the right feel for putting the coins in the gaskets. I found the best way was to have the coin faced down while using the picks to work the gasket around the coin. While the coin is face down and the gasket attached, place the “outer/slightly smaller inner” part of the case over the coin/gasket, then use the picks to work to lift the case and coin up off the surface and put the outer part of the case on. Do NOT snap the case by pressing the inside, as it will crack. My first at temp I started a hairline crack that if I pressed harder, would have broke it more. Because these are massed produced using non precision equipment, the 2 halves of the case may be quite loose during the assembly process. If the happens, twist the 2 halves slightly and the imperfection should cause some binding. Again only a minor issue. When you work the gaskets, do it from the back when the face of the coin is down on the surface. This will give a better aesthetic when looking at the face, while the back may be a bit wavy. You can tell which coins I did backwards. All the US coins smaller then a US golden dollar, fit snug and look decent. For the$1 coin: I left the outer two rings. 3 outer rings for the $.25, the outer 4 rings for the nickel, and the outer 5 rings for the dime and penny. The outer case is rounded to fit the coins Bette and is made of a softer plastic that shouldn’t crack while stacking or bumping them. THE SMALLER SIZE CAPSULES WILL NOT WORK WITH HALVES OR OLD DOLLARS. These are not intended for higher priced coins, or museum displays, but great for clad coinage, or circulated silver pieces. I feel the gem state coins will tarnish. Overall, a good purchase and I am considering ordering the larger size next.

Good quality!

Great product good quality plastic comes with enough foam for support of the coin and a pretty good size. It does not fit a half dollars or dollar coins, but anything else it will. Difficult to open the product at times you gotta find the groove and put your fingernail in there and kind of wedge it apart to open it. If you’re the type of person that has a pain in their hands and wrists all the time I wouldn’t recommend it because at times, opening the capsules to put your coin in there was a bit difficult at times. Apart from that, I have no complaints and would probably end up buying them again because after looking at some of the other ones on the market, they’re all similar. They’re all difficult to open some give you a specific a tool to be able to put it into the groove and open the actual capsule. Some don’t this one came with one, but I found it easier to open with my fingernails in. It is with the tool. Aesthetically elegantly displays the coin in the center of the capsule if you use the foam inserts and makes the coin look quite attractive.

These are pretty versatile in terms of being the same size outside diameter and adjustable inside padding. They work well the case is a nice touch so you can organize your coins. The only issue I ran into is with older dimes, the padding inside doesn't seem to be thick enough and won't hold the dime in place and it slides around.

Perfect for my needs. Secures coins and keeps them organized on a budget.

What you will receive is various sized coin protectors all rolling about because they don't fit into the foam cutouts sized for 46mm protectors, and no foam rings. When contacted I was promised that it would be resolved, I was to receive 46mm protectors, foam rings and a "gift"... Yeah, ok I just want what I paid for. A month later no replacement protectors, I only receive the foam rings that don't fit the plastic protectors. Essentially the item is useless for my purposes, then they only refunded half my money because they're already "out of pocket"

The product image shows the gaskets as black yet I got white ones. It also says that they are suitable for a Silver Eagle, but I had to force the eagle to fit. It does the job for most coins but ASE and silver Philharmonics don’t fit well. The white gasket also doesn’t look very appealing. Wish I got black.

悪かった点 ・到着予定日通りに到着しなかった ・保護ガスケットがブラックとなっているがホワイトが届いた ・収納ボックスが入っていなかった 良かった点 ・返金対応が早かった

Decided recently I wanted to properly display and show off the nicest pieces in my collection. These are a great cost effective alternative to quadrum and similar capsules while still being pvc free and quite nice for smaller coins

Para conservar monedas o timbres antiguos, la mejor forma es con la encapsulación de estos materiales para evitar la oxidación, manipulación y mancharlas. Este producto es muy bueno porque tiene la posibilidad de recortar el fomi y mantener la moneda fija.