Antec NX600 Mid Tower Gaming Cabinet Support ATX, M-ATX, ITX Motherboard with Tempered Glass Side Panel, 4 x 120mm ARGB Fan (3 in Front & 1 in Rear) Preinstalled

First I would like to thank Amazon for delivering this beautiful case at attractive price without damage.The Case Is a Beauty with all fans positions already occupied. It came with total 5 Argb Fans.2*200Mm ARGB Front2*140mm Argb Top1*140mm Argb Rear.All fans can be controlled with included 6 fans Argb controller and can change effects from case button in front.The only Con I found about it is fan's speed can't be controlled. They are silent but not fully silent silent so I guess Antec should have provided at least some way to control speed.Also all fans comes with Antec proprietary 6 pin which only works with Antec controller.The Main Highlight Of the Case for me is front Mesh.The Case Just have too much Airflow.Overall Happy With The Case and Cooling Performance.Looks like Antec have winner in their hands.

I ordered this case for building a beginner level gaming pc......what happened is that I found the front panel locks are damaged and the panel keeps falling off...I tried adjusting it with the remaining 2 locks but surprised to see its build quality....such a poor build quality(locks)...I refunded ...Now goin to order CM case....not going to buy antec anymore...I attached pics along with this.

At first when recieved it was damaged the. When replaced and recieved a new one same dent was there but less it was a hassle to change so i am using like it is i hope you get it properly the glass is very delicate while i game for long hours the heat tends to pile up inside so have kept the glass panel open have to install all the fans then i guess the heating problem inside will go away

After delivery I found back fan is not working 😒, and the front fan is also not so good. It's not capable to suck proper amount of air. It's not good for this price range. But the case material is good.If you wanna built the cage by your own with some more investment, by adding some good quality fan. Then it is too good.

The fans have 4 pin molex headers that can only be connected to the psu directly, that means they will run at full speed all the time and there is no way to controll the RGB led lights. The case has a led controller button with a 2 pin header to connect to a separate controller but I can't find any led controller with 2 pin header. My motherboard has asus aura rgb but that header is 4 pin. No documentation or support from Antec regarding this.The PSU has to be fixed at the top, so why is there a grill and dust filter at the top if most of it is going to be blocked by a psu anyways? Poor design. Even if I buy a separate good rgb/fan controller, I will need adapters for the molex fans and that button.This will be my first and last buy from antec. Cooler master is better with design and support.

Pros: 1. PSU Shroud2. Good looking. Sleek and simple.3. Decent airflow once all 3 (max supported) 120mm fans are installedCons: 1. No hole left on topmost corner, motherboard occupies the space leaving no space at top to route CPU Cable from the back so you have to bring CPU power cable from the front. Also Main 24 pin motherboard power pin cannot be routed from behind unless its really long cable so again have to route it from the front. This way ALL CABLES ARE VISIBLE Through the side panel which defeats the purpose of the transparent side panel.2. Only supports 3x 120mm fans not even 140mm.3. Front mesh I fear is not dust proof. Also Mesh is present at bottom on PSU intake but that too I fear doesn't trap dust.Final Verdict: Poor design on cable management killed this otherwise very good case. Also, IT IS NOT GREY IN COLOUR AS IN PRODUCT IMAGES, IT IS BLACK IN COLOUR AND SIDE PANEL IS ALSO VERY DARK, PRONE TO SCRATCH. Very disappointed as it looked very good but is poorly designed from inside.

Looks are awesome. Build quality is good.You can install maximum of 7 fans for airflow.Cable management is also good and easy to install.And side glass panel window is prone to scratches.Bt value, keep in mind this is the best cabinet you can get at this price point.

A pc cabinet is just a enclosure to properly fit all the components so they stay firmly in their place.A gaming cabint should have.vents on the top to let heat escape with dust filter.Grills for fans.Provision for cable management.Little thick guage material, so it doesnt vibrate.We are paying extra for the craze that we have forThe glass side pannel that lets us see what is insideAnd for the led light effects.For the looksIt looks good.

Really good value for money case. You can change the rgb colours from the case itself so you don't have to download any software. There is only one button to do this and probably over 20 modes so you can just go through until you find the one you like

Ottimo design, cosi come i materiali utilizzati...non posso dire lo stesso delle ventole che non essendo pwm girano alla massima velocità creando un po di fastidio sopratutto quella posteriore che ho provveduto a sostituire subito ( le ventole hanno attacco proprietario, da collegare alla scheda madre attraverso l'hub fornito). Una delle due ventole frontali leggermente rumorosa. in definitiva il case e carino e la struttura, cosi come le plastiche, sono di buona fattura...per 100 euro dovevano mettere delle ventole migliori e con controllo pwm. Ve lo consiglio a mani basse se lo trovate sotto gli 80 euro...Aggiornamento, la ventola rumorosa non era del case ma proveniva dall'alimentatore, un Gigabyte g750h 750w gold (nuovo)...deluso, ho provveduto a sostituirlo con un sharkoon Silentstorm cool zero!Purtroppo fanno rumore anche le due ventole da 200 mm (entrambe), quella da 120 mm nel posteriore già sostituita con una della Arctic collegata direttamente sulla scheda madre. la sua originale era un tornado, sempre al massimo. Non chiedo il reso perché sono sicuro che è un difetto proprio delle ventole montate su questo case, quindi perderei solo del tempo. Più avanti provvederò a sostituirle con 2 da 200 o 3 da 140 mm della Coolermaster. Chi acquista questo case, sia consapevole della scarsa qualità delle ventole.

The NX310 looked really nice from the pictures with the RGB fan and strips along the front. The case itself is a bit thin, but then again, its a budget case. My RGB fan came DOA and I'm waiting for Antec to assist - however the strips are beautiful and vibrant. What I did NOT like was the rear fan that uses 2 wires and has a MOLEX connector! I don't know why in this day and age there is still MOLEX fans? This means you cannot even connect it to your motherboard directly, you have to somehow connect it directly to the power supply - and if your using a modular power supply, that means likely connecting an entirely extra connection/wire (molex chain) just for this fan?? Also, the RGB is powered by SATA power only, and controlled by the case button ONLY, you cannot connect it to your motherboard. I want to install more RGB fans and would like to use Antec fans, but have no idea how to loop them all together?!EDIT: 1 additional star added because Antec sent out a replacement fan quick time which makes them Boss. At least Antec made it simple enough to get parts.

La caja en si esta bien pero tiene sus pegas.Las patas son de plástico y no tienen suela de goma sino de espuma, pinta que no van a durar y encima las traseras vinieron con la espumas 1cm adelantadas de su sitiio.El filtro de la fuente es el mas sencillo y endeble del mercado, he tenido de estos y si no vas con el cuidado de un cirujano se terminan rompiendoCalidad del material restante decente pero me llama la atenciin que sin tapa debe pesar 5 o 6k y cuando le pones la ventana pesara el doble o casi.Vienen con los 3 ventiladores de la imagen y parecen de calidad aunque aun no la he probado, lo mismo los botones , se ven robustos.

Mi e' piaciuta la dotazione delle ventole del case 3+1 poi ripeto bisogna assemblare una configurazione che sfrutta bene quel tipo di air-flow cioe'non esasperata ad esempio cpu mx ryzen 3600 un buon dissipatore ad aria etc etco meglio i ryzen 3100-3300x .......