PowerZone 380047 1700 LB Hydraulic Motorcycle/ATV Jack

Item arrived intact. Understandably, the box was slightly damaged due to the weight of the jack, but inside, everything was OK. Assembly was straightforward and took only about 10 minutes. The dual platform arms are a bit small but they did the job after I made a custom lifting block to fit my 1983 Honda Silverwing. The jack had no problem lifting the entire bike however, due to the small lifting arms, the load was slightly unstable. There are no stabilizing screws as illustrated in the amazon picture of the product. I assume I received a later model that no longer had the screws because the frame of the jack looks to be more substantial than the model shown by amazon. Overall, I'm satisfied with the build quality. It looks to be about as good as can be expected from an economical Chinese product. I would recommend this to a friend.

This jack is great. It lifts my 800+ Yamaha Roadstar Silverado easily, has a nice slow foot control to lower the bike easily to the ground, and what I like best is that it is very stable. No problems whatsoever and assembly took little more than five minutes.I spent a lot of time reading reviews of most of the major brands out there, I'm not sure why some claim the jack isn't stable but I have to assume it was an assembly problem or a defective unit. Highly recommend this jack.

Easy to assemble and works ok. I think the lift release could be slower and the jack locking bar could be spring loaded but all in all a very good jack. I will probably make a spring mount so the lock will auto engage; the manual act of setting it should have been Murphy proofed. That's why I gave it a 4 star. Other than that it works perfect for my Suzuki 1500 Intruder and it's rock solid. And, for those who complain about the assembly instructions?? all I got to say is if you can't assemble this jack with ease or even without looking at the instructions, like I did, you probably shouldn't be jacking anything up to work on. This thing is so easy to assemble it really isn't a mention.

This thing is amazing. I have never had a lift and got it for my Harley Road King. It fits underneath perfectly and lifts very easily. You need to be aware of centering the lift on the bike but that is just common sense. It is strong and easy to use. My Harley weighs 830 lb. and lifts it with ease and keeps it up. I have even moved the lift while the bike was in the air. The wheels do accommodate movement but I am a little nervous to do that alone.Great for the price.

First off this jack does appear to be well built and strong. If it actually fit my motorcycle I would probably keep it.The problems I had with this jack is:1. The directions are not very clear as I had to read each step and then look at the picture to determine what and where the step was reffering to.2. The saddles (pads/arms that go under the motorcycle) are to short for my bike. They are 11" long and my motorcycles frame width is 12". Amazon and/or the company NEEDS to put the length of the pads/arms in the product description as this is VERY important information for the prospective buyer.3. The swivle wheels do swivle but not very easily. My guess is there is just not enough weight on those wheels to make them function properly. I think they MAY work if there is more weight on them like if my motorcycle is actually up and on the jack but I was not able to test this as the jack does not fit my bike.4. The minimum height of this jack is 4 1/2". The ground clearance (height of my motorcycles frame from the ground) with my bike on the kick stand is 4". Not a big problem (or I thought it wasn't) as I held my bike upright with one hand and tried to maneuver the jack under with my other hand. This did not work. I was able to get the jack most of the way under my motorcycle, unfortunatelly there still was not quite enough room. All I was able to do is scratch up my garage floor trying to get this jack under my motorcycle. When I finally got the jack out from under my motorcycle, one of the rubber pads was pulled off as there was just not enough room for it to move around. I think if the swivle wheels would actually swivle like they are supposed to I would have been able to manuever the jack under my bike a little easier.The reason I gave three (3) stars is because this jack does appear to be built strong and it looks like it would be sturdy with an ATV/motorcycle on it.I STRONGLY ADVISE anyone that is interested in buying this jack to measure your ATV/Motorcycles frame for it's width and ground clearance so you do not have to return it like I have to.

This is an extremely nice product. Goes together fast, rolls on the garage floor easily and raises and lowers very well and predictably. Hard to believe the quality you get for the price you pay, particularly if you have Amazon Prime free shipping. I use this for an ATV. Added a couple of 2x4's to raise the working height a bit (depending on your bike, it may only raise the vehicle a couple of inches, but try to find one that goes much higher than this for less than 3 times the price). Once raised the vehicle seemed very stable, but I felt better strapping it down anyway (doesn't come with its own straps - didn't bother me because I have a bunch of them). The foot pedals are easy to reach and use and the lift lock looks like a sturdy and well designed mechanism. All in all, this was a great purchase. Highly recommend to friends and family.

Jacking up and propping up my Honda Foreman ATV with jacks, stands, blocks, etc. was getting old fast. I needed something to do the job right! The PZ 380047 suits the job perfectly! The price seemed right, it came well packed, everything fit well, and it was easy to assemble. And best of all, it jacked up my ATV slick as can be! Easy-peasy! Just pump it up with the foot pedal, lock it in place, get the job done, then drop 'er down with the other pedal. I love things that make my life easier. This little lift does just that! Recommended!

It did what I needed to be done. Lifting an 800 pound bike heartbreathing.