ERP DG94-00520A Range Igniter

Our Samsung oven what taking forever to heat up, and I diagnosed it to just not igniting the first few times it tried. The actual part install is super simple, a couple of screws and unplugging the wiring harness. The oven fired up perfectly the first time, and I've never had a problem in the 6 months we've had it.The only caveat I'd put in here, and it has nothing at all to do with the part, is that when budgeting your time to replace the ignitor, you probably want to budget some extra time to actually get to the part. Our oven was only like 5-6 years old, but even then the heads of the screws holding in the panel inside the oven to be removed had gotten brittle. The wife does do the oven cleaner thing quite a bit, and one screw was "welded" in place with carbonized food. I ended up having to dremel tool new slots on the screw heads or cutting a flat spot for vice grips to have something to grab onto.Once you get the access panel off, everything else is super easy and the part worked perfectly.

Good value. It solved the problem with my Samsung oven taking a long time to get to temperature. Installation was not hard. It’s been in there a few months now and works great.

Have a Samsung oven that suddenly wouldn't heat up. Watched a Youtube video and replaced this part easily. Oven works great now. Oven seems to heat up a little slower than I remember but maybe I remembered wrong. Not sure how long this fix will last. Part material looks decent but it is not Made in Mexico. Doesn't indicate on part where it is made but the exterior box said Made in China.

Our Samsung oven was constantly reigniting and diagnosed as bad igniter. Been a year and no issues with part. Easy to install and replace with various videos online.

My Samsung oven failed a year and a half ago and some research brought me to this part. After viewing videos on line, it was relatively easy to replace myself and saved me potentially hundreds of dollars in repair cost. Flash forward to now, and this igniter has begun to fail (sounds like the gas is shutting off every 6-8 seconds for a second or so). So, I bought another one of these, replaced it and everything is great again. Do I want to have to tear my oven apart every year and a half? No. But this piece is so cheap, I could buy 4 or 5 of them before I'd hit the cost of an OEM Samsung part.

Needed to replace oven igniter on my Samsung range. Side by side comparison showed them to be twins, right down to the wire length and connector. After a fight with one screw that needed some penetrating oil to come loose, it's a pretty simple process. Save a lot over Samsung OEM part.

I purchased this for my Samsung gas oven, because it would take over an hour to get to 450 degrees, and the burners were "pulsating" when the oven was heating up. I looked online and found that it could be an issue with the igniter in the oven. This particular item has the plug that is used in the Samsung oven so it was basically plug and play. The hardest part of the install was getting into the space where the igniter rests. The oven being 10+ years old , meant the screws were fused on tightly. A little WD-40 and some patience and strength, I managed to get into the compartment with only stripping one screw. Once I could get to the heating bar, all I had to do was unscrew two screws that were holding the igniter to the heating element, and that was all. That part took me a total of 5 mins. Total time in replacing the igniter was less then an hour. It was definitely worth my while to do it myself instead of having a person come in. Once replaced, it took less then 10 mins to get to 450, when prior it would take over an hour.

Great $20 fix for a $500 stove! They don’t make appliances to last anymore! Had this stove for less than 5 yrs and it stopped maintaining oven temperature. So glad they have these after market parts. They work fine and cost a fraction of what u would pay for genuine Samsung parts! Works for me. Took about an hour to install diy

I ordered the wrong part but only the wire connection was the difference. Remedied & works fine.

Easy to install, does what it should

Identical to what I had on my GE oven

It got my Samsung Oven working again. Installation took about 15 minutes total and required only a Phillips screwdriver.

Great for the price,I have a LG gas stove, the only thing was that the plug in fitting did not match, so I just cut the wires and used my old fitting to connect it, not a big deal, it was worth the savings