799868 Carburetor Compatible with Briggs & Stratton 498170 799872 694202 497586 498254 790821-14111 Carburetor +795259 Air Filter Cleaner Primer Base By LEIMO

Value for your money. Easy to install. Runs great.

I had my doubts, considering the low cost. I've used inexpensive after market carburetors on small engines before with mixed results. If you look at the throttle plate in a carburetor like this, compared to an OEM, the fit is pretty sloppy, with visible air gaps around it. The good news is that really doesn't matter on a lawn mower because you aren't running it at a low idle. So I found this carb fit perfectly, and ran fine. They were thoughtful enough to send two gaskets, which are often needed to seal the plastic plate properly. The priming bulb worked well also. In fact, everything included worked well. An awful lot of thought goes into a kit like this. It includes every little thing that you might need. That speaks well for the manufacturer/supplier. Five stars plus.

Good quality, fit perfect, work function is great,easy install, good for the money, fixed my problem

It looks like a perfect replacement for the factory carburetor and the primer assembly. It was easy to install, and the quality looks good. However, mine is very hard to start. Three pushes off the primer button. But the new one does not start with any amount of Priming. I switch back to the original primer bulb assembly just in case. But the same result. If I spray some carburetor cleaner into the air intake, then it starts and runs beautifully but once I stop the engine, even if the engine is warm, it doesn’t start back up. On close inspection, I realized that the old carburetor is a small pin size hole, in a small brass fitting near the primer air hole. The new one does not seem to have that hole. I ordered a second one just in case the one I received was a bad copy. Let’s see of that one will work.

It fit the mower. It seems to work pretty good. It's a lot lighter than the original. So not OEM quality at all. It has a few more plastic parts. But it's cheap and it will make an old mower work for a few more years. It I also has all the accessories you would need.

Worked well! Have multiple 5-6 hp push mowers and this kit would have fit all of them. Simple and straightforward installation. If having issues with starting after install be sure to check for spark through the spark plug.

2006 6.5 hp Craftsman 21" Mulcher mower. Mower was starting and would die right away. I took the carb apart and noticed the float was setting at about a 45 degree angle and would not open the needle and seat. I bought this new carburetor opened the bowl to check the float and is was working correctly where the float would set level and the needle and seat functioned properly. Put this carb on and the machine runs like a beast now. better than it has since first buying the mower. There are several of these carbs on amazon, I chose this one because it had exact dimensions in the description so I was able to measure and complete before I completed the purchase. This came with gaskets, spark plug, air filter and filter case with pump button and hose. Very easy to replace. I am happy with this purchase and would buy again.

I pulled my walk behind weed eater out of the garage having a vague memory of it not working a few years ago when I tried it last. I figured that like most small engine issues I've dealt with - it was probably a gummed up carburetor and these days a new one is less than $30 - so I ordered this replacement. Easy fix - I thought. When it arrived I installed it and was confused that the engine did NOT run well with it. I don't know all of the proper terminology so it is hard to describe small engine symptoms... but it sort of stuttered along at an idle and would not run smoothly. I was sure that I had done something wrong on the install - and so took it off - checked everything to make sure that the moving parts moved, put on a different spark plug just in case that was the issue, put the carb back on and started it again. Same issue. It just kind of barely ran. In a last ditch effort, I put the old carb back on to see what it would do - and was surprised that it ran flawlessly. Which of course made me wonder why I didn't test the thing out right away before buying the new carb. But in any case - bottom line is that the carb that was sent to me, even though it looked identical in every way to the original one and appeared to be in good shape, did not work at all. In the end I'm not positive what the issue is - but the evidence points to either a poor quality product or poor quality assurance testing at the factory.

Terrific company to deal with. Fitted to an old Big Bob mower.

Tres bien fait

Everything you need to get back to cutting.

Bolted right up

Didn't use carburetor , just other parts. Working good now. Will keep carburetor as a spare if needed down the road