SEBSON 2x PIR Sensor Ceiling Indoor 360°, Surface or Flush mounted, Recessed Infrared Motion Detector, LED light suitable, Range max. 8m /360°, max. 1200/600W, IP20

Works a treat in my bathroom and goes out on a timer so the grandkids don't leave the light on anymore good stuff saves me a lot of going up and shouting have you turned the lights off ,don't do that now good solid kit you do need 4 core wire to fit it but it's not hard to figure out and get it working goo stuff

Easy to install and setup. Works well.

The media could not be loaded. I installed this in a downstairs WC under the stairs.FUNCTIONALITY: Detects well when you enter the WC avoiding my main concern that would trigger if someone walks past. It doesn’t. However WC occupants need to move to keep light on.INSTALLATION: requires Neutral as well as permanent and switches Live cables. I surface mounted because no space between plasterboard and stairs. However the backboard has not an additional space therefore extremely difficult to wire in. I used the old backbox of previous pull light switch and created “tails” with flexible wire to connect the switch.

Works as it should and cheap for 2.How long it will last I will have to wait and see.

Easy to wire in and starts working.

Fitted and working as required.

The media could not be loaded. Works perfectly well. As others have said, it's a little tight to get your fingers in and work on installation but as a non-electrician I followed the instructions and got it working. Still need to paint the ceiling but it's great functionality. We surface mounted it in-line with an existing light and put the switch to always on. Timer easy to adjust. Would order another one. Excuse how messy our store room is in the garden room!

Quotes 0.5W standby current but my example actually took between 5 & 7W (on or off). If your lamp is only 5W, running costs would be lower if you remove this PIR and leave the lights on 24 hours a day