Universal Aluminum Grooved Magnetic Furniture Jack Pad Jacking Puck Pinch Weld (Slot Width 0.55 Inch) Frame Rail Adapter (Qty 1, Black)

bought this to rotate tires on 2023 Mini cooper SE, it fits perfect and kept the car stable as it was raised. rotated all 4 tires without issues. fitment did have a little bit of wiggle room but not enough to affect the usage.

It's the correct size, I've used it multiple times now. As some have stated, some floor jacks don't really support it well. Best would be one with a flat rubber surface. Conveniently, there are two holes on the bottom of these, I just printed up a little centering widget to be sure it aligns well with the cup-shape on my floor jack. On my 2-post lift, no issue at all because it has 5" dia flat lift pads.

The plastic is rock hard. I wouldn't use this one with a Jack that has big teeth on the end. I have a Daytona 1.5 ton that has a very flat lifting face, so this wasn't a problem. Also, the magnets don't hold at all in my 2013 X3. Works fine otherwise.

I used these to change my tesla rims. These worked well and make the job easier. I have to change rims from summer to winter, so this makes life much easier. Super high quality. I like the color also its easy to see under the car.

All of my BMW vehicles were purchased as pre-owned vehicles. Every time I buy a "new to me" used BMW I am never surprised when I lift it off the ground for the first time and discovered that the jack pads have been completely destroyed by either the previous owner, or, more likely, the people that have done maintenance on the vehicle on behalf of the previous owner. People who are new to the brand simply don't know how to properly utilize the jack pads that are fitted to every BMW vehicle. The jack pads are made out of hard plastic that is fragile if used incorrectly, but incredibly strong and provide extra stability when used properly. You must use a jack pad adapter of some type in order to utilize them correctly. Most people, however, simply don't want to spend any extra money to use them properly, or don't know what they are, so the jack pads get destroyed over time. Then the vehicle gets sold to someone like me who ends up having to replace all of the broken jack pads. It's my lot in life.What makes these Potauto Universal Aluminum Jack Pad Adapters SO useful is that they are very well made, they are durable because they are metal, you can get them in bright red, and they are very reasonably priced. Why does it matter to me that they are red, you ask? Well, I once drove around for two weeks with a black jack pad adapter made by a different manufacturer stuck up inside one of my destroyed jack pads without even know it. Once I had lowered the car, the adapter didn't drop out of the destroyed jack pad. It was dark, the jack pad adapter was black, I was tired, and I didn't notice that it was stuck up in the damaged jack pad. Can you imagine a metal jack pad adapter coming off at 75 mph on the highway! Luckily that didn't happen, and I'm surprised that it didn't. All of my jack pad adapters are now red, and I never leave one behind.Therefore, these Potauto Universal Aluminum Jack Pad Adapters in red are a must have if you work on your own BMW. Utilize them properly and keep your jack pads in factory condition.

This is a review for the Mercedes pad made to fit the indention on the jackpoints on the sides of the car. The 2000's and newer MB have these weird rubber pad things on the jackpoints instead of a typical pinch point or even just a flat surface, which make it difficult to use a standard jackstand. I'm happy to say that these aluminum pads are a near perfect fit and allow use with both a jack and/or jackstand.I did consider the rubber versions of these pads, but read too many reviews about how the rubber ones deform, and didn't want to deal with that, so went with the aluminum pads.When I test fitted these pads before use, I was a bit concerned since they are not a flush fit in that the middle portion is about 1/4 inch too long, which means that the car rests on just the middle raised portion. I wasn't sure quite what to expect with this kind of weight distribution, so I jacked up my car by the center jackpoint, and then lowered them onto the jackstands with these jack pads in place, half expecting the car to slide off of these slick looking aluminum pads. However, once the weight of the car was on them, there was absolutely no movement at all. I did the usual shove test to make sure that the car wasn't going to go out of balance and was going to slip off the jackstands and fall on me and crush me while I was working on it, but it was as solid as can be.Quite happy with how these aluminum pads performed, and also happy to see that there was no deformation in the metal and no signs of scratches or indention or any defects after the first use.

Perfect to use with hydraulic jack to raise vehicle correctly. The tire screw jack is solid from Audi but this makes servicing so much easier. Great Aluminum made disk.

I usually jack up my vehicles from a center jack point or at the control arm mounting point, but sometimes I have to use the pinch weld. This eliminates all problems and the magnets are strong enough to hold it where you need it. This little thing saves me aggravation.

OK, for you BMW heads, take head PLASTIC/RUBBER pucks are BAD news UNLESS, they are more that 12mm tall, the colum that fits into the adaptor MUST be tall enough to support it, OTHERWISE it will REST on the rubber and bend it HORRIBLY, this will cause wear and tear and it to break, NOT GOOD if your under a jack.I did a test fit and it fits my 2 series properly, very sturdy un breakable nylon,I will modify my review if I have any issues, which I doubt.Looks great so far awesome product, DONT WASTE YOUR TIME, MONEY and SAFETY on Rubber adaptors... just dont

They fit fine although the magnets did not hold the pucks up. Not sure if the magnets are too weak or non metallic on the car location. I just had to line them up with the jack.Overall pleased with the value of this purchase.

Excellent little tool. The cup of my floor jack does not easily seat at the jack points without a body mould or clip getting in the way. This lowers the jack point just enough so that the jack's cup will not touch plastic moulding that wraps under the rocker panels. It presents a nice smooth round surface for the jack to "connect" to. The magnets hold it in place while you raise the jack. No slipping once starting to lift either. Very solid well made tool. I bought both the 0.55 and 0.39" as I didnt know which one I would need. Now that I have both, not sure the 0.55" will ever come in use. The gap that fits the jack rail is quite wide. I have used the 0.39" on a Caravan, Sonata and Chrysler 200 and it fit all three well.

Buena calidad, cumple con su propósito, pero no fué lo que yo necesitaba.

The disc is well made. I have used 4 times now and no signs of wear. It fit my BMW just fine.I would definitely buy it again if I lost my present one or decided on the need for more than one.