LED Turn Signal Side Marker Lamps for 2010-2014 Ford F150 SVT/Raptor

Perfect fit for my raptor. Love the smoke look on them over the stock white lens.

I ended up picking these marker lights up after one of the lights went out. I originally planned on replacing it with the factory ford part, but after looking on the other side, it was pretty worn out looking too, so I decided to save a buck and order these. The removal and installation is easy enough. You can get it from under the truck no problem; however if you are having problems or its not easy for you to get below the truck for whatever reason you can pull the three (3) 10mm bolts on the either headlight to give you extra room. 2 of the bolts are on top and face upwards, one is about halfway down on the grill side of the light. Easy peasy, just unbolt and you can get at it no problem. Another thing that some of the reviews state is that is that you need to completely cut the rubber grommet between the body and the light itself, or cut the wire and splice it together to make it fit. Thats not the case at all. When you remove the grommet from the body make 4 small cross cuts on it and it will allow you to thread the plug through it while the grommet will still retain its structural integrity and keep the light in place once you install it. Just be careful and do it slowly. I used a hobby style exacto knife, but a sharp pair of scissors will do the trick. Once you get the grommet on you can thread the wire through the mount and plug it in. Super easy job, even if you need to take the headlight off to get at it. Once installed the light is just as bright as stock when on, and more subdued when off. If you liked the smoked look, it will do the trick.

Yes It works fine, but no installation instructions.

One of my Raptor grill lights went out and I purchased these to replace it. They bolted right in and the connectors worked well. The LED configuration is a little different than the stock bulbs, but they work well. I'd suggest replacing all (3) of them so they match. Good value for the money. FYI, use caution when bolting/unbolting the lights. The studs are plastic and molded as part of the grill.

Reuse the rubber base, look great

B E W A R E NOT RED LED 2ND TIME ORDERING AND AMBER DO NOT BUY UNLESS YOUR JUST LOOKING FOR AMBER LEDS

I had the center OEM grill light out and these did the job but not to my liking. I like that they are smoked lenses and they fit perfectly BUT they are not as bright as OEM and look cheap as you can see it’s a single skinny LED strip front end to end. OEM has 4 bright bulbs as their light source. But he it fit well and for the job down so all 3 work now. This will hold me off until I save for the Morimoto replacements.

Shipping takes forever (5 weeks from order to delivery). Received today and Installed. Very easy install, maybe 30 minutes. Plug assembly and light lens shape perfect fitment for my 2013 Ford Raptor. Only one thin row of LED lights within lens, but certainly bright. Will report back if lights fail prematurely as some others have experienced.

They fit and function great! Only thing is you have to cut the grommet to get it around the new light but with a small razor blade its easily done. Very easy to install

De muy buena calidad y se ven fantásticas... Muy buena calidad y compra... La recomiendo ampliamente...

this order was a re-order, 1 light didnt work on the first order

merci

Excelentes luces... De muy buena calidad... Las recomiendo ampliamente...