🚗 Elevate Your Jeep Game with ECOTRIC Flares!
The ECOTRIC Flat Front & Rear Fender Flares are designed specifically for 2007-2018 Jeep Wrangler JK & JKU Unlimited models. This set includes four heavy-duty steel fender liners that provide maximum clearance for larger tires while protecting your vehicle from mud and road debris. With a textured black finish, these flares not only enhance your Jeep's rugged look but also ensure durability in harsh weather conditions. Installation requires drilling and removal of factory flares, making professional installation advisable.
Color | black |
Brand | ECOTRIC |
Vehicle Service Type | Truck |
Auto Part Position | Front |
Installation Type | Screw-In |
Finish Type | Polished |
Manufacturer | ECOTRIC |
Model | ET-142 |
Item Weight | 44.1 pounds |
Product Dimensions | 47.64 x 21.65 x 6.3 inches |
Exterior | Textured |
Manufacturer Part Number | ET-142 |
T**T
Fairly good quality. Look amazing.
So first off, these were installed on a 98 Cherokee classic. The package was shipped quickly and was packaged perfectly. The bolt bags were zip tied to the rubber packaging materials which is a great idea because if the box is damaged in shipping the bolts will likely be lost in transit (I've had this happen previously on other large items). They are by no means designed to fit this vehicle. We did a lot of backyard modifications to make them work. I chose these ones for the JK wrangler because of the angle of the curves on the rear wells. With cut fenders its impossible to bolt on the ones that are marketed for and XJ. We had to slit and bend the driver side and weld it in place to allow for the gas door to still open. We had planned to slit and bend both of the rear flares to make them level and not be sloped as seen in the pictures. The problem with that is that since we have cut fenders and 35" tires, the flares would have to stick down in the wheel-Well and would then rub the tires when flexed. There also wouldn't be enough room to bolt them for stability and they would have to be welded on. The front flares fit amazing except for one spot (where the XJ fender trim is). We used flat steel and clamps to reshape the body metal so the flares could sit flush. The (plastic) body trim had to be cut and trimmed to line up and allow the fender flares to bolt flush. Once installed these are the exact same width as the side mirrors when in driving position. This is perfect for us since we have 35" x 12.5 " tires and we installed these to keep the mud from slinging to the windshield. The only problem is that we slide through narrow trails and sometimes beat the mirrors off the trees. I am expecting to bend these at some point and I will post updated pictures after we bang them off a few trees. Took it out tonight and finally got to test them and the results were great. I can now leave my windows down while banging off the Rev limiter in the mud (forward and reverse). Very happy with the price and quality. (You can laugh at the angle of the rear flares because they look kind of goofy, but that was the best solution for what we needed.)
M**
Love these fenders!
I was super excited to get my new fenders for my new Jeep! After I put them on I realized a reflector was missing. Even though it took me a few weeks before putting them on an noticing the missing reflector, I reached out to the seller to let them know. I was very pleased at how quickly they responded and was very courteous and understanding. They made it right by sending me new ones and very quickly! I am loving my new fenders on my jeep! Would definitely purchase again if anything were to happen to them.
C**T
Ignore all the mounting hardware.
I put these on my JK and they look great. Especially at this price point. They have the classic square flat fender look and the rivet pockets make them unique. Ignore all of the hardware! Get 1/4 inch plastic push rivets or get the factory JK T shaped fender clips. They install in minutes with the push rivets. Use two of the M4 10 mm bolts and small flat washer for the u-nut on the front fender. I used gorilla tape to secure the wiring to the inside of the front fender. Simple as that. Only reason for four stars is that the rear fenders are not DOT compliant with the amber lights. I am going to remove them and cover the holes with flat red reflectors using double sided tape.
B**I
Junk
These are complete junk do not waste your money I will be returning them ASAP my husband took my old one off and now can’t even get it back on because some special clamps broke when he took the old one off to put these on theh are made crappy and come with no instructions DO NOT WASTE YOUR MONEY
W**Y
If these were not Cheap they would get 0 stars
Someone before said it best, it's like the jig they use to weld these is wore out. I had to actually bend one of the fenders for it to go on. The other side I just barely got the bolt in. The back has 2 bolts and the self tapping screws they give are trash. They look ok and give me more tire clearance for the 37's with just a 2.5 inch lift so they will work, but I would not buy them again.
C**S
GREAT EXPERIENCE!
Product is much better quality than previous generations and other brands. Look FANTASTIC!! Had a small issue with missing components and Customer Service resolved quite quickly and completely!!
A**T
Wired incorrectly
The wiring was mixed up. My front wires with had no end connection, just wires like needed for the back. When I emailed the company they asked for an order #. I gave them the order # from my receipt and they said it wasn't the right one. I don't have another one and now I have fenders that I have to strip the wires and reconnect if I want the side lights to function!
A**R
Jk
Worked well, but slight modifications
Trustpilot
1 day ago
2 months ago