STEBRUAM 110PCS 125mm Sanding Discs, Orbital Sander Discs Include 60 80 100 120 150 180 240 320 400 600 and 800 Grit Sand Sheets

Transitioned from the red discs to these yellow ones. These are all i use now, they last twice as long, a little more expensive but we'll worth the money. They do seem to grit much better too and have less clogging than the reds.

Simple, work well at reducing dust.

They do come off my dewalt sander asides that they are really good .

At less than £20 for over 100 assorted sanding discs, I was expecting to get through quite a few of them in order to remove the old varnish, scratches, dents and blemishes in the furniture I'm restoring, but I reckon they're actually better than some of the big name brands!I used an orbital sander with extraction attached, starting with the 60 grit to cut through the varnish, then progressively finer grits to work through the deeper scratches and remove the course grit sanding marks to leave a really good finish. The discs adhered to the sander pad well, didn't clog up and lasted a surprisingly long time!I imagine softer coatings might clog up the discs faster, but I'd advise scraping the excess off first before you begin sanding. Also use extraction if at all possible as this benefits the discs and your health. I find if you take your time and let the machine do the work, the weight of your arms to keep the sander under control is all the pressure you need.

These did exactly as advertised. There's a good number of each grade of disc and a vast choice of grades. They stick perfectly to my sander and do not tear when in use. I will definitely be buying again👍

Nice disks

Quality product as described. Will buy again

The good:The sandpaper is decent , the grades seem pretty accurate, a good selection of discs.The bad:The backing isn't stringy enough, they don't stick onto the circular sander (Bosch) strongly enough.Fine grades are ok, the disc creeps over the holes over time. But coarse grades don't work - due to higher friction, the disc comes off, if you apply pressure you get a little bit of working time, but as soon as you raise the machine the disc just flops off. Pity.