GAsupply 4x110 ATV Wheel Spacers 2 inch with 10×1.25 Studs, Wheel Spacer Adapters 74mm Hub Bore, Compatible with Honda, Suzuki, Yamaha, Bombardier(Read Listing for Year Model Info), 4 Pack

Great spacers fitting perfectly. Inch and a half worked great. Adds stability and a smoother ride.

Fit perfectly on my 2020 Suzuki Kingquad 750, it made my atv look so much better and it made the stability 10x better. I highly recommend putting loctite on your atvs studs so the spacers don’t vibrate loose because that did happen to me the first major ride I went on with these. But other than that I highly recommend these spacers.

Seems to be well built and installed in minutes. Pretty self explanatory but the instructions do include a handy reference chart with recommended torque ratings. These allowed me to install a set of OEM Honda take-offs from a newer IFS machine and not have to flip the rim around backwards.

Well built spacer fit good no issues

Works great give the sxs more stability side to side made the steering a little different but that was to be expected it didn’t destroy the steering just made it a little stiffer than original only down fall to this product is just not any socket will fit into the mounting holes if I didn’t have a 110v steel lathe to turn a socket down I’m not sure how I would have got them installed would be better if the manufacturer would fix this problem for future buyers that’s the only reason it wasent 5 star

Good solid product so far. 2005 Rhino 660. They fit perfectly.

The lugs on my CFMoto Cforce 600 are a little short so the lug nuts only go on 3/4 inch before bottoming out over the wheel spacers. I think that's enough to hold. That's an ATV issue, nothing against the wheel spacers. The wheel spacers were all machined well and fit well. I had no issues with the 4 of them. The wheel spacers lug nuts and the Factory ATV lug nuts all threaded on easily. Things to keep in mind: 1. You should use red loctite on the ATV threads to hold the wheel spacers on. Not needed on the wheel spacers lugs that hold the wheels on. 2. You should have a decent torque wrench. Torque the wheel spacers lug nuts and the ATV wheel lug nuts to factory specifications. On my CFMoto Cforce 600 that was 70-80Nm or 52-59 ft lbs. 3. Use the Wheel spacer supplied nuts to attach the wheel spacers to the ATV hubs. Use the ATV nuts to attach the wheels to the spacers. The ATV nuts might have a different shape to the cone part than the Wheel spacer nuts. And you want the nuts to sit properly on your wheels. With good tools it was a 20 minute job to put all 4 spacers on my ATV. It gives the ATV a wider stance for appearance and stableness. Widening an ATV 3 or 4 inches at the tires can make a huge improvement on off camber riding!!! It will throw a little more mud past the fenders though.

Great product but invest in better lug nuts for the spacers. The lug nuts supplied with the spacers lost there threads and the wheel came off still attached the the spacer. Used lock tight and righted correctly but maybe I got a bad batch or something but invest into better lug nuts. After getting back I started checking the other wheels and was about to fall off to. I have the same set on my other four wheeler and no issues.

Todo llegó en tiempo y excelentes condiciones lamentablemente yo me equivoqué en la.medida y tuve que devolverlo Pero es 100 % recomendable

Good quality.

Good quality and fit perfect on my 1998 big bear

Fit well on my 2016Yamaha Viking side-by-side. Don’t stick out too far, but gives it a good stance and doesn’t wander on paved roads. I’m happy.

Solo que los orificios que van a la masa del carro son muy pequeños por lo que tuve que comprar otros birlos, gasté mil doscientos pesos más.