VViViD 3M Clear Paint Protection Vinyl Film 12" Wide Choose Your Size Including Tools (12" x 6")

This is good stuff, a few bubbles appear the first day or two but go away. I had some scraps I used for device screen protection and it works better than anything I have purchased that was made for that.

Installed on RAV4 headlights with zero experience. No bubbles or peeling off so far.

Easy to apply on ebike to protect paint from panniers. Applied on seat stay. I was worried about applying on the rounded edges or rectangular seat stays. Not to worry went on nicely and its very hard to tell anything is applied.

I'm sure it's a fine product and works well with a proper installation, but I had no luck getting this to work right on my headlights. If you don't have the patience for doing things that are tedious and frustrating, this is not for you and I recommend having a professional install it. It would be easy to placed on lights that are mostly flat and rectangular, but modem car headlights with more complex shapes are significantly more challenging to wrap without getting several wrinkles and air pockets. My headlights have a sharp crease line in them that made it almost impossible to stretch over. Even with heat applied and numerous reapplications with wet film, it simply would not adhere smoothly and I had to give up. My headlights are also very large and took 99% of the roll to completely cover and even then the width is only barely wide enough for them - this leaves NO room for mistakes. And mistakes are easy when you're working with a giant curled up rectangle of adhesive vinyl... this stuff wants to curl and stick to itself constantly and it's hard to peel apart again. If you're working with huge pieces like I had to, I almost recommend having a second person to hold the other end of the sheet for you so it can stretch from all 4 corners. That might make applying it easier too. I don't want to knock the product itself too much because I can tell it's high quality vinyl. The parts that did stick properly were nice and clear and it was easy to squeegee out the moisture. I recommend buying a softer silicone or rubber squeegee though, as the provided plastic one seems really sharp. Overall, this is not a simple product to install if you have complex headlights. It takes a ton of patience, some handy skills, and extreme delicacy to do it right. I'm not really sure it's worth the frustration for a few years of protection that a good spray-on clear coat might be able to compete with.

good item for the price..good for edges were you want to protect against dirt or scratches..

I’ve order a lot of this stuff from Vvivid on Amazon over the years. The first thing I noticed when I opened the package is it felt lighter/thinner and no 3M printed on the paper backing. Just a sticker claiming to be 3M.Maybe 3M has changed their product and this is now what it is. I’m gonna still use it and I’ll change my review based on results. But it’s definitely thinner than the old stuff. Most of it is in the paper, but the film is a little thinner as well. See pics. The old Vvivid 3M is the bigger numbers (and you can see 3M on the backing).

I purchased this to supplement the purchase of another 3M paint protection vinyl product; a pre-cut body panel kit for a recently purchased 2017 dually pickup. The leading edge of dually fenders really get banged up with rocks, so I wanted the paint protected before I racked up too many miles. I used this 12" universal roll to fill in the gaps that the pre-cut kit didn't cover, including going all the way down to the bottom of the fender. To do a good job, this product requires a lot of patience, and the need to use home-made application mixtures per the instructions. I ended up with some bubbles, which is hard to avoid, but with a syringe, was able to remove the air pockets so the clear film would lay flat. After several hours of work, including thoroughly cleaning the surface, the final results are excellent. Virtually invisible, and will prevent the fenders from getting those ugly chips for a long time. This is a high quality product.

Unfortunately the roll of product I received had a masking tape material left attached and still taped onto the clear vinyl film from which I could only assume was the manufacturing and or sizing/cutting process which caused the product to yellow where the tape had not been removed prior to final packaging.I purchased this vinyl for vehicle use, so ultimately I ended up with clearly visible yellow streaks showing up in my installed clear layer of protective film. (Quality control issue.. as previous identical item purchase a couple years ago did not have this issue, so maybe only some rolls are affected).