Standalone Hard Drive Duplicator, External Dual Bay HDD/SSD Cloner/Copier, USB to SATA III Docking Station

Over the years, I have seen many product names come and go. So far, everything I have run across from this company StarTech has really been a good quality item for the price. You can find many other cloners and I am sure for a cheaper price, but the experience I have had with ST, i bought this one. - Good quality -- Nice and heavy for what looks to be plastic. - No issues, worked like a charm - Tested cloning a 250gb drive to a 500gb drive that was a standard boot mbr. Threw the clone in the machine and it booted up without issues. - Win7 self loaded a driver when hooked to the pc and the device then acts like a dock to access the drives via usb 3.0 - Easy to clone. Plug the source in the source slot HDD2 (yes, source is slot 2 in the one i received and i have no idea why they would do that. Logic would have you thinking to clone 1 to 2, not 2 to 1) and the destination disk into slot 1. Make sure the pc/copy button is red for copy and press the button. Wait some time and bam, it is done. Take note that this takes some time. This is not done by wiggling your nose and snapping your fingers. Your fingers will be broken by the time it is done. With 2 drives at 7200 spin SATA 3gbps, the 250gb drive was done in just under 40 minutes by my count. Throw a nice 2gb combo at the same speeds and you might want to just go eat dinner and watch a movie. Only one small thing that is becoming less of a big deal every day; IDE drives. No access to clone older IDE drives as this is for SATA only. At work, I have a lot of older pcs with IDE only. We are using every instance of trouble to simply upgrade pcs which all have SATA anyway but if i needed a quick access to a disk, it would be nice to have it here. There is an option priced on Amazon here at $18 or so that provides a dongle to fit right in this device, giving access to IDE. You need this option, a pair of these might be worth it or then find another option with this built in. Part of the reason i bought this one is that we use the StarTech 2 bay dock to access disks on the desk now as it is and enjoy the quality there as well. I bought this one for the office and may consider one for home with the option of cloning out a large windows drive that is simply ready. Good product and worth the money in my opinion. Update: 12/14/2015 - This device works great, but I did find one snag that most people will not run into, but I sure did; HPA partitions. What you do not see listed is that this will not copy a HPA partition. These partitions are used for older pcs that needed instructions on how to handle larger discs in regards to ATA and were also used for security purposes. If you are trying to clone a disk with one of these and it is the only hard drive left alive with a dead vendor, you are screwed. Now for the good news; StarTech rocks. I only took a survey and man, they were on top of things fast. Not only did they contact me to make sure my needs were fulfilled and why they were/were not, they made the whole situation right by making sure I got the right device that could do so. I offered to send this one back to compensate them back and they said "keep it, you might still use it". Class company that is certainly focusing on customer service and that says a lot of their character and how they do business.

This Startech HD duplicator (SDOCK2U33RE) worked well. (BTW,I have found all the Startech products I've used over the years are good quality.) I used it to clone a 4GB drive, a process that took about 7 hours. The cloned drive was perfect. And the process was easy once I understood how to do it. My one criticism is that I think the instructions could be made more clear and I do not understand why Startech doesn't have short video on their website that explains the process. It would have made it so much easier to get started and to understand how to use this device. Everything is very simple -- AFTER the first time you use it. Here are two things that I did not fully understand: 1. You cannot clone a drive unless the drive is REMOVED FROM THE COMPUTER. A computer is not involved in the cloning process. You just insert your old HD into slot 2 and your new drive into slot, push a button to get into the right mode (red light on) and then push "start." (Just to be clear: "Cloning" is a process to create an identical copy of your old HD. My computer had a drive that was getting flaky so I removed it, cloned it, and installed the new HD back into the computer and got back into Windows without any problems or blips.) 2. The unit can be connected to a computer to copy files -- but not to clone a drive. So, you can use it to backup files from your computer onto another HD -- which is a great feature. You should also note that while cloning, the drives got quite hot. I used a small desk fan to keep them cool. Not required but a good idea.

StarTech Standalone Hard Drive Duplicator worked for win 10 make sure the drive is bigger or the same size copied 450gb in like 5hr

I've owned StarTech hard drive docking stations for 10+ years and have yet to have one fail despite rigorous use. The only negative thing I can say about StarTech docks is that the single docks without fans run HOT. That's why, for as long as they've been available, I've used the models with built-in fans. I confess that I don't know how detrimental to a hard drive's longevity heat may be, but there's got to be a reason why computer cases are configured for air flow over the hard drives. This double dock/duplicator heats up hard drives even more than the single docks without fans do. I mean HOT boys and girls!! So hot that you cannot hold a drive that's been active in this dual dock in your bare hands! Seriously, you would need gloves to hold the drive in your hands. I really wanted to make use of this dual dock for the added video file storage to feed my Mypin media player so I experimented with several different USB mini fans and finally arrived in the pictured setup. The fan is a USB mini fan made by ARCTIC and is available here on Amazon. The fan is the quietest (virtually silent) and most well-built of the four different fans I tested. Unfortunately, the fan does not have a power switch so I connected it to a Tendak 4 port USB hub (also available on Amazon) that has power buttons for each of the four ports. My drives run only slightly above room temperature with this setup. Hope this was helpful.

OMG! This is it! FANTASTIC! I am so happy with this time saver! So simple, so fast! I hope they will make and sell an adapter that you can use to plug a usb flash/thumb drive into your computer to replace the hard drive.

Good product

Facil de usar,cumple con las especificaciones

- Pas besoin de formater au préalable le disque de destination au même format que le disque source ( GUID ou MBR ), le duplicateur s'en charge. C'est un duplicateur bit à bit, donc tous secteurs sont copiés, y compris ceux de démarrage et de partition. - La vitesse de duplication est conforme aux spécifications (Sata III 6 GB/sec) et le fonctionnement très simple à comprendre, même s'il n'y a pas de notice en français dans la boite. En mode UASP entre deux SSD, la vitesse est maximale (impressionnant !) - Toutes les connectiques sont livrées (câble USB 3.0 et e-Sata), et même les embouts d'alimentation européens et américains, bravo ! ------- Retour d'utilisation sous OS X (Mavericks): duplication d'un SSD de 250 Go avec 2 partitions(Yosemite et el Capitan) sur un SSD de 500 Go - Les partitions sont toutes parfaitement clonées, y compris les partitions EFI et de récupération d'OS X. MAIS, si vous clonez un disque de 250 Go sur un de 500 Go, il vous restera 250 Go non alloués sur votre nouveau disque, et vous devrez étendre la dernière partition (ou créer une nouvelle partition) avec l'application "Utilitaire de disque" d'OS X. ------ Retour d'utilisation sous Windows 7 intégrale: clonage d'un disque dur classique de 500 Go vers un SSD de 500 Go: - Les partitions sont toutes parfaitement clonées, y compris la partition de récupération HP. - Le SSD est reconnu et immédiatement démarrable après avoir été re-installé dans le PC. ---- Usage en mode "Dock": fonctionne normalement, tant sous OSX que Windows. Vitesse nominale avec les SSD puisque ce boitier est compatible UASP. - Un seul port e-Sata et USB 3.0, donc la bande passante sera partagée si vous connectez deux disques simultanément.

Very good duplicator, able to use stand-alone mode like the 5 way model.

Die StarTech.com SDOCK2U313R Dockingstation überzeugt durch eine konsequente technische Umsetzung und hohe Zuverlässigkeit im täglichen Einsatz an einem Linux-Server. 1. Hervorragende Chipsatz-Wahl (ASMedia ASM1352R): StarTech setzt hier auf den ASMedia ASM1352R Controller, was sich in der Praxis sofort auszahlt. Volle 10Gbps: Der Controller nutzt die USB 3.1 Gen 2 Bandbreite tatsächlich aus. Nativer UASP-Support: Das Gerät wird unter Linux sofort mit dem uas-Treiber eingebunden, was für optimale Performance und geringe CPU-Last sorgt. 2. Stabilität unter Linux: Viele USB-SATA-Bridges haben unter Linux mit Stabilitätsproblemen oder Kernel-Blacklists zu kämpfen. Diese Dockingstation hingegen läuft absolut stabil. Es gibt keine Verbindungsabbrüche, und die volle Geschwindigkeit steht dauerhaft zur Verfügung. 3. Standalone-Duplikator: Die Offline-Klon-Funktion ist ein extrem nützliches Feature. SSDs oder HDDs lassen sich ohne angeschlossenen Computer spiegeln, was Zeit spart und sehr zuverlässig funktioniert. Die Fortschrittsanzeige ist dabei klar und verständlich. Fazit: Wer eine Dockingstation sucht, die technisch auf dem aktuellen Stand ist und unter Linux ohne zusätzliche Konfiguration stabil läuft, wird hier fündig. Die Kombination aus echtem 10Gbps-Speed und der Duplikator-Funktion rechtfertigt den Preis absolut. Eine klare Empfehlung für alle, die Wert auf technische Integrität legen.

So far, I have only used this in copy mode. It made a complex job of repeated swapping and copying my boot drive using software into a simple one-step process. In response to other reviews, the manual is simple but that’s because the device operation is so simple - plug in the source and target drives, switch on, select copy mode and press start! It took 3hrs 15mins to replicate my 1Tb HDD on to a 2Tb SSD and a few minutes more with a partition manager to extend the boot partition to use the additional space. Maybe those who found the lack of instructions daunting might consider whether they have the necessary skills to handle precious disk drives! To me, this is a perfect solution for one-step disk replication that saved me hours of fiddling about in the back of my laptop. Update - I’ve now cloned my fourth drive. 1Tb Samsung 2.5” SFSE Momentus HHD laptop drives on to WD Blue 3D Nano SSD took 3.25 hours each. 2Tb WD 3.5” Black Enterprise HDD desktop drives on to the same WD Blue SSD took 4 hours each. Surprisingly, the 3.5” HDD drives generated the most heat so I took the precaution of keeping them cool with a fan. So far the clones have worked perfectly, albeit with a simple software partition adjustment to use the extra space for the laptop drives.