AsiaHorse Acrylic ARGB LED Strip for PC Case with 5V 3-pin ARGB LED and 4-pin Header, Compatible with Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync - 16inches

I purchase (2) of these lights. They have magnet through the full length of the light strip casing. You don't need any other adhesion whatsoever. And they are the perfect size for almost any case. The cable is the same length of the bar. In case someone needed to know that. A little WARNING though. The cable attaches to the light-bar and has no heat-shrink wrapped around it. The rest of the cable has cable sleeve, but they did not go all the way into the bar to protect the cable. I thought you should know about that. So tugging on it too strongly may have the cables pop out of the casing. Causing damage and headaches. So please be careful with handling the cable. Which will become a nightmare to fix. Basically be very careful as the cable is not securely attached to the bar and if you tug or pull it roughly you can ruin the light bar as the cable can break off the bar. That's just a little heads up warning. Other than that, its a great cosmetic led bar. The crystal diffused top looks really nice in person. Pictures do not do it justice. You can see the light bar on the right of the picture in my post. I am still upgrading my computer, so things may look a bit off. sorry 🤷‍♀️😋 And yes, that's a 1070Ti, still waiting for prices to drop on graphics cards. Been waiting for 3+ years. 😋

The 16" bar fit so perfectly lengthwise into my case it was *chef's kiss*. Just plugging the bar into an ARGB plug in my MB lit it up immediately on startup. It phases through rainbow colors by default and looks very nice. It was really easy to set up a color profile in Aura and we were off to the races. The "diamond" surface is really pretty and the entire thing looks very clean and sleek. It adds a nice glow to the bottom of my case. I LOVE the magnetic mounting. You can see the joins in the clear plastic segments on top, but it's minimal and you don't really notice it. Overall, I love it so far!

Easy to install with tough magnets. Could be brighter but i dont mind I dont nees a HID in my case. Diamond Light spreader does a nice job of getting the light throughout the computer. Very nice product would recomment. Just wait for sales.

Simple and works. Couldn't ask for more. I am using it on it's side, so I wish the magnetic strip was separate than you can add yourself. The crystal style look is unique and is what I was looking for in a design choice.

These are gorgeous, the crystal surface looks really nice and the magnets stick well. They come with adhesive if your case is aluminum. They are a bit pricey but worth it!

The LEDs in this array are not that bright at all. Looks great when on... however, just not something you would buy to light your case up. I believe if the left and right sides were transparent this could/would solve some of the dimness problems. As of right now, 4 side.. and only one emits light. The build of the light bar looks pretty good. However the black plastic end cap promptly fell off right after opening the box. All in all I was kinda left with a "meh.. " feeling after installing. I do not think this light is worth the price I paid.

According to the packaging, the cable is 500mm, which is nearly 20 inches. It doesn't seem quite THAT long, but then again I was always bad at eyeballing measurements. As with any new hardware, it's really best to turn off and unplug your PSU before you go plugging this in! The magnet seems to be just the right amount of strength: strong enough to keep the strip attached but not so strong that you can't easily remove or adjust it. As of this review this strip isn't formally recognized by SignalRgb, but that hardly matters because you can just add it in the program as a custom strip under "Devices." Check the LED count on the packaging first (you did save the box, right?); on the 5.6 inch model there's 8 LEDs. Then go to "Layouts" and resize, rotate, and position the strip as needed. For the 5.6 inch model (and probably all others), SignalRgb will consider the left side of the strip to be the side with the cable coming out of it. So, for example, if you've got the cable facing out to the right on your rig, you'll need to set the rotation to 180 to flip SignalRgb's virtual version upside down. Another review mentioned that removing the foil reflective strip inside the product makes the light brighter; that's true, but unfortunately it also makes the individual LEDs stick out like a sore thumb, at least in my case. With the strip intact, the lighting "blends" a bit better, though the individual LEDs are still visible. Personally, I prefer having the strip still on. It doesn't make the strip much dimmer than my other ARGB components. Your mileage may vary, but just keep in mind it'll be difficult to get that foil strip back on after removal!

im very sad i cant find these anymore they look great

Not a point to reject. Looks clear as in ad.”The reason of four star is that when it glows you may notice that it actually divides from middle due to Partition in its glass which makes it somehow looks cheaper.”

Macht ansich einen guten Eindruck, allerdings ist der Strip defekt gewesen. Habe es an mehreren Boards und Anschlüssen versucht.

Come da titolo, di per se inutilissima se non per fare bling bling. Il bling bling però è il suo forte, è luminosissima, con colori decisamente profondi e molto ben definiti. La plastica diamantata è molto gradevole come aspetto, e maschera perfettamente i led sottostanti evitando l'effetto "lucine di natale" che è per me fastidiosissimo. Attacco ARGB 5V standard, nulla da criticare, tenete conto che il cavo non è lunghissimo, quindi va previsto in fase di montaggio. Peccato per la copertura che, nonostante bellissima sia "spezzata" al centro, segno che il modulo da 280 che ho acquistato non è altro che un doppio 140 con il telaio allungato.

Quality is high, looks amazing and easy to set up, made my pc look so much better!

Molto molto bella essendo argb possiamo collegarla Direttamente sulla nostra motherboard e scegliere il colore, in dotazione invece c'è anche un cavo che sdoppia il connettore, ossia se abbiamo una sola uscita e magari è già occupata potreste collegarla lo stesso perché ha il connettore sia maschio che femmina per fare un eventuale"entra ed esci" con altri apparecchi