

💨 Illuminate your drive, dominate the fog!
The Siemid New Generation LED Fog Lights are a direct halogen replacement designed for Jeep and Dodge models (2002-2013). Featuring 55W high-power LEDs, waterproof construction, and a hyperboloid point focus lens, these fog lamps deliver a wide 130° beam with sharp cutoff for enhanced visibility in adverse weather. Easy to install using existing mounts, they upgrade both performance and style with a sleek black housing.
| ASIN | B08FZDNMC6 |
| Best Sellers Rank | #12,290 in Automotive ( See Top 100 in Automotive ) #30 in Automotive Replacement Fog Lamps |
| Brand | SIEMID |
| Bulb Type | LED |
| Customer Reviews | 4.5 4.5 out of 5 stars (1,580) |
| Date First Available | 5 September 2020 |
| Exterior | Machined |
| Item Weight | 260 g |
| Item model number | SMD-LED-FOG-FD |
| Manufacturer | Siemid Autolights |
| Manufacturer Part Number | SMD-LED-FOG-FD |
| OEM Part Number | 5182026AA |
| Position | Front |
| Product Dimensions | 0.01 x 0.01 x 10 cm; 260 g |
| Special Features | Waterproof |
| Wattage | 55 watts |
S**L
Amazing Lights
This product doesn’t fit the Jeep Commander properly. You could make it fit by fixing the new light holder inside of the factory light holder using screws. It works perfectly and makes the car look amazing.
N**R
Best bang for the buck
Great product for the price point. Amazing color at 6000k and great brightness.
A**G
Unadjustable & Low Powered
Paid extra to have it delivered the next day. After installing it, found these to have 2 major problems. Once it was fit, turned out it could not be adjusted. There is the adjuster but it’s rotating in its own and not making any change to the light angle. Second issues, once I took it to the road, found it to be much underpowered. The light is there but just for the sake of it, doesn’t really serve any purpose. Probably, if the adjusters would work it would throw the beam higher than where it is. Unfortunately cannot even return now since it’s installed on the car.
C**E
Se adaptan a Suzuki Swift 2020 rompiendo un pequeño nervio de la carcasa
B**.
Perfect fit for my 2018 Honda Ridgeline. Zero modification needed. Plug and play installation. Protips for installation: Remove the 3x 10mm bolts and 1 push-pin under the front bumper directly below the fog light. This will allow you to pull down the undercarriage panel and access the fog light. You WILL need a rachet thumb wheel if you go this installation route. I used this: "Powerbuilt 1/4-Inch Drive 2 in 1 Thumb Ratchet & Bits Driver, Finger Ratchet,Red,941248". Unplug the power connector and remove the 3 screws in the back of the fog light and voila. Replace with the Siemid fog for a perfect fit. Put the 3 screws in. Before you put the panel back in, compare the height of the new fog light while you still have the OEM fog on the other side to make sure they are of the same height. I didn't have to adjust anything, the new fog lights came already adjusted perfect. Both fogs are ambidextrous, not L and R as the Honda units. Plastic seems to be of decent quality. Black projector housing makes the truck looks a bit more modern. The performance of the fogs themselves are excellent. They are brighter than OEM fog lights + LED bulbs. The projectors completely eliminate the glare issue with the OEM fog, which was meant for halogen bulbs. The light color is around 5500-6000K, a little bluer than the OEM 4500 Kelvins. Zero flickering. The fogs won't affect the distance of the lighted part of the road, but it increase the width considerably. A replacement fog from Honda is $60 each. Adding in quality LED bulbs, at least another $50-150. For the price, nothing can beat the value of these Siemid fogs. I love these fogs and I would highly recommend them.
J**K
Bright and beautiful. Great light pattern. Works perfectly. I should have upgraded sooner! Fits Nissan Frontier.
E**O
Son excelentes tal y como los describen
S**E
I love these fog lamps. Finally replaced the OEM fog lamps that Jeep messed up so badly and wouldn’t take accountability for it. The OEM reflector literally melted. Every Renegade I’ve seen with the OEM fog lamps were messed up so badly. These SIEMID fog lamps installed easily into the same mounts as the OEM’s. Had to “Peel” off the fender liner for easier access and since I was also replacing the DRLs at the same time. I thought the fit would be off because of the difference in size vs the OEMs. But they fit well without any modifications. They definitely functions much better than OEMs. I think the brightness is perfect. The beam pattern is super sharp and very wide. No dashboard warning lights nor any flickering. The light colors matches on both sides. Didn’t have to adjust the beam as they were already perfect. Kind weird. But if you do need to adjust them, the adjustment is just like the OEMs. You have to feel your way into a hole under the bumper to the right of the fog lamps when facing it. It’s a PITA. Thank the Lord, I didn’t have to do it. Anyway, love these fog lamps. No error codes. No glare. No adjustments for me. Easy to install. Beautiful beam pattern. I just hope they last for a while.
Trustpilot
2 months ago
1 month ago