Siraya Tech Sculpt High-Temp Resistant 3D Printer Resin - Up to 180C, High Precision, Compatible with 8K DLP/LCD Printers for Engineering, Jewelry, & Industrial Applications (Dark Grey, 1kg)

Sculpt ultra is one of the most amazing resins I've used and really shows the trickle down of material science to consumer level printers. It barely absorbs any water or solvents and is incredibly rigid. It's very ceramic like in many ways, probably because it IS filled with ceramic particles. It's a bit difficult to print, bed needs to be leveled just right and more importantly, because the resin is so opaque, the z-height needs to be very small to not have bed adhesion issues. I had a ton of issues until I realized that was my problem. Whenever I level my bed, I then set the zero a couple steps down and everything is good. The prints come out very smooth and because it's so brittle, the supports come off the cleanest of any resin I've tried. It also means you can't drop your prints as it will shatter like glass. Highly recommend for specialized use cases where you need high chemical, wear and heat resistance.

Came very quickly products works as described but had to search through forums to get the best advice on how to use most effectively.. otherwise it’s a very strong resin and it’s use case is as described.. if you are making vulcanizes rubber molds I strongly recommend coating the model with a mineral oil. This helps prevent fracturing of the surface which can leave lines in the wax and gave my team our best finish.

Llevo años utilizando los productos de la marca sin problemas de producción.

I used the 80% Siraya Tech Sculpt High-Temp Resin with 20% white Tough Resin I had on hand to make new sockets for a tube preamp I am refurbishing. . I did some tests with 100% Sculpt but when I did my offline temperature tests, it withstood the heat but the thermal shock from getting hot and cold quickly caused the thin areas to crack. By mixing with some tough resin, I was able to make a part that has held up to the ~100C temps without cracking. The pictures show the before and after the the tube/socket replacement. I will definitely be using Siraya Tech Sculpt High-Temp resin for future projects. By the way, it printed flawlessly! (I use a heater inside the chamber set at 90F.)

Printed perfectly fine! Haven't had a chance to test the heat resistance yet. The parts are accurate and clean! One thing I did notice is the color isn't clear it's more of clear yellow, a very light yellow yet still yellow. I even mixed some with some abs like Grey I had laying around to see if it would help the heat resistance with that as well, gotta day had no issues printing the mix! Will buy again!

This is my fourth time using this resin. It's the only High Heat resistant resin that doesn't cost an arm and a leg to buy.There are other "Engineering" grade resins but they cost almost double the price. Not only that but those other resins come in proprietary containers meant to fit specific 3D resin printers.This Ultra White resin prints to very tight tolerances in my X1 printer. I'm presently working with lead casting. I'm working on perfecting my airgun pellet molds.These pellet molds still need some work to optimize my work flow but right now I can honestly say I'm on the right track by using this particular resin especially since I'm pouring into them some molten lead with temperatures of up to 750 degrees Fahrenheit.If not done properly the introduction of this amount of heat into my tiny pellet molds can and will ruin them in pretty short order. There is a set routine that must be followed not only for safety's sake but for successful cast as well.Be safe everyone.

Absolute garbage. Product says its supposed to hold up to 180 degrees Celsius. Broke at around 100 c

I got this resin in order to 3D print injection molds. Unfortunately, I feel that it is more trouble than it is worth for this purpose.I used the printing profile provided by Siraya Tech, but that does not guarantee successful prints. Printing molds, especially, requires strong supports with this resin, so take that into account. It took a few attempts to print molds with any degree of dimensional accuracy that wouldn't fall off the supports. But even then, there was still some warping in the molds, which is a problem when you're trying to make them flush with each other.But beyond that, this resin just doesn't seem to be strong enough to withstand injection molding heat and pressure without cracking, even after a good deal of curing. The molds that printed the best out of any that I made cracked after a single shot, even using aluminum frames for better support.I understand that some have had success with this resin, but honestly, I had better results using a very warped mold with no frames made using cheaper, water-washable resin than I did with this stuff. At least that one didn't crack after one use. It's not going to magically provide great results for injection molds, so understand that going in. It might be worth using for directly printing models, but be aware that it can be a royal pain to remove them from the build platform, even with rafts. In my experience, this stuff breaks before it bends. Aside from that, the surface quality seems nice.