MOJTBE 212CC Torque Converter CVT 3/4" Go Kart Clutch COMET TAV2 30-75 218353A Manco 12T #35 and 10T #40 41 420 Chain Driver Pulley Replacement Set - 30 Series

Works good plan on buying another one

Good torque converter setup. Very easy to n install would recommend for sure.

Gave it a 4 star because the hardware doesn't fit a predator 212 . Quick run to tsc and it works awesome. Buy a better belt the one supplied is cheap and will break after 20 minutes of use

Do yourself a favor and put a new crank in at the same time you are doing this upgrade. Two things to look for are thread size/pitch and shaft size. Typically a replacement crank is 5/16 × 24tpi. This kit provided an M8x1.25 metric drive pully bolt. Secondly if you think you have a coleman with a 5/8" snout and a 5/8 × 3/4" shaft adapter then you need to know this pulley isn't keyed. It has a cast keyed embossment to engage a 3/4" crank. I was able to modify a 3/16 key to catch the shaft adapter and make an assembly so I thought I would be ok... Here is your issue, drilling the crank is ok. 17/64 bit. Tap M8 x 1.25 completely destroyed broken of and ground down over and over again. Bought a second on and the harded crank surface was tougher than the tap. After 5 hours of work this assembly is functional and pride was involved so I will run the 5/8 crank and adapter until the next overhaul and then the crank will go in. 36$ for the crank would have been cheaper than 2 taps, a drill bit, 5/8 × 3/4 adapter, 3/16 keystock, m8 x 1.25 bolt and 5 hours of labor. Anyhow, very nice assembly though.

Exactly as subscribed and at a great price.