Self Cleaning Hot and Cold Water Bidet - Dual Nozzle (Male & Female) - Non-Electric Mechanical Bidet Toilet Attachment - with Temperature(BHCW01)

Let's face it, this is NOT the "all bells and whistles" "top of the line product" that you WILL end up wanting, but a rather affordable version which is also very easy to install, and that WILL convert you to use this system instead of smearing things around. This product however is an EXCELLENT entry level system that will help you getting acquainted with a different approach, and like I said, will have you want to upgrade to one with drying air function. For my particular install, my husband had a wall between our toilet and the source of hot water, and he had to drill to run the water line for hot water. The line is small, and what he did is he sharpened the edges of the line before running it through the holes which were made precisely to it's size. Once the line had these edges sharpened to allow easier pushing through, he use a piece of a wire hanger to find the holes on both ends, and then used a vice grip to hold the wire in place as he pushed the line on it to guide it to the hole on the opposite side of the wall, the holes didn't match on both sides, but the same piece of wire helped him drill a guide hole before enlarging just to the size of the line. Once the line was guided, he pulled the wire and the rest easily. The install turned up as clean as it gets. The hot water takes a long time to reach, and it even doesn't arrive all that hot, but the heater is in the opposite side of the house, and the water flow is small, so this is understandable. Other than having a preheated container feeding the line, or the water heated on demand, this is as good as it gets on the cheap, and it is good, more than good enough. The pressure of the water is adjustable obviously, and can be increased to your preference. My husband suffers from hemorrhoids and has been EXTREMELY happy with the system, I shouldn't say this but he claims he can even aim the jet and get a bit of an inside wash too! He is actually happier than me with this. Now he wants to get a version that requires electricity to include heated water on demand, and air drying functions too. Oh boy!!!

I own two electric, heated bidets. I am very please with them. I ordered this bidet for the half bathoom which doesn’t see much action. I ordered this model because it had hot water which is a must in the northeast. The install was straightforward and then I took it for a test ride... I was pleasantly surprised. With the exception of the unit not being eclectric it worked great. So much so that I can honestly say, if one of my more expensive bidets stop working I would replace it with this unit. It is well made, easy to install and at a great price. I recommend you turn on the hot water in the sink where the hot water line was install prior to using bidet. This way the line to the unit will be primed with warm water. Place the units hot water setting on the lowest setting prior to using and adjust your temperature. The one con I have is that my electric bidets will not work unless it senses your on the seat. A curious child can turn knob, get a shot in the face and run away leaving the water flowing. This con isn't enough for me to rate it anything other than a 5 star, great product.

Before buying this bidet, I had already bought and installed a no-frills bidet (single nozzle, single knob, cold water only) that I was happy with. So I decided to install another one in my downstairs bathroom. My downstairs toilet is right next to the sink so I figured, "hey, why not install one that will tie into the hot water of the sink?". So I settled on this bidet, and in doing so, I also got the dual nozzle. The install process was not quite as easy as my first bidet. I found the written instructions a bit unclear but just looking at the pictures/diagrams gave me enough information to finish it. Having to tap into the hot water line under my sink complicated things, although I eventually got that down. I didn't like their insistence in replacing the hose that connects with the toilet tank, which was a VERY awkward replacement that took several tries to get water tight (seems totally unnecessary too, as my first bidet only required putting a splitter at the incoming cold water knob, without touching the line that goes to the toilet tank). Like any add-on bidet, it raised the height of the back of the toilet seat, however NO toilet bumpers were included to even the height of the seat, so I had to spend another $7 to order some from Amazon. The bidet works as expected, but one annoyance I have with it is that the first knob (to select "spray type") has WAY too many "degrees of click" (TWELVE, I counted), even though it actually only has 3 choices: Regular Wash, Women's Wash, and Nozzle Wash. In other words, you turn the dial, hear click-click-click, and then finally on the 4th click it actually changes the setting. None of the inbetween clicks seem to do anything, I think it's probably because they just re-used a dial for something with more settings. After all that, I didn't actually find the addition of hot water to be all that useful. My first bidet got me used to using cold water, and in order to actually get warm water, I have to run the Nozzle Wash setting at full blast for a good 10-20 seconds, which just seems wasteful. My wife tried the "women's wash" and said it didn't seem any different from the regular wash. Overall this bidet does what it sets out to do, but unless you really want that warm water (and are OK with running the nozzle 10-20 seconds before hand to get it every time), I would just stick with a simple cold water bidet.

Tried a Toto toliet in a hotel, but can't afford the price tag. This is a happy medium product that will do the job with hot and cold water with the same results. Very pleased and fits nice on existing elongated bowl toilet. Pro Tip: if you can't reach a sink to supply hotwater line , just buy a cheap ice maker fridge h20 kit with a needle valve set up and use it to pierce the copper hot water line. The ice maker 1/4" line will fit very tightly into the mfg included white hot water supply line. Secure with a small hose clamp. Total cost $10. You will also now have a hot water shut off valve with the ice maker kit. Saves a lot of time and makes set up easy and cheap where you dont have easy access to a hot water line andwithout a plumber or water lines running all over your bathroom! Enjoy!

This Bidet is the Best Thing Ever!!! I Recommend Everyone have a Bidet and this one works Perfect. Strong and Sturdy when using the Dials. Super easy to install all fittings are put on hand tight. 5 minutes and we had it installed and working great. You really do feel Clean and Fresh and use WAY Less Tissue. Thank you for a Great Working Bidet

Love this thing. I don't understand how people have had some much problem with leaking. I have 2 of these and I installed both of them the same day and no leaks in either of them. We have been using them for a couple months now and they work great. I find they don't save a lot of bathroom tissue as you still have to dry yourself but it sure is easier on the backside. No paper scratching or burning your delicates because of wood fiber or the bleach to turn the paper white. Don't know how we did without them.

I’ve used it for a while now before I do a proper review. The hose and parts included was everything I needed. Easy installation. No leaks after months of usage, highly recommended.

The product has really disappointed me. The nozzels have broken, there is a constant leak and there are big cracks on the nozzle pannel.

It's my 3rd bidet. After some use the middle walve which controls the water pressure loses it performance. My first lost its pressure and the 2nd lost pressure and also started leaking in the toilet. I still like it's performance as long as it works perfectly not losing the pressure. I wonder why it's loses pressure after few months of use ???. If that middle part is available to purchase extra , I will be happy to buy and replace it.