Buyers Products WJ202 Truck and Trailer Rubber Hood Latch, Regular

Perfect replace on my 2012 keystone cougarGreat quality and a really good price

Works

great item

Item was exactly as described. Worked perfect with a little engineering to the application I was using it for. I used bolts to secure the hinge to the cargo box I was putting them on, because like others say, these don't have much stretch to them, so I wanted to be sure I wasn't going to rip them out easily by using small little screws. Great price as well. Very happy.

The 2 holes for mounting the swivel mount are too close to the side of mount for a decent size screw to fit in. I had to drill the hole closer to the center of the mount so that the screws would fit.

Just what I needed!

Perfect. Just fixed my Coleman Coolbox cooler.If you own the Coleman Coolbox Cooler/Radio/CD these are the replacement latches that you need. These are stronger than the original and have a smaller tee on the handle. Since your cooler is mounted with one screw just use the rubber latch by it self with the pin/washer and cotter pin that come with the parts bag. All you have to do is cut the old pin off your cooler latch using a hack saw or Dremel cutoff disk. Remove the new Tee and retainer pin from the new latch. It is held in with a cotter pin or apart inside the zip lock bag. Slide the pin through the cooler bracket and the new latch. Install the washer on the outside of the pin and attach the cotter pin. Now bend the cotter pin to retain it on the latch. You can also replace the new latch pin/cotter pin with a screw pin or a screw with acorn nut available at you local ACE hardware that will eliminate the cotter pin that catches on clothing.

Product is as advertised and was the right size to replace the cracked rubbers on my trailer. I only needed the rubber parts since my hardware was fine. It was the same product as what was on my 2014 Keystone Cougar camp trailer. Make sure you are getting the correct length because you are not going to stretch this material beyond the length is was made to fit. The rubber is very strong and hard for me to pull far enough to fit the front clip even though it is exactly the same unstretched length as the original. Worked for me.