5.25inch To 5X 3.5 Stainless Steel Hard Drive Cage with Fan Space, Hard Drive Cage Adapter Rack Bracket(silver)

I am not normally someone who leaves feedback, (too lazy), but I thought I would for this cage. Surprisingly hard to find item, and this one fits the bill perfectly. Was a little tricky to figure out initial assembly, but once you sort out the sides and orientation it went together really easily. Very solid when fully assembled. I was genuinely really impressed with the build quality, I was expecting something flimsy, but this is quite sturdy, even with no drives in it. Top marks to manufacturer, (very limited sharp edges too, which is not always the case with computer innards, so good attention to detail). Would recommend this for anyone who needs to add a few old drives to a big case.

Stirdy, easy to put together, takes up not much room. Has everything you need. Perfect

Currently builting a NAS server, this gets my drive count from 5+2 to 10+2 (HDD+SSD). Built little bit tricky but it's like an 8+ macano difficulty. Drives are bit tight to push in and out. I used a daul 2.5 brack to mount some SSDs, this was needed some strength to get pushed in. Very tempted to buy another to build a couple basic nas with a raspberry pie in it.

Bought this to fit into a dell poweredge t430. Afyer abit of trial and error i got it to fit. The front mesh is a bit tight so you have to be careful getting it in and out so as not to warp it. I fitted a 140mm fan inside the mesh to keep the dives cool. For to price I am happy with it.

This does not fit an Antec case because it leaves about 15mm gap on each left / right sides. That also means there is nothing to secure to on either side. I have another 5.25 bracket and some space either on top of bottom of this cage to go into the case; however, there was only one screw hole on this case that matches up with the 5.25 bracket. I have ordered another cage which sits into 2x5.25 space and that works for me, though instead of 5 x 3.5 HDD, that only gives me 3 x 3.5 HDD which is my absolute minimum. What will I do with this cage? It looks a good candidate for my Raspberry pi 5. Back to this cage, all the parts seem to work well including the HD rails. There is space to fit a 120mm fan. I consider this a 5 star but there will be many use cases that would not fit, so, a 4 star.

Sturdier than expected but supplied the wrong screws (m3) for 3.5" drives.

Excellent for mounting 4 LaCie Rugged Mini, 2.5'", Portable External Hard Drives It’s the only enclosure I’ve found that stacks these Rugged Drives

Fairly easy to build, instruction could be clearer about the screws but maybe I'm just an idiot for not noticing the amount of the screws.