(1-1/4''|32mm) Heavy Duty Carbide Hole Saw with 2 Pilot Drill Bits, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic

Used this to cut through the steel body of my van. I ran the hose to dribble water on the area while drilling. Slow and low speed did the trick.I later used it on some sheet aluminum and it was still sharp and worked even easier. Totally worth the money. I drilled my own pilot hole and the one that came with the bit worked well.

I bought this to drill a hole in 20 gauge stainless steel. It cut great. This may not be the longest lasting bit, but pro bits for this type of cutting are over 4 times the price. I needed to make one hole, and it did it surprisingly well and fast. Since others noted that the pilot bit can snap, I drilled the pilot hole with a separate bit. That took awhile. But when I switched to using this for the large hole, it cut fast. Make sure to use cutting oil, and go slow. I could easily see the shards and honestly it felt like I was cutting aluminum.

I’m not sure why this design is so much better than other designs of other holesaw but this one really cut a hole through the wood and metal. They’re really very awesome.

I use these hole saws for cutting through metal doors, the hole saw itself cuts great! However, the pilot bit that comes with them break very easily. One other factor is that the hole saw has a rim around the outside diameter that stops you from going the hole way through the door.

Only had to make 4 fishmouth cuts on some heavy wall square tube. Couldn't see paying a lot more money for something I was only going to use once, so I tried this brand. Worked great and it's just as sharp as when I took it out of the package

When it came in, it’s nicely packaged has a nice little carrying box and assembles pretty easily, but the one problem is that the drillbit sucks. It snaps right away, but the hole saw itself is actually really good. All I had to do was take one of my Mac tools drillbits. and put it in the hole saw and try to tighten it down without stretching the threads on the lock screw and continue the cut, but the only problem with that is because it doesn’t have the flat spot on the drillbit like the hole saw but had you have to keep tightening it down but on the plus side you can get at least 2 to 3 full cuts with using a Snap on or Mac tools or high-quality drillbit and guess what if it breaks lifetime warranty on Mac tools drillbits, so breaking one isn’t that big of a problem I am giving this tool a three star because the drillbit snapped right away but the saw portion is actually decent quality. I don’t know how long it will actually last but drilling through a bumper. It worked really well if it was just the saw I would give this a five star and it’s packaged decently, so if you’re looking for a cheap decent hole saw this would definitely be one of my first picks but if you’re looking for something more long-term, I would definitely look into a better company with higher quality tools, but for a couple time use and possibly maybe only being used once a year or a couple times a year then this is definitely the product for you, but if you’re using it daily weekly or monthly definitely buy from someone else and I would recommend tools because of the warranty Snap on doesn’t really have the warranty backing their drillbits or heavily worn tools Mac tools is just a better option all around and if you don’t have a MacTools dealer and I would recommend googling for better options for you and what you do for a living or hobby’s Buy for side projects this isn’t that bad

Just wanted to make a 35mm hole in my kitchen stainless steal sink for a hot/cold control valve but was worried about such a low price. Decided to give it a shot, despite the other reviews. Well it went right thru like butter. I didn't use any oil or water, just high speed at a medium pressure and a little rotating side to side motion instead of a steady straight down pressure. Chewed right through the stainless steel in less than a minute. The bit was a little hot, which is normal, but nothing that would've required oil. Well worth the price, even if I'll never use it again for years.

Update - 6/15/24The seller reached out to me after my review and apologized for the quality of the product. He acknowledged they had some quality issues and were addressing them. He offered me a 100% refund of my purchase. For this level of professionalism and customer service I am raising my rating from 1 to 3. The seller did not request me to update my review or put any stipulations on my refund.I should have known. Get what you pay for, in this case not even then. I bought to drill holes in 55 gallon metal drums. Thin sheet metal! First hole took forever to drill. Second hole the center bit broke and three carbide teeth broke off the hole saw. What a waste of money.

entrega rapido y buena calidad

I use it as a "Reem" to finish drilling a , 4"+ hole, seven inches deep into tree stems that are then turned into lights with different carvings.The drill cuts quickly, leaving a very good surface.

Provata il giorno stesso su una lamiera da 6 mm, con un trapano a colonna, velocità bassa ed olio da taglio abbondante. Foro perfetto e scarto di taglio anch'esso perfetto che ho riutilizzato per un altro lavoro, pulendo un minimo di sbavatura. C'è voluto il tempo necessario per fare un buon lavoro e non "bruciare" i denti della fresa, e comunque ne è valsa la pena

Je l'ai utilisé pour percer un évier en résine, sans problème. Super dans de la fine tôle, dans des plaques de mélaminés, contreplaqués, PVC, etc. Auparavant j'utilisai des scies cloches onéreuses pour métal mais elle ne faisaient pas long feus. Cette cloche n'est pas faite pour le béton, la brique, etc. J'en suis super content et même après des dizaines de perçages elle coupe toujours aussi bien

Grait drills