Chemical Guys Gap_VKIT_04 V Line Polish and Compound Sample Kit for Light to Heavy Swirls & Scratches (Safe for Cars, Trucks, SUVs, RVs, Motorcycles & More ) 4 - 4 fl oz Items

Works great. The pictures say it all. I was blown away.

About 6 months after I got a new truck I took it off-roading, rolling down narrow trails for about 8 hours. Branches often scrapped the sides of the truck leaving hundreds of superficial scratches. Fortunately, nothing that wouldn't buff out. I had some MacG*****, you know the product. I had enough to do one side of the truck. Worked my way through 4 different "grits". It took a couple hours+ but it removed most of the scratches. I wanted to try out this product so I bought the 4 pack and used it to do the other side of the truck. Chemical Guys recommended using the lightest grit first to reduce how much paint gets removed. Okay, I tried it. One pass removed 90% of the scratches. Second pass, they were 99% removed. Doing the whole side of the truck took a half hour or so and left the truck much more shiny than the other side. I was really impressed. It was a little harder to wipe off than the other product but worked so much better it more than made up for the time. I didn't intend this to be a side-by-side comparison, I just wanted the scratches out of my truck's paint. Running out of product halfway just made it work out to be exactly that, a side by side comparison. I found it works much better than the other stuff. The most aggressive grit is quite aggressive, you may not need to buy the 4 pack, you might just get by with the least 1 or 2 aggressive levels depending on what you're buffing out.I also do woodworking, I turn pens on a lathe for fun and profit and I use this product to shine up CA glue finish and resin castings. I had similar results to my experience with the truck. It worked so much better than the McG product. It really reduced my sanding time. I used to go through all the micro-mesh pads then use McG, now I sand to 600 and just use the Chemical Guys product, done!I will absolutely be buying this again. Funny thing, it's easier to buy on Amazon than the Chemical Guys website. They'd been out for months when i thought to check Amazon and was surprised to find it available.So, bottom line, this is a really good product and well worth the extra money. You may not need such an aggressive grit though so you might consider just getting the lightest grit first and trying it out. Good luck and happy buffing.

Great serviceTimely deliveryGood product

I've been using these four polishes for quite a while now. I've always been happy with the results, but I find that I end up using the red and orange (cutting compound and finish polish) most of the time. I rarely use the hybrid polish (green label), because I don't need a step between the cutting compound and the finish polish. And I use the extreme cutting compound on occasion when there's some really nasty oxidation and I want to get through it with a first pass before resuming my usual polishing regime.In a lot of cases, I also find myself finishing vehicles with a finer polish (Rupes UNO Pure has been a favorite). This means that I went through at least three stages of polishing, and finished with a product outside this lineup for a better end result. This is why the title of my review says it's neither the best results nor the fastest.

Used this set in combination with Chemical Guy's clay-bar kit, and WOW. 14+ years of dirt and swirls came right out. I've never done more than just a simple hose-down and sponge-scrub on any of my vehicles, but this stuff was easy to use and beat my expectations.Started by giving the bike a wash with the Clean Slate wash from the clay-bar kit, then went over it with the claybar (which is the point where the before pic was taken). Then proceeded through each of the 4 polishing compounds in this kit with a cheap set of 3in polishing pads and my corded drill. Dabbed it on and started slow to spread it, then a few passes a bit faster, one final pass at top speed, then wiped off the residue with a microfiber towel. Then grabbed a fresh pad and repeated with the next compound... After all the polishing, I applied the Butter Wax from the clay-bar kit and gave one final buffing by hand to get the after shot.For my motorcycle, this set had more than enough compound to do the whole bike several times over, but I imagine it'd be cutting it pretty close trying to do a whole car. And that said, it feels a little pricey for such small bottles... But this kind of paint correction shouldn't have to be done too often, so after seeing the difference, it's definitely worth it!

I am happy with this purchase. I used it to buff out a faded vehicle and it worked great and a little went a long way. Thanks for a great product. I would but it again if I need it. I believe the bottles will last a long time. Thanks.

Este producto cumplió mis expectativas, lo recomiendo

Me gusta esta muy bueno se los recomiendo 😎