Stainless Manifold Header w/Gasket Fits Suzuki Samurai & Geo Tracker 1.3L 1.6L L4

This header was an exact fit and arrived quickly it was pretty easy to install .The gasket doesn’t have the plug flange covers so it makes it easier to get to them .The lower collector flange does tilt towards the passenger side a bit so you will need to get an angled connector to go straight back .The provided collector does need to sit on the outside so it will need to be welded on to that piece before installation to the exhaust itself .I found it to be just as nice if not nicer so far anyway then my old Thorly header @ 5x the cost at the big branded Sami sites ..

Had to do some rigging but it worked out! 1987 Suzuki samurai.

Great constriction, easy bolt up. Make sure you surface the mounting flange on the engine side. Mine was in no way flat from warping in construction. Cylinder 3 was about 3/16" out of flat.

This is perfect for the 8v trackkick. Much better than the broken piece of cast that these things seem to all have. A bit of modification required but well worth it. I also recommend using the original gasket, as it has the heat shields for the spark plugs. You can find them new, I just kept the old.

I like the header except the weld leaks on cylinder 3 at the head flange. Tunerbits will not send a replacement prior to receiving the defective one. If the complete exhaust system hadn't been done I could use the oem manifold and send it back. It wasn't till the complete exhaust was installed at the muffler shop that we found the leaking welds. I have substantially more in the exhaust than the header and I do not want to spend more to modify the exhaust to put the oem manifold back on. I find tunerbits customer service skills lacking and self centered.Update!! The seller sent me another header and no leaks and works fabulous. Thanks TunerBits!!! This seller is Fast to respond to issues and works hard to resolve them. I truly appreciate sellers with this business mantra!! I will purchase from them again when I need another header.

This does not fit my 1995 tracker . Before you buy do not believe amazon when they say it fits , check your bolt pattern first . Because it will cost you to return among other things

I ordered this header for my 1988 Suzuki samurai because I wanted to replace my ugly old stock header, installation was pretty straight forward the only problem I have is that one of the exhaust tubes on the header is just barely touching the engine mount braket that's on the frame, I tried to grind it down a little but it didn't help much, so at the moment it is still just barely touching the frame, I'm not sure if it's something wrong with the header or something wrong with the frame on my samurai. Other than that issue the header sounds great, and I really like the stainless steel.

wooked good ac line had to be bent