🛻 Spray on toughness, drive with confidence!
HERCULINER Aerosol Spray Truck Bed Liner is a 15-ounce textured black spray can designed to protect all truck beds and exterior parts from scratches, rust, and fading. Covering 6-7 square feet per can, it’s ideal for touch-ups, cut-ins, and versatile applications like bumpers and wheel wells. Made in the USA by PEAK/HERCULNR, it offers professional-grade durability in a compact, easy-to-use aerosol format.
Manufacturer | PEAK/HERCLNR |
Brand | HERCULINER |
Model | HALB15 |
Item Weight | 1.3 pounds |
Product Dimensions | 2.7 x 2.7 x 9.6 inches |
Country of Origin | USA |
Item model number | HALB15 |
Is Discontinued By Manufacturer | No |
Manufacturer Part Number | HALB15 |
B**Y
Herculiner Aerosol Spray Truck Bed Liner - Fantastic Results on My 2004 Tundra and 2007 Pilot
I used the Herculiner Aerosol Spray Truck Bed Liner on both my 2004 red Toyota Tundra and 2007 black Honda Pilot, both of which had faded paint and big scratches from 20 years of use. The process did take some time, especially to sand down and clean the areas thoroughly and apply masking tape, but the actual painting was quick and easy. For my red Tundra, just one coat was enough to completely transform the look.The texture of the paint is great, and once it dried, it looked fantastic—better than the original finish, in my opinion. The anti-scratch formula provides a durable, protective layer, and my cars look so much better. I don’t feel bad anymore driving around in my older vehicles. This product really brought new life to my cars, and I highly recommend it for anyone with faded or scratched paint. In my experience, Herculiner is one of the best brands out there for this type of job!
R**
Great
Worked great, good value and is easy to put on, the smell is horrid so wear a mask obviously. I haven’t been able to test out its durability and quality yet but so far it looks great! Got it so I can restore my dads old work truck
M**S
Nice finish!
I bought this to compare to the rest oleum brand and l like how this has a semi gloss finish to it and is made by JB Weld. All in all it’s a good finish to it and will have to see how long it’ll last before it breaks down over time. I used it on a set of 4 go kart rims and very happy with the results. I think l may of switched to this brand now after using it.
S**X
Great stuff if you use it properly
Miracle in a CanThis stuff is powerful—seriously. Unlike most spray paints that recommend a 6–12 inch distance from the surface, you’ll want to stand at least 12–18 inches away for best results. The spray is strong and concentrated, so misting from a bit farther out gives you much more control.For the cleanest application, use light, even coats, moving the can in all directions—up, down, and across. It builds a beautiful, even texture when applied patiently. Heavier spots may level out as they dry, but if it starts to drip, you’re likely stuck with it—so go slow and steady.A crucial tip: use painter’s plastic and tape to mask off surrounding areas. The overspray is intense, and once it lands, it’s extremely difficult to remove—from surfaces and skin. Don’t skip this step—you’ll thank yourself later.
F**2
Used on steel step-ups with great results…
Worked great for step-ups that were starting to fade and had spots of rust. I used wire brushes to touch up the rusty spots, used light sandpaper on the rest, and then wiped down the metal with a wet shop rag and then evenly sprayed on Herculiner, top and bottom of rails. Decided to use Herculiner for the metal backplate for front grille badge as well. The red paint on the logo is Krylon Fusion for anyone wondering. Will be using Herculiner on the wife’s step-up's as well. Prep work helps a bunch, but ease of use was great, in my book. Would definitely recommend!
R**R
Good DIY project.
Form, Fit and Function:- Cost effective way to repair or install a spare on liner.- Protects the bed or tailgate from damage.- Rattle can makes applying the bed liner easier and less messy if used per the instructions. No rollers or brushes needed.- Cleanup is easy with the proper prep and rapid response to runs or overstay.- Rapid application by can especially when you prep the area for application and protection from overspray.Recommend wearing eye pro and gloves to apply thr product. Tape off and cover areas you do not want sprayed or to have overstay on. Have some shop towels handy to clean up runs or overstay. Allow to dry fully prior to using the surface that has been protected.
J**R
Tried the roll on but spray is better
73” icon toolbox stainless topper. Love JB weld products so I originally tried the roll on quart. Really thick, very dense rough looking outcome. Scraped it off and went with the spray approach. Perfection! Prep is key. Sanded with 80 grit , acetone and 2 cans. Very light coats (11 total coatings).
H**H
Texture
Works decently well. It's kinda cheap and not as tough as it advertises. Thought it would be thicker but, it's more similar to a matte paint with grit in it.
Trustpilot
2 months ago
3 days ago