Magnetic Paint for Walls, Bedroom, Office, Kitchen, Playroom, Classroom, DIY and Renovation - 0.5 litre - 1sqm Coverage

Excellent product. Makes a wall magnetic very quickly and effectively. Some tips and observations from experience: - Needs 3-4 coats to be properly magnetic. - VERY thick paint like painting on cottage cheese, needs to be on thick so doesn't stretch. - 0.5l covered ~1.5sq m of wall with only 2coats so had to gework second can. - Leaves a textured surface and shows brush strokes. - - Matt grey finish is nice and it's easy to do a single coat of regular blackboard paint to make a blackboard but wouldn't fancy it under regular emulsion without sanding. - NEEDS SERIOUS MIXING ideally with a paint shaker (I took my cans to local b&q at a quiet time and asked them to put on shaker, once upside down once right way up and was fine) - weighs a LOT hence mixing need the 0.5l can feels like it weighs about as much as 2.5l of emulsion! Lots of metal filings (I guess) in suspension hence needs serious shaking. - We got the lovely Tidlo wooden letters and numbers and they stick well. - also got the Sigel magnets which are super strong and work well to hold up paper or photos but needs to be that strength to use as notice board.

Works as described in terms of coverage, you have to give it two coats and there was just about enough. It does add a little thickness and texture to the surface you paint so if it's a section of wall you then paint over again it will appear slightly different (pitted) and raised from the rest of it but it's not surprising. After that, you can use magnetic photo/inkjet paper for example to print out your pictures (or shapes/words/other) and bung them up on a wall, makes it easy to change them and or move them around. Fridge magnets also work, it helps to spread the load out for example rather than a larger item and a small magnetic point/surface magnetic paper works well.

Does what it says on the tin! Very thick paint which can be hard to apply - similar to gloss, maybe slightly thicker. Make sure to thoroughly mix before applying each coat. It is a bit on the expensive side for paint, but then again this is a unique paint! It gives a different texture to the wall/surface it is applied to but can be lightly sanded to give a slightly smoother surface. Worked well for my application, I would recommend it.

Magnetic not working, can't hold small item

yes its thick, some people dont understand this its full of metal bits you have to mix it rather like anti climb paint. mix it and mix it while you are using it it aint hard, it works great done 5 coats on the door so used the whole tin. the tin had a dent in but who cares its in the tin that matters brilliant service all round many thx, please dont expect it to go on like normal paint but it work brilliant

i've gotten magnetic paint before. This was a tiny amount and poor quality. it doesn't go on smooth - even accounting for the iron particles. The magnetic chalkboard paint i've gotten is much better. this was gloppy and required several coats for the same effect. what's worse is that no matter how many days it dried for, as soon as i tried to paint over it, as it said you could, it completely peeled. total disaster and waste of money and time

as many others have commented the paint gets very grainy and is not easy to paint nicely. The recommended magnets do stick nicely on it

An 'it's okay' star rating is, perhaps, slightly unfair, as it does what it says it will and the result is fine - if rather rough. And that's the slight downside. I put on three layers and was happy that the magnetism of the surface was efficient - you need to do a lot of stirring to ensure all the iron filings are dispersed throughout the liquid before attempting to use it - but, of course, the very nature of applying iron filings to a smooth, flat surface will inevitably result in a course, rough surface when finished - and I was loathe to sand it too much between layers, as it's the filings that fall away! Afterwards, I had to prime it with white and then paint two or three layers of the coloured paint to cover the dark, grey colour of the magnetic paint, and the result is pretty textured, but it looks good with all the magnetic letters and numbers on it! It works, and I'm happy with it. When applying, stir REALLY well and be prepared for your little foam roller to get very heavy, as it fills up with paint containing metal. It dries pretty quickly, so don't hang around - finish each layer before having a pause.

The magnetic strength of the paint is decent, but dark color requires you to put multiple coats of white primer up on top, reducing the strength. We bought this twice and both times it came in a flimsy box with one layer of bubble wrap. The box had hole on the outside. The first time one of the paint cans was broken open and we have yet to receive a replacement from MagPaint.

Par précaution j’avais acheté de la poudre de fer a mélangé dans le pot et je ne suis pas déçu

Ho ricevuto il prodotto. Il pacco era ok ma all'interno non c'era nessuna spiegazione su come usare il prodotto. L'ho trattata come una normale vernice, diluendola come indicato sulla confezione. Ho scritto sulla parete con dei normali gessi il giorno dopo, quando sono andata a cancellare il gesso, la pittura di è "consumata". Solo dopo mi sono andata a vedere dei video su YouTube e consigliano di scriverci solo 8 giorni dopo.... Sono rimasta delusa perché ora la mia vernice è rovinata e così rimarrá... Bastava solo mettere delle indicazioni nella confezione.

Assolutamente non adatto a calamite tipo quelle che si portano a casa dopo un viaggio. Dopo le 4 mani date come da istruzioni non mantiene nemmeno lontanamente attaccate le calamite. Adatto solo a quei magneti tipo fotografie leggere. Avviato reso del prodotto

Mise au petit rouleau a laquer peinture diluée un a l'eau ,toujours bien remuer . belle finition en 3 couches et magnétique sur tableau plastique pour pose de Magnets . Bien dans l'ensemble.