VELIMAX Static Cling Total Blackout Window Film Privacy Room Darkening Window Tint Black Window Cover 100% Light Blocking No Glue (17.7 x 78.7 inches)

Works great, wish I had found it sooner! Nice and thick, completely blocks light and easy to install.

Very good product. Complete black out and easy to install.

UPDATE : So static clang is never going to be good enough for these applications but it helps. It certainly helps to align. It certainly helps to install. It's just that they won't stay in place! So there's a very very simple solution and I mean that literally! Just take a little sugar water honey diluted in water or molasses of any kind. Also diluted in water by about half or more and you can either spray the window using a sprayer or you can apply it with a brush just in areas where it's actually peeling! This works because it's naturally super sticky as you know from handling these jars for years- and it's also easy to remove with just plain water or a wet towel when the time comes. So if you've got a peeling corner just dab it on. You can use a paper towel, dab it on it or dab it on the back of the shade. So other than being a little too narrow and a little too overpriced for The wider roll, this is actually pretty good stuff for direct application to the inside of Windows in cars, Vans, and any other kind of camper! About. The only other thing I can say is that it needs to be longer and I think I did get shorted four feet by the time I got to the end of the roll. You may want to start by The roll before you start cutting ! I may have to return this even though it's cut into little pieces. It was I believe 4 ft short and I don't think it's going to last the month. As far as reusability goes for the purpose indicated. I'm going to give it another shot here. I'll try spraying the inside of the Windows in question with some soapy water to add some stick and if that does the trick then I'll be happy.

This is completely room darkening, blackout. The backing is a little difficult to get off, but I found if you use an exacto knife and hold it almost parallel with the back side of the static cling and just poke it through the backing and make a little slit towards the outside of the corner you can easily get ahold of the backing to peel it away. I used scissors to cut the static cling just about 1/2 inch more than I needed on both top and side. Then use a spray bottle with water and a few drops of liquid soap (mixed up well) to really wet the window surface and the back of the static cling. Put it in place and you can slide it around a little bit to get it in the exact position you need then use a squeegee (or credit card) to squeeze out the extra water and get a good seal to the window. Lastly I used an exacto knife and a ruler to trim the edges and get a perfect with a nice straight line. Easy to install, works perfect and looks beautiful! The outside (or side you would be seeing on the inside of your house) is a matte finish black with almost a slight sand paper type feel to it. The side you would be seeing from outside your house is a shiny black appearance and if you don't spend enough time with the squeegee to get all the water and air pushed out then you would see water/air bubbles from this side as well.

This worked great to black out our windows for our daughter's bedroom. Really helped her sleep in a room with 4 sets of windows. Note: Does come off easily and can be reapplied.

It started coming down after about a couple of months

Very easy to work with unlike some others I have tried. I put it over a broken window and it worked beautifully. You can't see through it so therefore I don't have a broken window!

I have used static cling for window privacy for years. I recently needed a light blocker because of aluminum blinds reflecting the sun but did not want to risk black because of the danger of window harm. This blocks light well. Installation is okay but the instructions to trim film once on window is not a good call. You risk harming a window seal and it's extremely difficult to get a straight cut. This is a heavier material which also makes cutting more difficult. It is sticking to the window fine so far.

Followed instructions and it is hopeless

it is very good but bit over priced according to size

Waste of money! The product came with holes on it and it is not at all black out!!! The light still comes through and it also doesn’t stick well on the window! Literally waste of money!

I put this up in my room and my toddlers room. Mine has been up almost 2 years, and other than peeling back a bit at the corners, it's stayed up very well. In my toddlers room I took it down at winter and put it back up once the days got longer again and there were no issues with it staying up, it was like new, really pleased.

muy bueno, totalmente opaco, no deja entrar nada de luz, justo lo que queria.