CYSKY Mountain Bike Crank Arm Set 170mm 175mm 104 BCD with Bottom Bracket Kit and Chainring Bolts for MTB BMX Road Bike, Compatible with Shimano, FSA, Gaint

I wrecked my old original FSA Comet crankset (tore the spider apart somehow) so I needed a cheap replacement, fast. This crankset delivered. Despite being 5mil shorter than my old crank, it worked perfectly and I don't notice much of a difference besides a slightly faster pedal stroke. Easy to install since it fit my old bottom bracket perfectly. It also actually comes with a bottom bracket, but since mine wasn't broke, I didn't bother with the new one. Besides that, it's a crank and does what it needs to. The arm bolts to the crank thru-axle with two allen bolts so you don't need any crazy tools to install it. The only 'cheap' part on this is the endcap which is plastic - however the cap doesn't serve much purpose besides sealing off the thru hole from mud so the plastic is fine. I've been learning how to bunny hop so I have been really hammering on this crankset (along with typical MTB trail rides) and it holds up amazingly well. I'm honestly kind of surprised because I had much lower expectations. Highly recommended. No frills packaging, but who cares, it was WAY less than 100$ and had it within a couple of days.

After reading the reviews, decided go with this iXF crankset for my Diamondback Overdrive 29er, and it was the best decision I made for it. I had to change out my original square-tapered BB anyways since it was knocking while riding and was loose feeling, and since I never use my front derailleur I decided on going with a cleaner 1x setup. The install was very easy & straight forward. Lots of good install videos out there to follow. Just make sure you're installing everything on a clean surface and use grease sparingly on the necessary areas. After installing everything and going out on quite a few rides already, I can say this crankset is definitely much stronger and can hold up to some good jumps that I've already put it through (with 230 lbs coming down hard on it when I'm standing on the pedals). Really good setup, especially for the price. If you’re building a budget 1x setup, this crankset is a great way to upgrade your bike without spending a lot. For reference, I'm using a JGbike Elite chainring, so my overall conversion cost was around $80 that included the Shimano BB I also purchased. I will admit that the BB that came with the kit looked fine, but I decided to upgrade that area and spend a few bucks more to get a Shimano hollowtech BB, and kept the included one as a spare. I can't say anything good or bad about the included BB since I didn't use it, but I did see a few reviews from people saying they started to experience some problems over time with it, so I decided to spend a little bit more on a known quality part in that area of my bike. Nothing against the crankset kit, just a personal decision.

The CYSKY Bike Crank Arm Set is a nicely packaged delivery of the Jiankun IXF Crankset. While this crankset is available from a variety of vendors, the CYSKY packaging and quick Amazon delivery make this a great choice. The crankset itself is solid, looks good, and was free of any real defects. As many have noted, the machined parts of the crankset are a little sharp, but for the most part it all works! The bottom bracket supplied feels silly light, but threaded nicely into my bike and so far has had done well. The setup has about 60 miles on it so far, and all is good. Paired it up with a JGBike chainring which fit like they were made to go together. You can find my unboxing of this set on the youtube user Quadsmack

This is my 2nd set of this crankset (used first one on a mtb). This one was for my SS bmx/cruiser. They work well, and are well made (at an excellent price!). That being said, I had to knock off one star for it not being quite as advertised. It is listed to fit 68-73mm. While it will FIT 68-73, it cannot be adjusted to BE 68mm. I wanted a 68mm crankset for a SS that has a 68mm bottom bracket. The splines and tension nut do not allow for a 68mm BB, you have to space it out to at least 70.5mm in order for it fit. I had to use one spacer on the non drive side (making it 70.5mm), so as not to deviate the chain line on the drive side (but making the pedal offset slightly wonky). It's a great crankset, but the description should read: "70.5-73mm crankset that fits INTO a 68-73mm bottom bracket". No spacers should imply 68mm (but this crankset does not allow that), two spacers (one on each side) should be 73mm, and three spacers for front derailer (two on drive side to clear derailer, one on non drive side). I get it, that it FITS 68-73mm, but it is not adjustable to (properly) BE a 68mm crankset since the splines/compression nut do not allow it. So... unless you need a single speed 110mm "old school" drop out (most city SS's, BMX, etc), this is a GREAT crankset (I LOVE it on my 9spd MTB!). If you plan on using it on a SS/110 dropout... you're going to have to offset it like I did (single spacer on non drive side).