APC Smart-UPS SMC - SMC1000I - Uninterruptible Power Supply 1000VA (Line Interactive, AVR, 8 Outlets IEC-C13, Shutdown Software)

I am so pleased I chose this replacement for my old Belkin unit that went bang after many years of good service. It is well made and easy to operate and configure. The USB interface is simple and it controls my Synology DS 1513+ which in turn is configured to send notifications to Windows 10 machines to shut them down gracefully via a utility called Winnut.. Testing the unit by simulating a mains failure revealed that it has a good capacity to keep going without making much noise . My system ran for 90 minutes shutting down a single PC and monitor after 10minutes and the synology box at the end of the 90 minute span. It runs quietly too when on standby. Overall I feel it is a good quality unit and although it costs more than other units claiming similar specs. I feel comfortable that I can expect a few good years service from this robust looking unit.

easy the fit new batteries

Received this yesterday seems really good. Would have given it 5 stars but didn't come with a lightning connector for my iPad and iPhone

I did own a Trust UPS, which after many year's service would not power my computers in the event of a power fail.Looking at the poor reviews Trend get and the good reviews APC get, I decided on an APC replacement.I paid the extra as somewhere in the documentation it said the output on the Smart series was a pure sine wave which I understand is needed for some computer power supplies.It worked a treat and I am well pleased with the UPS.So far I haven't tested running on power fail.The 1500VA model is a total overkill for my two PC's and an inkjet printer, as they only draw 300VA in total.

The business version of the Powerchute software does not alert me when using Windows 7 Home. I have to rely on the alarm from the UPS.My (Powerchute Business Edition Software) does not inform me the ups (SMC1500I) has switch over to the battery.My old BR1500GI - APC Pro 1500 came with Powerchute Personal Edition Software. This software informed me that the UPS had switched over to the battery. A popup message appears on windows 7.

A lot of money but you get a lot of kit for the price. Will run my overclocked i7 PC (with 4 HD's and 1 SSD) plus 2 x 24 inch monitors also my router and NAS device for over an hour on the battery (tested this and I will get the quoted 67 minutes it calculates,Looks good, it quiet and does the job perfectly. Have a few issues with the local power and this has been perfect - as I have come to expect from APC.

Bought to replace an ageing 1500 unit (7 years old). Having the front display is a very nice feature - enabling you to monitor battery level and load used without having to install the software console or connect to it remotely - especially useful as I am using this to power a CCTV system. As always the APC unit is high quality and it looks nice rack mounted with the included rails and ears.

This arrived fast and was a perfect replacement for my old UPS.Definitely one of the better models for a small office or home use.

Marre de quelques coupures qui à force abiment un disque dur par ci, un disque dur par là.Attention, l'autonomie en pleine utilisation n'est pas formidable, mais on a le temps de couper proprement au besoin (et de l'automatiser).Je bosse toute la journée sur un PC (type gamer) qui mange pas mal, 3 écran 24 pouces, un NAS 4 disques syno et bien sûr la box, sinon, les appareils ne peuvent plus communiquer...L'onduleur est directement cablé en USB sur le NAS synology (ds416 play) et se coupe au besoin, idem pour le PC, mais là il faut en passer par des softs plus ou moins moisis.Si le PC n'est pas allumé, l'autonomie sera de plusieurs dizaines de minutes. Si le PC est allumé, j'en doute fort ; je n'ai pas mesuré complètement le temps.

Die USV an sich ist gut, allerdings lässt sie sich nur sehr rudimentär mit APCUPSD und alternativen Tools betreiben. Per USB kann man nur den Ladezustand in Prozent, Restlaufzeit und Status (online/offline) auslesen. Laufzeitkalibrierung, Akkuwechsel-Datum und tatsächlich gemessene Last lassen sich nicht durchführen/auslesen.Dafür benötigt man die PowerChute-Software, die aber nicht auf dem Raspberry Pi läuft. APC möchte sein neues proprietäres Kommunikationsprotokoll (Microlink) auch nicht offen legen, sodass andere Tools wie apcupsd damit klarkommen könnten. Und das Modbus-Protokoll, womit oben genannte Funktionen gehen würden, möchte APC bei dieser Serie auch nicht unterstützen. Die USV verdient den Namen "Smart" also nicht wirklich. Aus diesem Grund kann ich eigentlich von der gesamten SMC-Serie nur abraten.

Ottimo gruppo di continuità..io lo uso per alimentare una stufa idropellet 30kw..in accensione la stufa ha un consumo di watt elevato che ne riduce l autonomia a circa 15 minuti..ma se entra in funzione con stufa avviata e ventilazione automatica ho circa 75 minuti di autonomia..lo consiglio per l onda pura che non fà sentire nessuno sbalzo all eletronica anche più sofisticata/sensibile..ottimo dunque per aumentarebla durata della vita di questi componenti che inolte son protetti anche da eventuali fulmini..la sua qualità non si diascute..il suo prezzo elevato(ci sono prodotti lowcost)è ampiamente giustificato e ripagato nel tempo dalla sua affidabilità e longevità..lo consiglio

El APC es muy fácil de configurar y con el suministro de electricidad en España cuando llueve, una buena inversión.

Fait le job