TEKXYZ Telescoping Balloon Stand Set of 4, 1.5ft to 7ft Free Adjustable Metal Balloon Column Stand for Party Decorations

Great product. Love the telescoping rods. Makes it easy to customize the height. I suggest using 8in or larger balloons to get to the full height with the included number of disks included.

I bought this as decoration for my daughter's birthday. I would absolutely purchase this again and here is why. Even with my arthritic hands I was able to inflate using a hand pump and assemble 2 almost 5-foot towers in 1.5 hours using 9- and 12-inch balloons. For me the hardest part was pumping the balloons and tying them off. I included a picture of the plastic ring you slide the balloons onto. There are five spaces outside the circle and five spaces inside the circle. This allowed me to try different patterns with different size balloons. The rings of balloons are placed on a telescoping rod that screws easily into the base panel. The pole is sturdy and the telescoping feature allows you to slide the tower up and down to any height between 1.5 feet and 7 feet. There is a screw on cap at the top of the pole that allows you to adjust how tightly compressed down the balloon rings are as well as you can attach topper balloons and/or decorations to the cap. What makes the tower stable and allows the hanging of banners between the towers is the sturdy water base bag included. My hands had a little trouble pushing the tab in to close the bag. Water gushed out as I was pushing in. As one product reviewer notes, a screw on cap would be better/easier. If that bag is not used, the base is not sturdy enough to allow banner/streamer hanging or for a tower to remain upright in a light breeze. I would not use this outside without a weight on the bottom plate. While the bag is sturdy and reusable, if it becomes punctured or the tab does not close the bag you could use bricks, flat stepping stones, lifting weights, gallon zip lock bags filled with water/sand, etc., to hold the tower. Came with a mostly pictorial instruction manual which had large easily seen and, I believe, easily understood pictures to follow. All components of this product are definitely reusable. Lesson Learned #1: If you are not building in place and are building a compressed design to the full height, I would suggest leaving about four inches at the top so you have room below to push the balloon filled rings up enough near the bottom to get your hand into your creation to lift and carry it. The telescoping pole is strong enough to be lifted/carried with the water bag in place. Building solidly to the top, it was hard for me to get my hand in to lift and carry it at completion. Lesson Learned #2: This hint may be obvious but I learned when sliding the balloon onto the ring, I used the fingers of one hand to pull the knot end to stretch and thin it down so the ring could quickly and easily slide along. If I did not do this I could still attach the balloons it just took my arthritic hands a little more work. Also, attach/slide between the very end of the balloon and the knot, not the knot towards the air-filled balloon. I did tear 3 balloons while attaching to the ring and the ones I attached between the knot and the air-filled balloon let the air out of the balloon; conversely, attaching between the end and the knot allowed the balloon to still be used if it tore. This is contrary to what the seller is currently showing in the pictures. I can also see how the rings can be used individually to create small balloon bouquets for table centerpiece/decoration. I can also see using long balloons for a shaggy tower. I can create various types and shapes of balloon trees with this product. There is a lot you can do with this sturdy reusable product!

Pros Easy to put together lightweight Breaks down into a small box for storage Height adjustable Great design Can hold a lot of balloons Quality seems great so far Cons Will need additional weights depending on placement. ( I placed a 20 pound weight on the base then screwed in the telescoping pole instead of using the provided water/sand bag. ) The telescoping pole doesn’t lock into position when completely extended. ( If you don’t used the provided balloon holders and just affix the balloon’s straight to the pole, the pole will compact as you push the balloons down to close any gaps.)

Bought these for a fundraiser and they were very easy to assemble and looked really nice. Filling the water in the base was easy and emptying it after was just as easy. Love that you can adjust the size of the stands as well.

Great and easy

I was going to pay someone to make columns for my daughter's party, then decided at the last minute to save money and DIY. These stands made it SO EASY. They have clips that hold the balloons in place and make it fast to add the balloons to the poles. My columns weren't as fancy as the woman's who I was going to hire to make them, but these still worked out great. The water bag weights were not great, though. We could not get the rubber plugs to close shut. Caps would have been better. You definitely need weight on these if they are going outside. Any slight breeze and they were coming down. We secured ours to a handrail since the water weights weren't working, but ideally if you had weight plates for like lifting bar weights that would be perfect since you could slide the hole down the pole to the bottom and pile the balloons on top of it. Overall, it was worth the cost and looked great.

We bought this set of 4 telescoping balloon stands for our daughter’s graduation party, and they were one of the BEST purchases we made - hands down! They really helped complete the overall design and made the decorations feel FUN!. I love that each stand is adjustable from 1.5 feet all the way up to 7 feet — it gave us so much flexibility to create height and dimension in the space. They’re also easy to break down and store, which is a huge plus for future use. The quality exceeded my expectations for the price — the value is absolutely 5 stars. Super easy to set up and use, and they made decorating so much simpler. I can’t wait to use them for every party from now on!

These are so cool! You could really pull off your own DIY towers with these balloon stands. They are easy to use and come with everything you need to build a balloon tower.

Très facile à monter. Extensible a souhait jusqu'à plus de 2 mètres

届いた商品はキッチリ箱に入っており、商品の状態も良かったです。まだ使用はしていませんが、組み立てて伸ばしたところ十分安定感があり、コスパも良さそうです！そのまま箱に戻して収納しています。

I recently used the TEKXYZ Telescoping Balloon Stand Set for my child’s 1st birthday party, and I was thoroughly impressed with both the quality and functionality of these stands. From the moment I opened the box, it was clear that this was a well-made and thoughtfully designed product. Setup was incredibly easy, I was able to assemble both stands in just a few minutes without any need for tools or instructions. The telescoping design made it simple to adjust the height exactly as needed (from a subtle centerpiece to a dramatic full height of over 2 meters), which allowed me to customize the look depending on the area of the party. One of the biggest concerns I had before purchasing was whether the stands would be sturdy enough to hold a full set of balloons without tipping over, especially since we had both indoor and outdoor elements during the party. I’m happy to report that they held up perfectly! Even with a breeze outside, the bases kept them stable, and there was no worry about them blowing over or wobbling. After the party, disassembly was just as easy as the setup. The stands collapsed down into a compact size, making them easy to store without taking up much space. I love that I can reuse them for future parties – they’re clearly built to last and offer great value compared to disposable or flimsier alternatives. Overall, this balloon stand set added a professional, polished touch to our party decorations with minimal effort. Whether you're hosting a birthday, baby shower, wedding, or any celebration, I would absolutely recommend this product. Sturdy, stylish, and reusable, it’s everything I hoped for and more!

These balloon stands are fabulous, great quality, east to install and very stable once balloons completed.will be using for many occasions to come.

Las usamos para montar varias torres de globos de alturas diferentes para la comunión y quedaron genial. La base se puede llenar de agua,arena...para hacer contrapeso. Todo genial. Vienen en una caja desmontados fácil de transportar