Archer BE24000 Quad-Band WiFi 7 Router (Archer BE900) with Dual 10 Gbps Multi-Gig Ethernet Ports and LED Touch Screen,12 High Performance Antennas, VPN Supported, Free Expert Help

After less than 3 years with my prior router from a different brand, its signal strength was noticeably declining and then 2 months ago I received an email from the manufacturer saying that it would not longer be supported and may stop working entirely. That was the context for searching out and ordering this TP-Link remote router for my office and I am very happy with its improved performance compared to the unit it has replaced. I have the router installed in my home office, in a separate building about 100' from my house. This router is connected to our main modem in the house through a 200' LAN cable which works perfectly. Setup was extremely easy - I followed the instructions precisely, step by step, and it hooked right up. The password strength is both satisfactory ... and not so darned complicated that it's difficult to enter as required. The strength of the signal is much better than what I had before, easily crossing the back yard and allowing connectivity from rooms facing from inside the main house. It also allows good, fast signal through a metal porch roof which wasn't possible previously. As much as I was frustrated with having to replace a unit that wasn't old enough to reasonably fail, it was completely worth it for the improved performance this has brought for my home office. As advertised; full marks!

This router completely transformed my home network. Setup through the TP-Link app was very straightforward—plug it in, follow the prompts, and I had my main network, guest network, and basic security settings configured in just a few minutes. The interface is clean enough for non-techy users but still has plenty of advanced options if you want to tweak channels, bands, or QoS. Performance-wise, it’s a beast. WiFi coverage is strong across the whole house, including rooms that used to be dead zones. Devices connect quickly and stay connected, and even with multiple 4K streams, online gaming, and a bunch of smart home devices, everything stays smooth. Latency is noticeably lower and large downloads finish much faster compared to my older router. I also appreciate little touches like the ability to easily see which devices are connected and put limits or priorities on them. The hardware feels solid and runs surprisingly cool for how powerful it is. It’s definitely not the cheapest router out there, but if you have a lot of devices or fast internet and want to actually use all of that speed reliably, this is worth it.

I come from old-skool DD-WRT days, manual configs, and pretty much the router is supposed to route, and other devices do the rest (DHCP/DNS/Anything else). This fit the bill perfectly, could config it the way i wanted to. Sits in a brick house, so can't speak much to signal, as distance is limited by physical barriers that will block signal. Good value for what it is, easy to set up and use, looks much better than the WRT-54G's of yesteryear. Probably can travel with it, but I wouldn't think most people would. Peculiar notes - Offers 3 different SSID's to config, with 5GHz and 2.4GHz options for a total of 6 if you'd like. While this may be a feature or an annoyance, that's up to your use. It's there if you want to use all 3(6). I turned em all on, and seem to have confused everyone in my house. Especially with ISP's wifi router that can not be configured as easily. MAC address can be cloned if you would like to replace your ISP's wifi router to their network, if they check the MAC on the device for access.

My rating is 4 stars, for now. I'll get into my reasons further down. First my criteria for choosing the TPLink Archer router. 1. Repalce ATT fiber Nokia BGW320-505 ONT with an actual router. (Bypassing my ISP hardware with my own) 2. It must have multiple 10GB SFP+ & Eth ports. (More on this, later) TPLink is somewhat limited here vs Protectli Vault. 3. I wanted a device with better wifi capabilities built into it compared to the ATT ONT. (This overshadows the Protectcli Vault imo) The TPLink Archer met my overall criteria for the most part. Primarily becasue I didn't have to comprimse too much in any one place. Positives: 1. After careful consideration, this offered more 10GB ports albiet one less than I wanted but with the wifi performance it is more of a bargin than a Protectli Vault. 2. After programming my SFP+ ONT (ODI) stick, I was surprised to find out the fiber bypass worked so quickly. I was skeptical this router would not work with my desired plan. (With a caveat or two, see negatives) 3. The softwre is simple and user-friendly as is its layout. It is easy to navigate.(This is a positive and negative) 4. The Wifi menu is thorough and thoughtfully laid out. This was a breeze to setup. 5. Performance, both Ethernet and Wifi outperforms my ISP equipment. Wifi is at least a 30% increase with better range. 6. It does have an asthetically pleasing appearance, it is somewhat light-weight but it feels nice. 7. I couldn't care less about the touch-screen but it adds a certain flair. I suppose seeing the speeds, client connections and weather is kind of a trick addition I've never seen before. Negatives: 1. One 10GB SFP+, two 10GBE (rj45) ports, four 2.5GBE ports.(I would have preverferred two 10GB SFP+) and two-four 10GBE rj45 and two 2.5GBE rj45s. 2. The SFP+ and one 10GBE rj45 ports are linked meaning you cannot use both simultaneously. This cannot be reconfigured in the software, it is one or the other and this is disappointing because I wanted at least two (available/open 10GB ports) whether rj45 or sfp+. 3. The ports cannot be reconfigured inside the software. 4. The stupid guided novice-based software sure is not tech friendly, either. Meaning you have a limited scope in which to configure absolute control. 5. Some preconfigured items must be checked enabled/disabled to allow certain advanced options to become available. Again, not tech focued on control but more novice guidance. 6. The removal of known technical nomenclature have been replaced with every day public jargon. Not once is 'WAN' mentioned and I struggled to determine what the interface was referring to when attempting to configure my WAN port and setup a VLAN. This was especially frustrating. 7. Lack of total customaization vs a PFSense setup. 8. Compared to the Protectcli and a PFSense, the ports are hard-coded for specific use, the user is unable to fully take advantage and configure the ports individually as desired. 9. Router modes. I'm confused by this. In days of old, routers would be routers regardless of a mode, you would have wifi configured or not, regardless it had antennas and the hardware to support wifi. I find this to be useless and quite frankly a waste of time because the router must be in one or the other mode. If in wifi only (access point) mode, you cannot access any actual routing features. Why? 10. The reboot times, 5 minutes. One may look at the negatives and think I made the wrong choice. The fact this is working with the fiber bypass and I have a 10GBE uplink to my 10GB switch with having better wifi coverage and performance is really all I was after. Because I was able to reach my goal and desired setup and coming in at $300 less than a custom built router, I'm happy for now. But because the lacking advanced software features, I still would prefer to have a custom router running PFSense and have a 10GBSFP+ uplink wan and a 10GBSFP+ lan fiber connections and do away entirely with copper.

I got a new iPhone 16 Pro which supports Wifi 7, so I decided to buy a Wifi 7 router. The BE24000 is pricey at regular price, but Amazon had it for $225 less during the recent Prime Day. I would recommend waiting for a big sale day because this router is worth the additional cost over a slower router. First, SpeedTest on WiFi equals my *wired* speeds. On my broadband 1Gbit connection, I get 24-26 ping and 1040 Mbit/s for both wired and WiFi. My desktop has Wifi 6E, and both it and my iPhone 16 Pro get those speeds over Wifi in the same room with the router on the 6G band. So WiFi is now equal to wired for getting top speed from your internet. Second, setup took less than 5 minutes. I do have nearly 10 years experience setting up TP-Link routers because they are my preferred brand. (Asus routers come in a close second. I have both on the network.) The TP-Link wizard for setting up the router asks a few questions and then handles everything else. The"Quick Setup" instructions in the box walk you through everything. Third, so far, I haven't been able to saturate the Wifi network with 4 TVs streaming 4k content at the same time. The signal strength is good everywhere in my 4000 sq ft home with the router centrally located in roughly the center of the second floor. If you need to add mesh routers, this router can be the central hub. Fourth, the IOT network is enabled by clicking on a single button. Then you tell your IOT devices, eg smart bulbs, Ring cameras, smartlocks, Nest thermostats, etc., to connect to "TP-Link_IoT_xxxx". This network is separate from your main wifi so the devices are not entry points for hackers. Because IOT devices often do not have robust security because they have simple computers in them, they have become easy targets for hackers. Using a separate WiFi network for them adds a layer of protection for the rest of the devices in your home. The only negative I have is the LED display. I am not a fan. Fortunately, you can turn it off. There is also a "night mode" which you can schedule to turn off all the lights at a specific time. Same with the touchscreen display. I leave the touchscreen on because it shows useful info about the CPU load. I don't think I would buy this router at regular price, but I am quite happy with the sales price given how powerful it is and how many features it has.

If you want a router that is as future-proof as possible while delivering great real-world performance and EasyMesh support, this is the one to get. I previously tried a TP-Link gaming router that I thought would do everything this one does. Instead, I got weaker and less stable WiFi in exchange for it looking like a spaceship and coming with a bunch of AI gaming QoS features that are mostly useless in real setups. In most cases, you should not be using QoS at all anyway. This router has been far more stable, has better signal strength, and has been much less of a headache overall. Do yourself a favor and get the non-gaming version. You will get better performance without the gimmicks. The little pixel screen is fun but kind of pointless. I would have preferred it not be there in exchange for a lower price, but it is still fun to mess with and write things on. Also, for those who care, this is an AMAZING Steamlink router even through multiple rooms. Can confirm, very low latency and packet loss.

For configuring this baby I connected my laptop to it with a cat 8 cable and then right into advanced settings. It was very easy to configure just the way I wanted it. The configuration interface is simple and straight forward and offers help buttons for things a person might not understand. I have a 3500 sq foot home, half of that being the basement. The signal is all bars in every corner of the house, which is better than the TP-Link AX11000 I replaced with this one. If you want a quality WIFI 7 router, this is it.

They need to break up reviews based on models... BE24000 A month in and I'm very happy so far. Long time netgear nighthawk user and while some worked better then others the newer versions have been spotty. I purchased the latest and greatest (RS700s) at about the same price as this 24000. Tested great and 5min later slowed, rebooted or plain disconnected. Done with Netgear for good. I can't find the number of devices "supported". Other brands list up to 20,40,200 etc. I have between 35 and 45 devices connected at a time, while many use limited bandwidth my worry was the sheer number of devices were causing some of my issues. No problems with this. User interface, app, ip site and even led screen on the device itself are easy to interpret and user friendly. Preferred over the netgear option. I consistently run at 25% ram on the router (2gb, highest I've seen on a router). Download speeds heavily rely on distance to router and band you're on. I get close to 1g down and up on a fiber network through wireless on my phone in both the 5G and now 6G. You're able to split up channels with 1x 2.4G 2x 5G and 1x 6G or merg them, they can be named the same or seprate with passwords. I tried MLO network feature, worth reading up on (multi link operation) but it seemed to throw off my smart devices, many of which only function on a 2.4 channel. Pretty customizable by end user with limited tech savy. The IoT network is a nice idea but I don't use it. Qos is also nice and available on most routers now but unnecessary if your IP maintains 400mbps speeds. I do use it on 3 devices but doubt it affects much. Reception is also a win.. on my furthest devices I was getting 40-70% signal with older routers and this is above 75 at all times. This includes the RS700s returned router at this price point which was abysmal even a room away. The Mesh networks which this 24k claims to support may be good but 1 single router simplifies the process and should be pretty stable and strong depending on building for up to the stated 2500sqft. At 2k my house is fully supported and the hassle I had with range extenders (netgear) in the past is something I wanted to avoid. Looks good, screens cool.. So far it functions flawlessly and thats how I choose a router.