NEEWER Metal Phone Tripod Mount Adapter with Arca QR Base, Cold Shoe, 360° Swivel 180° Tilt, Phone Holder Compatible with iPhone 15 Pro Max Galaxy S24

This phone holder quality surprised me. It was much welcomed. It’s really well designed, feels solid. It’s a high quality part, very easy to use - has weight to it, the unit when you turn, has precession, you can feel each turn click into place - the turrets that tighten the swivel is soft but holds in place firmly. Everything is good to the touch and feel. It fits well with my phone when attached to a CamCaddie - I don’t feel like it will slip off once tighten down. Feel confident with the material and design. You can use this in many different applications. The 2 hot shoes is amazing add on. This is a keeper.

This is a great mount! Price to quality is great. It works exactly as described. Strong tension to hold even large heavy phones like the latest Samsung Note. The body is light yet strong. Each pivot point feel secure when tightened fully.

The media could not be loaded. My DSLR gets used a few times a year to take family pictures around the holidays. However, everyone also wants iPhone pictures they can immediately post and share. This phone mount works great with the DSLR tripod I already have out, and when paired with a cheap bluetooth remote for the phone (or an iWatch) I can quickly switch between camera and phone.I'm sure there are likely cheaper mounts out there, but this one- is all metal,- has good adjustability- has large thumbscrews- fits standard quick-release tripod mounts (or 1/4 and 5/8 screw mounts if you don't have quick release)- includes a simple "kickstand" on the back to hold the phone on a desktop.I had no issues getting a secure grip on my iPhone 15 in a regular bumper case. You may have to offset it slightly to avoid pressing buttons, but this isn't a problem.The kickstand is a bit narrow. Flipped forward the phone can sit upright, flipped back it can be angled up. If you're buying it primarily to use the desktop feature, there are better options but it is a nice +1 feature.All in all, I would definitely purchase again.

really high quality phone mount, especially for the price. The ability to rotate and lock with all the shoe mounts is super helpful. The only potential downside could be that it's a little on the heavy side, but personally that gives me confidence in its reliability

NEEWER Smartphone Tripod Mount Aluminum Alloy, 360° Rotatable Phone Holder with Cold Shoe Mount and Arca Type Base Compatible with ... 2.6”–4” Wide SmartphonesASIN B0BLBZHMXWSold by XingBoom, shipped by AmazonI really like most aspects of this smartphone mount, so I don't want to write a negative review. However, there is an important aspect that I hope will be improved.The effective jaw depth is only 0.5 inch (~1.27 cm), from the top of the rubbery clamp pad down to the rubber pad on the base of the clamp. The thickness of the Otterbox case for my Pixel 5a 5G also is 0.5 inch, at the only practical area on the case that avoids the phone's side buttons and lenses. The top of the case is slightly beveled, reducing its effective thickness; therefore, the mount can be used.Unfortunately, there is not enough safety margin. If the phone is clamped with a reasonable amount of force, so the phone won't be crushed, it is not difficult to twist the phone out of the clamp. If the phone is bumped a few times, it could fall out of the clamp. Without the Otterbox case, my phone sits farther down in the clamp, where my phone is held securely and without much freedom to wiggle -- but of course, I want my phone to remain in its case.I think the height of the jaws and jaw pads should be increased by at least 0.1 inch (0.25 cm). Maybe the clamp width could be increased from 1 inch to 1.25 inches (2.5 to 3.2 cm). The jaw pads should have higher friction, and the pad width should cover the entire jaw width, to prevent the phone from working out of the clamp jaws. The corners of the jaw pads should be more rectangular than round, to maximize the contact area and resistance to bumping. The rubber pad on the base should extend farther along the base. Maybe the design goal was to advertise a maximum phone width of 4.0 inches, but I think that is much less important than extra security. (I am thinking about how to add an aluminum lip above each jaw; I just need a precision drill press and a tap ...)One side of the pivot (knuckle) that holds the folding foot extension is slightly too close to the bottom of the foot. This isn't a problem when using the folding foot for increased stability without a tripod. I don't know if there could be a minor problem when using an Arca-type clamp. There is no perceptible play (slop) in the pivot, which is good.Except as mentioned above, the Neewer mount is excellent, well made, sturdy, versatile, and attractive. There is a 1/4" threaded hole in the head of the clamp screw, and a cold shoe and 1/4" threaded hole in the Arca-type end of the clamp.(The Ulanzi ST-14 appears to have the same effective jaw height as the Neewer, but slightly wider rubber jaw pads. The Ulanzi has no 1/4" threaded hole in the clamp screw, and I see no indication that the Arca-type end of the clamp includes any 1/4" threaded hole.)

I purchased this to go with my Neewer desktop tripod. Solid aluminum, phone clamp. I use this with my Samsung Galaxy phone with case - no issues. Phone is very secure. I highly recommend.

A solid and well made cellphone holder for tripod mounting. Rubber clamp inserts and back pad prevent scratches to the phone. I did find the spring mounted clamp somewhat awkward to use, but it does hold securely. I like that it is all metal so should last a long time if used properly. Highly recommended.

THIS is THE phone tripod mount that I've been looking for. Solid construction, great design, and easy to use.This thing feels and operates like it should cost double. I've used various NEEWER products in the past. Typically very budget-friendly costs with acceptable quality. This product however, raises the bar on their ability to provide great products at a reasonable cost.