10 Pound Titanium Gray DOMINATOR Polymeric Sand with Revolutionary Ceramic Flex Technology for Stabilizing Paver Joints/Gaps, 1/8” up to 4”, Professional Grade Results

An outer course of pavers shifted a little and opened up the sanded gap between it and the next course. I cleaned & re-sanded this section and have not had a problem since.

I used this for a 240 square foot patio made of 1 foot pavers. Put down 3 - 4 inches of decomposed granite and used a plate compactor (rented from HD) to make sure it was solid. Then a 1 inch layer of sand to set the pavers. Set them in and lightly tamped them in. Just left a 1/8 inch gap between the pavers. They felt "loose" when walking on them, even though the base was very firm, they'd move slightly when walking. I had planned on using another brand of poly sand, but when I looked at the instructions, the stuff available locally said it was for 1/4 inch or larger gaps. I found this Dominator Polymeric sand at Amazon, it had good reviews, and said it could be used for 1/8 gaps. So I bought the 45 lb bucket. Installation was pretty simple: Spread the sand over the pavers, then sweep it into the gaps. I used a 24" push broom with fairly still bristles. Keep spreading sand and sweeping until the gaps are full. I found that going across the gaps at an angle worked best. When the gaps are full, sweep the excess off. Then use a leaf blower to get the remaining dust. Use the leaf blower LIGHTLY so you don't blow the sand out of the gaps! Following the instructions, I used a hose set on shower to spray small sections (about 8x10) at a time. Spray for 15 - 20 seconds until water just starts to pool on the sand, then stop and wait about 30 seconds. Then spray it a second time. It only took about 5 minutes to do my 240 square feet. I again used a leaf blower to blow any sand residue off the top of the pavers. To be honest, I don't think that made a difference on my concrete pavers, as I used the Titanium color, which perfectly matched the pavers. I don't think I did a good job with the second round of blowing, but there are no stains anywhere. That's it. Done. And when walking on the pavers immediately afterwards, they were SOLID! The sand was still wet, but this stuff really locked the pavers into place! And the next day, after the sand had cured more, it was even more solid. The stuff sets up almost like a good silicone sealant; it's flexible, but it's kinda glues the pavers together. I had about a 1/4 inch gap around the perimeter of the pavers, between the pavers and the aluminum edging I used, and (about 2 weeks later) you can press your finger into those spots and it's still kind of flexible. Solid, but flexible. It feels like it'll stay that way for years. And the pavers don't move around - at all! We moved our patio furniture onto it, and use it daily. The 45 lb bucket was just enough to do our 240 square foot patio with 12 inch paver with 1/8 inch gaps. And I mean just barely. If you have bigger gaps or smaller pavers, you'd need more. Yes, it's fairly expensive compared to the kind at the big box stores, but it's worth every penny. If you're doing pavers, don't even think about getting something else - this stuff is awesome!

Dispendieux mais vaut le coût. Les instructions sont simples et claires et la qualité du produit donne un résultat impeccable. Notez que ça prend une bonne journée pour que le produit sèche et durcisse complètement.

I was unable to find the Permasand product from Sakrete and so opted for this product. It’s perfect in color and in performance.

Perfect size for what I needed! I usually end up buying a bigger bag and then have to store the rest.